REPAIR TO ROOF SHEET, FLOORING, TILING AND SANITARY FITTINGS AT KOTDWARA UNDER AGE(I) LANSDOWNE .

Amount

Dismantling of plain or corrugated steel sheeting , any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F in repairs E-boards, ceiling, 4 mm thick with J framed work with main Tee of size 24 x 28.5 mm made out of PGI sheet .3 mm thick double at web and single at flange, flange coverd with powder coated sheet 0.25 mm thick and wall angle 24 x 24 x .45 mm powder coated for ceiling , ceiling boards 60cm x 60cm x 4mm thick , suspended with GI wire 2mm dia and 2m average length with adjustable hanging device complete including plugging in brick/stone walls with steel rawl plug @ 600 mm C/C Ceiling board shall be pressed to the ceiling tee with staple clips at all four sides and incl making good of all disturbed/daimage surface of walls and applying two coat of oil bound distemper complete all as specified and directed.

Dismantling timber in scantling 40Sqcm and over in section unframed work in any position complete all as specified and directed.

Dismantling timber in scantling under 40Sqcm in section unframed work in any position complete all as specified and directed.

S&F 2nd class hardwood plain fillets square rectangular/triangular in section clean sawn secured with nails sectional area exc 13 sqcm but n exc 25 sqcm complete all as specified and directed.

M&L for second class hardwood (SAL) scantling clean swan in wooden scantling etc complete all as specified and directed.

Taking down Chowkats or Frame with shutter(without taking of shutter from the frame) exc. 1.50 Sqm but n exc 4 Sqm complete all as specified and directed.

Taking down chowkhat or frame n.exc 1.5 sqm with shutter (without taking off shutter from the frame) each and removing from site complete all as specified and directed.

S&F 2nd class H/W plain solid straight chowkhat or frame, wrought framed rebated on the solid, rounded or chamfered put together with flue pinned at joints etc and in position complete all as specified and directed.

M&L for 30mm thick second class hard wood factory made glazed and skelton windows shutters open rebated & prepared to receive glass all as specified in SSR Part-I section 8, clause 8.24 (b) complete all as specified and directed.

M&L for 35mm thick second class hardwood Factory made glazed and skelton door shutters open rebated and prepared to receive glass gauge etc edges of framing plain chamfered or rounded with cut and mitred beads for securing glass/gauges etc with sashbars size of members of shutter as specified in SSR Part-I section 8, clause 8.24 (a) complete all as specified and directed.

M&L for 40mm thick second class factory made Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkats complete all as specified and directed.

Taking down Shutters of any description n.exc 1 Sqm each complete all as specified and directed.

M&Lfor 12mm thick as in repair particle board medium dinsity ,flat pressed ,single line layer type or three layer type with BWR type adhesive ,fixed with screw to timber/steel frame work as in cup board shelves partion etc complete all as specified and directed.

S&F 50mm butt hinges medium cold rolled mild steel complete all as specified and directed.

S&F 100 mm butt hinges mild steel cold rolled medium weight complete all as specified and directed.

S&F aluminum anodised barrel tower bolt 300mm long of extructed section complete all as specified and directed.

S&F aluminum alloys anodised sliding door bolt with hasp, staples 300MM (Bolt Type) and fixing clip of sheet cast or extructed section and fixing bolt and sliding bolt of extructed section or cast aluminum alloys complete all as specified and directed.

S&F 125mm hasp and staples,aluminium anodized including bolt to hinges plate and fixed with screws complete all as specified and directed.

S&F aluminum anodised handle cast type 125 mm, anodised complete all as specified and directed.

S&F aluminum anodised handle cast type 150 mm, anodised complete all as specified and directed.

M&L two coat of synthetic enamel paint over new wooden surfaces of any description not otherwise described over 10cm in width or grith over one coat of pink primer including preparation of surfaces complete all as specified and directed.

Supply only Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S & F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples complete all as specified and directed..

Hacking out old broken glass(any thickness, size, quality or description) from wooden / steel frames, glazed with putty or fixed with beads for upto two storey building complete all as specified and directed.

S&F Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane , 3.0 mm thick for upto two storey building complete all as specified and directed.

Demolition of brickwork built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified and directed.

M & L for brick work with sub class old size , straight or curved on plan exc 6 m mean radius , built in cement mortor 1:4 complete all as specified and directed.

M&L for Brick work with sub class ‘B’ brick, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

M&L preparing of new plastered or un plastered surface of walls and applying two coats of white wash/colour wash complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:4 on stone masonry surfaces or surfaces other than fair faces of brick work, finished fair ans smooth without using extra cement complete all as specified and directed.

Demolition of unreinforced cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for providing cement concrete type B1 1:2:4 ( using 20mm graded aggregate) in roof kerb or mud stops. hold fast etc complete all as specified and directed.

M&L PCC (1:4:8) type D2 as in foundation filling and mass concrete complete all as specified and directed.

S&F in repair bib tap 15 mm dia fancy type CP (ISI Marked) with crutch or butter fly handle screwd for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair stop valve 15 mm dia Fancy type CP (ISI Marked) screwed down high pressure with crutch or butter fly handle screwd for iron pipe or union and fixed. Chromium plated fancy type complete all as specified and directed.

S & F in repair Pillar tap 15 mm dia Fancy type CP with crutch or butter fly handle screwd for iron pipe or union and fixed. Chromium plated fancy type with long shank and cup (concealed type) complete all as specified and directed.

S&F in repair PVC valve less syphonic action type flushing cistern 10ltr capacity low level, white/coloured with inlet ball valve flaot and handle including bracket (incl.taking down old cistern ) and fixing of PVC flush pipe 32 mm dia and PVC connection pipes complete all as specified and directed.

S&F in repair health faucet with 1 mtr tube & hook (braded Tube) complete all as specified and directed.

Supply only flush pipe of polythene of low or high density 32 mm PVC for low level flushing cistern complete all as specified and directed.

Taking up or down steel tubing 15mm dia bore and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down steel tubing 20mmdia bore and connections including cleaning for refixing or removal to store complete all as specified and directed.

Supply & fix for GI tubing 15 mm bore medium grade with all fittings and fixed to wall/ceiling or laid in floors complete all as specified and directed.

Supply & fix for GI tubing 20 mm bore medium grade with all fittings and fixed to wall/ceiling or laid in floors complete all as specified and directed.

S & F in repair CP brass wash hand basin mixure 15mm dia with swinging spout mark Hot and Cold complete all as specified and directed.

S & F in repair CP brass wall mixure 15mm dia i with mark Hot and Cold complete all as specified and directed.

Dismantling water tank of capacity 500 ltr and removing to store of any description complete all as specified and directed.

Dismantling water tank of capacity exc 500 ltr & not exc 1000 ltrs and removing to store of any description complete all as specified and directed.

S & F for Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500ltr hoisted and fixed in position complete incl 20mm PTMT ball valve complete all as specified and directed.

S & F for Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000ltr hoisted and fixed in position complete incl 20mm PTMT ball valve complete all as specified and directed.

S&F in rep 20mm dia gun metal,globe or gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

M & L for glazed ceramic coloured tiles of size 300 x 450mm x 7 to 8 mm thick on verticle surfaces,as in patch , set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles including 10 mm rendering as in backing coat in CM (1:6) complete all as specified and directed.

S & F for non skid coloured ceramic tiles 400x400x7-8mm thick in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding / terrazo dado etc (but not backing), removing servicable tiles to store and rubbish off the premises complete all as specified and directed.

Panwar Electrical

ANKIT KUMAR

A ONE BUILDERS AND ENGINEERS