Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.1 LAccepted-AOC | L1 | Accepted-AOC ACCEPT | |
| 2 | L2₹2.1 L+₹4,273.97 (2.08%)Rejected-Finance | L2 | Rejected-Finance REJECT L2 |
| Sl No | Description | Qty | Unit | BIJUKUMAR.S L1 | Jacob kunjukunju L2 |
|---|---|---|---|---|---|
| 1.00MAINTENANCE | |||||
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 251.12 | kg | 185 ₹46,457.2 Lowest | 195 ₹48,968.4 |
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 293.8 | kg | 194 ₹56,996.23 Lowest | 200 ₹58,759 |
| 1.00 | 2.7.3:Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Hard rock (blasting prohibited) | 1.89 | cum | 1,485 ₹2,806.65 Lowest | 1,485 ₹2,806.65 Lowest |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.24 | cum | 9,235 ₹2,262.58 Lowest | 9,235 ₹2,262.58 Lowest |
| 1.00 | 50.13.1:9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete | 22.87 | sqm | 343 ₹7,844.41 Lowest | 343 ₹7,844.41 Lowest |
| 1.01 | OD458740/2025-2026:Providing and fixing Galvanized Iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm ( + 0.05 %) total coated thickness with zinc coating120grams per sqm as per IS 277, in 240mpa steel grade,5-7microns epoxy primer on both sidof the sheet and polyester top coat 15-18 microns .Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 73.14 | sqm | 621 ₹45,419.94 Lowest | 621 ₹45,419.94 Lowest |
| 1.01 | 50.6.3.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete | 0.4 | cum | 8,645 ₹3,458 Lowest | 8,645 ₹3,458 Lowest |
| 1.01 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 5 | sqm | 336 ₹1,680 Lowest | 336 ₹1,680 Lowest |
| 1.01 | OD458942/2025-2026:Providing and laying 60 mm thick factory made cement concrete interlocking paver block
made by block making machine with strong vibratory compaction, of approved size,
design & shape, laid in required colour and pattern ,etc. all complete as per the direction
ofEngineer-in-charge.
Details of cost of 10 sqm | 32.4 | 1 sqm | 993 ₹32,173.2 Lowest | 993 ₹32,173.2 Lowest |
Tender Value
₹2.1 L
EMD Value
₹5,249
Closing Date
5 Mar 2026, 5:00 pmClosed
Assistant Engineer
Kulakkada GP
GLPS POOVATTOOR WEST MAVADY WARD15 MAINTENANCE_PR NO 306_26
2026_LSGD_840249_10
4/AE/LSGD/KDA/2025-26
Open Tender
Civil Works - Buildings
Item Rate
180 days
Kulakkada GP
Please refer Tender documents.
8 documents required · 8 mandatory
₹555
Yes
₹5,249
Yes
15 May 2026
25 Feb 2026
7 Mar 2026
25 Feb 2026
5 Mar 2026
25 Feb 2026
MAINTENANCE
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
2.7.3:Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Hard rock (blasting prohibited)
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
50.13.1:9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete
OD458740/2025-2026:Providing and fixing Galvanized Iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm ( + 0.05 %) total coated thickness with zinc coating120grams per sqm as per IS 277, in 240mpa steel grade,5-7microns epoxy primer on both sidof the sheet and polyester top coat 15-18 microns .Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
50.6.3.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
OD458942/2025-2026:Providing and laying 60 mm thick factory made cement concrete interlocking paver block made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern ,etc. all complete as per the direction ofEngineer-in-charge. Details of cost of 10 sqm
OD458947/2025-2026:Supplying and Fixing 150 mm dia PVC rain water gutter semi circular section including fitting with 32mX5m MS flat supporters at 1m interval etc. complete.
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1416766.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.47 MB
preli.pdf
Tender Documents • 0.26 MB
epay.pdf
Tender Documents • 0.24 MB
affi.pdf
Tender Documents • 0.24 MB
ipac.pdf
Tender Documents • 0.24 MB
BOQ_1416766.xls
BOQ • 0.30 MB
form.pdf
Tender Documents • 0.25 MB
viewsbd.pdf
Tender Documents • 2.36 MB
time.pdf
PDF • 0.38 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .