Composite tender for various works viz laying and fitting of various dia pipes, revamping of filtration plant, renovation of quarter and Electric and Mechanical works and other applied allied works for W.S.Scheme Zaingeer under langushing programme

Amount

Earth work in excavation by manual means over areas (exceeding 30cm and up[to 1.5mtr in depth, 1.5mtr in width as well as 10 sqm on plan) including disposal of excavated earth upto 1mtr from cutting edge disposal earth to be levelled and neatly dressed . All kinds of soil

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc not exceeding 1.5mtr in width and for shafts wells, cesspits and the like not exceeding 10 Sqm on plan, depth upto 1.5mtr. All kinds of soil

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc (not exceeding 1.5m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50meters: All kinds of soil

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30cm in depth, 1.5m in width as well as 10m² on plan) including disposal of excavted earth lead upto 50meters and lift upto 1.5m, as sirected by Engineer incharge. All kinds of soil

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30cm in depth, 1.5m in width as well as 10m² on plan) including disposal of excavted earth lead upto 50meters and lift upto 1.5m, as sirected by Engineer incharge. Ordinary Rock

Earth work in surface excavation not exceeding 30cm in depth but exceeding 1.5m in width as well as 10Sqm on plan including disposal of excavted earth, lead upto 50meter and lift upto 1.5m, as directed by Engineer incharge. All kinds of soil.

Providing and laying S & S centrifugally Cast (spun) Ductile Iron pipes conforming to IS : 8329. 200mm dia Ductile Iron Class K - 7 pipes

Providing and laying S & S centrifugally Cast (spun) Ductile Iron pipes conforming to IS : 8329. 150mm dia Ductile Iron Class K - 7 pipes

Providing and laying S & S centrifugally Cast (spun) Ductile Iron pipes conforming to IS : 8329. 100mm dia Ductile Iron Class K - 7 pipes

Providing and fixing of G.I pipes complete with G.I fittings excluding trenching and refilling etc (external work). 100mm dia G.I pipe, nominal bore

Providing and fixing of G.I pipes complete with G.I fittings excluding trenching and refilling etc (external work). 80mm dia G.I pipe, nominal bore

Providing and fixing of G.I pipes complete with G.I fittings excluding trenching and refilling etc (external work). 65mm dia G.I pipe, nominal bore

Providing and fixing of G.I pipes complete with G.I fittings excluding trenching and refilling etc (external work). 50mm dia G.I pipe, nominal bore

Providing and fixing of G.I pipes complete with G.I fittings excluding trenching and refilling etc (external work). 40mm dia G.I pipe, nominal bore

Providing and fixing of G.I pipes complete with G.I fittings excluding trenching and refilling etc (external work). 25mm dia G.I pipe, nominal bore

Providing and fixing of G.I pipes complete with G.I fittings excluding trenching and refilling etc (external work). 20mm dia G.I pipe, nominal bore

Providing and fixing of 50mm dia air valve of approved make incld. all sorts of accessories complete job

Providing and fixing of 65mm dia air valve of approved make incld. all sorts of accessories complete job

Providing, fixing and successful testing of following double flanged non rising spindle with hand wheel C.I sluice valve of kirlosker make (heavy duty) of P.N.I 1.6 rating including tail pieces (male and female) R.I cloth nuts and bolts, including all carriages leads and lifts including cost of lead, spun yarn, excavation/re-filling complete job as per instruction of Engineer incharge. 300mm dia

Providing, fixing and successful testing of following double flanged non rising spindle with hand wheel C.I sluice valve of kirlosker make (heavy duty) of P.N.I 1.6 rating including tail pieces (male and female) R.I cloth nuts and bolts, including all carriages leads and lifts including cost of lead, spun yarn, excavation/re-filling complete job as per instruction of Engineer incharge. 200mm dia

Providing, fixing and successful testing of following double flanged non rising spindle with hand wheel C.I sluice valve of kirlosker make (heavy duty) of P.N.I 1.6 rating including tail pieces (male and female) R.I cloth nuts and bolts, including all carriages leads and lifts including cost of lead, spun yarn, excavation/re-filling complete job as per instruction of Engineer incharge. 150mm dia

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20cm in trenches, plinth, sides of foundation etc complete

Extra for every additional lift of 1.5m or part thereof in excavation/banking excavated or stacked material: All kinds of soil

Extra for every additional lift of 1.5m or part thereof in excavation/banking excavated or stacked material: Ordinary or hard rock

Providing and laying incld. jointing(welded), testing, commissioning and fabricating M.S pipes made out of 5mm thick M.S sheet incld. cost of flanges, welding of flanges with pipe ends at required spots, nuts, bolts, rubber insertions (12mm thick flanges) incld. making welded bends, Y-junctions incld. connecting the X same with new S.R and existing pipe network like supply mains/wash out system/over flow of S.R with supply main/existing rising main with new S.R incld. all type of carriages like M.T/H.L of materials from source upto actual site of work which includes transportation of electric/gas welding plant upto actual site of work complete job for 300mm dia M.S pipes

Providing and laying stone soling hand packed on level incld. cost of stones

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering. All work upto plinth level. 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone agg. 20mm nominal size) Crushed incld. carriage

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone) aggregate 20mm nominal size Crushed. Incld. carriage

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement. All work upto plinth level. 1 : 2 : 4 (1 cement ; 2 coarse sand : 4 graded stone agg. 20mm nominal size). incld. carriage

Centering and shuttering including straightening propping etc, and removal of form work for: Walls (any thickness) including attached pilasters, buttresses, plinth and string courses

Centering and shuttering including straightening propping etc, and removal of form work for: Foundations, footing, bases of columns etc for mass concrete

Providing and laying earth filled E.C bags for construction of ring bund on wullar lake site during exceution for diversion of flow of water, the job includes earth work in excavation, filling of E.C bags with earth/sand placing of earth filled bags in portion under water head load of E.C bags incld. all leads and lifts complete job.

Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete (T.M.T bars) incld. all carriages

12mm cement plaster of mix: 1 : 4 (1 cement : 4 fine sand)

20mm cement plaster of mix: 1 : 4 (1 cement : 4 coarse sand)

Brick work with coomon burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in: Cement mortar 1 : 4 (1 cement : 4 coarse sand) incld. all carriages

Extra for brick work in super structure above plinth level upto floor V level (by manual means)

Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc as required. In gratings, frames, guard bars, ladders, railings, brackets, gates and similar works.

Dismentalling of complete reduction gear unit of desludge bridge for repairs by way of providing and manufacturing of complete reduction gear with hub. The job, includes costing of brass material grinding/finishing of vireme in order to make the new teeth, replacement of damaged oil seal by way of new one, replecement of ball bearing pouring of required specific gravity gear oil in order to run the reduction gear in smooth order, refixing of same at site of work incld. all sorts of carriage to & fro site upto workshop and back to site of work after successful repairs incld. testing/commissioning (for 15 days test) incld. painting complete job.

Dismmentalling/dismembring of back wash motors/ reduction gear motors of rotatory bridge/alum motors/bleaching motors by way of rewiding of core made out of copper metal fibre, superior type of required thickness and gauge . The job includes replacement of bearings, water seal, nuts, bolts, rubber washers and painting of instruments and also includes all type of carriages from site of work upto workshop then back to site of work after successful repairs, fixing/filling at site, testing 4mm/6mm of standard quality (Anchor or Havels) (testing for 15 days). The job includes repair of testing and commissiong of 3 HP to 15 HP Motors

Over hauling of voltage stablizer installed at filtration plant. The job includes pouring/filling of transformer oil of required specific gravity, replacement of driven rotars (automatic) replacment of voltage, meters, Amps, Indicators, thimbles etc complete job making the unit complete functional for bearing of required load. the job also includes lab charges from site of work upto workshop then back to site of work after successful repairs incld. installation/ testing /commissioning complete job

Electrification by providing and fixing of electric points (heating and lighting) including cost wire 1mm,1.5mm,2.5mm as per site requirement, cost of on off swithches, 3 pin/2 pin sockets, conduits, modules, ceiling roses, holders, fan-points, indicators, bulbs energy saver, 7/18 main service line, MCB's- Main switch board, ceiling chases in brick walls for underground fitting and making good to the wall heating point 16 Amps with on-off switch. the job includes complete wiring as required . All the items should be of standard quality (Havels/Anchor)

Fixing charges of 50mm dia M.S mechanical joints in 450mm dia D.I pipes incld., cost for cutting of D.I pipes at required spots, lead jointing incld. cost of lead, spun yarn, gaskets etc as per site requirement incld. all type of carriages of materials upto actual site of work, testing the joints complete job. 400mm dia

Fixing charges of 400mm dia M.S mechanical joints in 400mm dia D.I pipes incld., cost for cutting of D.I pipes at required spots, lead jointing incld. cost of lead, spun yarn, gaskets etc as per site requirement incld. all type of carriages of materials upto actual site of work, testing the joints complete job. 450mm dia

cutting of M/s flanges in 550mm dia M.S Trunk line on outer portion by way of welding, removal of damged flanges, nuts, bolts incld. Welding of M.S strips 6mm thick 250mm/200mm/175mm wide out-side the 550mm dia M.S pipes at the cutted flanged joint incld. providing of temporary support to the pipe prior to welding incld. providing and fixing of blind flanges of required size 450mm dia M.S flanges 10mm thick with L-iron support at Y-junction incld., testing the joint and all type of carriages of welding set, genset and allied necessary items required at site complete job.

Providing/laying factory made cement concrete tiles of approved make in all colours & shades in out doors, floors, foot-paths, court-yards etc laid on 20mm thick base cement mortar 1 : 4 mix in all shapes and patterns incld. gronting the joints with white cement mixing with matching pigments or cement slurry incld. all type of carriages from source upto actual site of work.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixed with dash fastener of required dia and size including necessary filling up of gaps at junctions i,e at top, bottom and sides with required EPDM rubber/neoprene gasket felt etc. aluminium sections shall be smooth, rust free, straight. mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/panelling, C.P brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge (glazing, panelling and dash fasteners to be paid for separately). For fixed portion Anodized aluminium (Anodized transparent or dyed to required shade according to IS : 1868, minimum anodic coating of grade AC 15)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge (Cost of aluminium snap beading shall be paid in basic item). With float glass panes of 5.0mm thickness (weight not less than 1.50kg/sqm)

Providing and fixing hand rail of approved size by welding etc to steel ladder railing, balcony railing and stair case railing and similar work including applying a priming coat of approved steel primer. M.S tube (medium) 40mm nominal bore

Steel work in built up tubular (round, square or rectangular hollow tubes etc) trusses etc, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc complete. Electric resistance or induction butt welded tubes

Providing corrugated G.S sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50mm thick

Providing ridges or hips of width 60cm over all width plain G.S sheets fixed with polymer coated J or L hooks, bolts and nuts 8mm dia G.I limpet and bitumen washers complete. 0.50mm thick

Providing of 19mm thick ply wood sheets flooring incld. of cost wooden frame work of Ist class kail wood incld. cost of nails, screws, nuts, bolts as per site requirement incld. all type of carriages from source upto actual site of work complete job

Providing and fixing of 6mm thick plywood panelling inside of room of standard quality and thickness incld. cost for nuts, screws and required frame work of Ist class kail wood incld. all type of carriages from source to actual site of work complete job.

Providing and fixing 1mm thick M.S Sheet door with frame of 40 x 40 x 6mm angle iron and 3mm M.S, gusset plates at the junctions and corners, all necessary fittings complete, including applying coat of approved steel primer. Using M.s angles 40 x 40 x 6mm for diagonal braces.

Providing and laying ceramic glazed floor tiles 300x300mm (thickness to be specified by the manufacturers) of Ist quality conforming to IS : 15622 of approved make, laid on 20mm thick bed of cement mortar 1 : 4 (1 cement : 4 coarse sand ) including pointing the joints with white cement and matching pigment etc complete. In all colours, shades, except white, ivory, fume red brown

Applying priming coat: with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works.

Applying priming coat: with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give and even shade.Two or more coats on new work

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.

Wall painting with acrylic emulsion paint of approved brand and manufacture to give and even shade. Two or more coats on new work

Floor painting with floor enamel paint of approved brand and manufacture of required colour to give and even shade on new work. Two or more coats.

Finishing walls with water proofing cement paint of approved brand and manufactured of required shade to give an even shade new work(two or more coats) applied @3.84kg/10sqm

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2mm thick

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50meters lead: Of area of 3 sqm and below

Dismantling roofing including ridges, hips valleys and gutters etc and stacking the material within 50meters lead of: G.S sheet

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50meters lead.

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S, pressed butt hinges bright finished of required size with necessary screws. First class kail wood.

Providing and fixing wire gauze shutters using galvanized M.S wire gauze of average width for aperture 1.4mm in both directions with wire of dia 0.63mm for doors, windows and clerestory windows with ISI marked M.S pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer incharge. First class kail wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for seperately, all complete as per direction of Engineer-in-charge 9Note:- Butt hinges and necessary screws shall be paid seperately). First class kail wood.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled and glazed shutters 25mm to 40mm thick. First Class kail wood

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. Complete

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc complete

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50meters lead as per direction of Engineer incharge. In cement mortar

Demolishing cement concrete manually/by mechanical means including disposal of material within 50meters lead as per direction of Engineer incharge. 1 : 3 : 6 or richer mix (I,e equivalent design mix)

Extra for scrapping, cleaning and straightening reinforcement from R.C.C or R.B work

Removing mortar from bricks and cleaning bricks including stacking within a lead of 50mtr. (stacks of cleaned bricks shall be measured): From brick work in cement mortar

Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with: 5.0mm thick glass panes

Providing and fixing water closet squotting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, 10 liter low level white P.V.C flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) confirming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the wall and floors wherever required. White vitreous china pattern W.C pan of size 580x440mm with integral type foot rests.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing. Rectangular shape 453x357mm

Providing and fixing wash basin with C.I brackets, 15mm C.P brass pillar taps, 32mm C.P brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China Wash basin size 63x450mm with a pair of 15mm C.P, brass pillar taps

Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete: Semi rigid pipe 32mm dia

Providing and fixing of 35 litre geaser of standard quality ISI Mark with all fitting complete job

Cutting chases in brick masonry walls for following dimater sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1 : 3 : 6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 1.5mm nominal size) including necessary plaster and pointing in cement mortar 1 : 4 (1 cement : 4 coarse sand). 50mm dia

Providing and fixing G.I pipes complete with G.I fittings excluding trenching and refilling etc (external work). 20mm dia nominal bore

Providing and fixing G.I pipes complete with G.I fittings excluding trenching and refilling etc (external work). 15mm dia nominal bore

Providing and fixing of 15mm dia bib taps of standard quality stainless steel incld. all fitting charges complete job

Providing and fixing of PTMT Towel rail

Providing and placing on terrace (at all floor levels) on polythylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured) 5.0mm thick instead of 4mm thick

Extra for providing frosted glass panes 4mm thick instead of ordinary float glass panes 4mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete.100x85x5.5mm (heavy type)

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete.100x10mm

Providing and fixing bright finished brass handles with screws etc. complete.100mm

Providing and fixing bright finished brass tower bolts (barellel type) with necessary screws etc. complete.200x10mm

Providing and fixing of link lock of standard quality Ist amrk complete job

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fsteners shall be paid for separately): First class kail wood.

Providing, hoisting and fixing trusses/purlins/ rafters/ posts/post-plates or like components including cost of screws etc. complete Second class kail wood

Providing wood work in frames of false ceiling, partitions etc sawn and fixed in position: Budloo/Fir wood