Maintenance of Emergency 11 KV Lines of Ukai Thermal Power Station GSECL (WT-5080 Switchyard TPS).

Erection of PSC pole of 8 Meter 200 Kg including excavation of pit and refilling of earth, fixing of x-arm, top fitting clamps, anticlimbing devices, insulator etc. complete & painting of fabricated materials used on pole and numbering and Installation of Earthing wire to new erected pole.

Erection of steel of pole of 8 to 9 and 11 meter including excavation of pit & refilling of earth fixing of x-arm, top fitting clamps, anticlimbing devices, Insulator etc. complete & painting of fabricated materials used on the pole and numbering and Installation of Earthing wire to new erected pole.

Erection of guy set including excavation of pits and refilling of earth as per standard specification with stay clamp, stay wire, anchor rod, Turn buckle, eyebolt, guy insulator, cement concrete block but excluding concreting.

Concreting & muffing of pole, guys, etc. including cost of cement, sand and metal (1:2:4) and water etc. as per standard specification. The water to be provide to this concreting area up to two days after preparation of concreting area.

Stringing of 30 mm2 ACSR/34 mm2,55mm2 AAAC conductor for 11KV lines including fixing of insulators, binding Jumpering etc. (ONE COND PER KM)

Dismantling of PSC pole including excavation, refilling of earth. All fabricated material insulators etc. should be dismantled and to be credited separately at TPS switchyard.

Dismantling of steel pole including excavation, refilling of earth. All fabricated material insulators etc. should be dismantled and to be credited separately at TPS switchyard.

Replacement of one/both 11KV disc insulators at straight/shackle points.

Replacement of old jumper & providing new double jumper of HT Line (11 KV) 8" binding & capsuling and binding with PVC pipe etc.

Pin binding of conductor 11 KV pin insulator per pole

Replacement of 11 KV Pin insulators with providing new double pin binding by new one.

Re fixing/ Replacement of V cross arm in proper position.

Re fixing / Replacement of top fitting in proper position

Cutting of tree branches near 11KV line. (per tree).

Adjusting tension in the existing stay wire including replacement of existing materials as per required condition. (Stay set)

Replacement/Repair of 11 KV AB switch with fabrication and insulated color code jumper, binding, lugs and complete fitting in normal position, Color for this work to be provided by party.

Providing DO fuse with cating & jumpering.

Re-sagging the spans between the two stain points including cross arm and top fitting with binding and jumpering.

Dismantling of conductor of 55 mm2 AAAC from 11kv HT line and crediting the same at Thermal Power Station Store, as per instruction of Engineer in charge.

Filling complete 11 KV XLPE cable end joint kit/straight joint kit with all its accessories by removing old kit with new one.

11 KV Line Patrolling

Various fabrication works in 11KV line & switchyard section as per instruction of EIC.