Special Repair Primary School (Degree Collage )Building at Nirmand

Earthwork in excavation for foundation of structures upto all depth as per drawing and technical specification clauses 305.1 including setting out, construction of shoring and bracing , removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material as per direction of The Engineer-In-Charge complete.

Providing and Laying plain cement concrete 1:5:10 (one cement : five sand : ten graded stone aggregate 40 mm (forty millimetre) nominal size) in open foundations complete as per drawing and technical specification clauses 802, 803, 1202 and 1203 including curing and carriage of materials in all leads and lifts as per direction of The Engineer-In-Charge complete.

Stone masonry work in cement mortar in sub-structure complete as per drawing and technical specifications Clause 702, 704, 1202 & 1203. Randaom rubble masnory in cement mortar 1:6 (one cement : six sand) including curing and carriage of materials in all leads and lifts as per direction of The Engineer-In- Charge complete

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in foundation and plinth in: Cement mortar 1:6 (one cement : six coarse sand) including curing and carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor all level. Cement mortar 1:4 (1 cement :4 coarse sand) including curing and carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete

Providing and fixing angle iron frames for doors,windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing Tiron including curing and carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete

Providing and fixing panelled or nelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction including curing and carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete

Centering and shuttering including strutting, propping etc. and removal of form including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete for Beams, cantilever, girders and lintels sides and soffits of beams, beam hunching, cantilevers, bressumers and lintels in any depth in all height from floor.

Providing and laying mechanically mixed and vibrated cement concrete 1:2:4 (1 cement : 2 sand : 4graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work but including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete in:-

Providing mild steel / tor. steel reinforcement cement for RCC. Work including bending binding and placing in position complete up to floor all level inclusive of the cost of binding wire and including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete.

Steel work welded in built up section, trusses and framed work, including Cutting, hoisting fixing in position and applying a priming coat of red lead paint including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. In trusses and trussed purloins in building.

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. Sheet 0.63 mm thick with zinc coating not less than including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete

15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand) including curing and carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete

Providing and applying white cement based putty of average thickness 1 mm (one millimetre), of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete.

Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately).6 mm thick Cement fiber board as per IS including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick including curing and carriage of materials in all leads and lifts as per direction of The Engineer-In-Charge complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer including curing and carriage of materials in all leads and lifts as per direction of The Engineer-In-Charge complete.

Applying priming coat:With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including curing and carriage of materials in all leads and lifts as per direction of The Engineer-In-Charge complete

Painting with oil type wood preservative of approved brand and manufacture: Old work (one or more coats) including curing and carriage of materials in all leads and lifts as per direction of The Engineer-In-Charge complete

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr /10 sqm (at the rate of zero point nine zero litre per ten square metre) over an under coat of primer applied @ 0.75 ltr/10 sqm (at the rate of zero point seven five litre per ten square metre) of approved brand and manufacture including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete.

Stone soling dry hand packed under floors including curing and carriage of materials in all leads and lifts as per direction of The Engineer-In- Charge complete

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required diameter & length (hold fast lugs or dash fastener shall be paid for separately).2nd (second) Class Deodar wood including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete.

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc.Kiln seasoned and chemically treated hollock wood including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge. including curing and carriage of materials in all leads and lifts as per direction of The Engineer-In-Charge complete.

Providing and fixing hard drawn steel wire fabric of size75 x25 mm mesh or other uitable size wire mesh to be fixed & firmly anchored to the concrete surface bymeans of “L” shaped mild steel shear key welded withexisting reinforcement including the cost of materials,labour, tool & plants as approved by Engineer-in-charge including curing and carriage of materials in all leads and lifts as per direction of The Engineer-In-Charge complete..

Finishing walls with water proofing cement paint ofrequired shade : 13.44.1 New work (Two or more coats applied @3.84 kg/10 sqm) including curing and carriage of materials in all leads and lifts as per direction of The Engineer-In-Charge complete..