Upgradation of Laboratory in Chemistry and Life science Department (Phase-II) (Providing False ceiling, Furniture, Electric work etc.) (State Govt. New Construction Grant 2021-22) (RE-INVITE)

NAME OF WORK :- UPGRADATION OF LABORATORY IN CHEMISTRY AND LIFE SCIENCE DEPARTMENT

(PHASE-II) (PROVIDING FALSE CEILLING ,FURNITURE, ELECTRIC WORK) (STATE GOVT. NEW

CONSTRUCTION GRANT 2021-22) (RE-INVITE)

Number UNIT Rate AMOUNT

(upto 200 ITEM DESCRIPTION (upto 50 ( Upto 2 ( Upto

character characters) Decimals ) Decimals )

Providing and fixing eco-friendly light weight calcium silicate

false ceiling tiles having Tegular edge & 15 mm Thick

Densified edges on the Tile Periphery for Extra Strength The

Light weight calcium silicate ceiling tiles shall have , light

reflection 85% non-combustible as per B.S. 476 part IV, 100%

humidity resistance and also having thermal

conductivity0.043° w/m KC.for the best thermal Insulation .

The Light weight calcium Silicate tile shall be of approved

texture Fine fissured/ Spintone/Cosmos having NRC value of

0.5 & Globe having NRC value of 0.75 NRC or equivalent of

size 595 X 595 mm to be laid on true horizontal level

suspended inter locking metal grid of hot dipped galvanized

steel sections (galvanizing @120 grams per sqm including

both side) consisting of main ‘T’ runner suitably spaced at

joints to get required length and size of 24X38mm made

from 0.30 mm thick (minimum) sheet, 1200mm centre to

centre, and cross ‘T’ of size 24X28mm made out of 0.33mm

(Minimum) sheet spaced 1200mm along spaced between

main ‘T’ at 600mm centre to centre to form agrid of

1200X600mm and secondary cross ’T’ of length 600mm and

size 24x28mm made of 0.30 mm thick (Minimum) sheet to

be interlocked at middle of the 1200X600mm panel to form

grid of size 600X600mm resting on periphery walls/partitions

on a perimeter wall angle pre-coated steel of size

(24X24X3000mm made of 0.40mm thick (minimum) sheet

with the help of rawl plugs at 450mm centre to centre with

25mm long dry wall screws @ 230mm interval and laying

15mm thick Densified edges light weight calcium silicate

LAB TABLE - Providing 1800mm L x 600mm W x 830mm H

main table top made from 18mm Telephone black granite

with rounded edges, supported by stainless steel tubular

pipes(s.s. 304 grade). It includes practical under-storage with

four drawers(below table width 450mm, depth 600mm) and

2 four cabinets (shutters not exceeding 400mm), all fitted with 35.00 Nos 35129.82

high-quality HETTICH stainless steel hardware like drawer

chenal , hinges, and locks. The design also incorporates PVC

buffers and dedicated foot space, with side storage

dimensions customizable to fit specific as per layout

requirements.(MAKE-shreenathji, geeken,WOOD360 LLP)

STUDIO KEEN ARCHITECT, MEHSANA

Number UNIT Rate AMOUNT

(upto 200 ITEM DESCRIPTION (upto 50 ( Upto 2 ( Upto

character characters) Decimals ) Decimals )

LAB TABLE CENTER SHELF UNIT - Providing shelf unit

measuringlength 1800mm , 460mm in height and 220mm in

width. It should features two tiers of shelving for organized

storage. Constructed entirely from stainless steel (304

3 grade), including its supporting hollow structural pipes, this 18.00 Nos 14278.57

unit shall also thoughtfully incorporates dedicated space on

top for a switchboard and cable management, ensuring a

tidy and efficient workspace.(MAKE-shreenathji,

geeken,WOOD360 LLP)

S.S STOOL- providing s.s (304) stool Sqare Seat size 500mm

dia, 500mm ht, supported by durable stainless steel legs and

equipped with buffers for stability.(MAKE-shreenathji,

geeken,WOOD360 LLP)

RACK - Supplying and fixing OPEN STORWEL (916W X 540D

X2100H) Specification:1)shelf:0.7 mm thik CRCA.2)Sides

0.8mmth. CRCA.3))Load capacity for each full shelf is

maximum 40 kg.5)4 num. Of adjustable full shelf6)Epoxy

powder coated from passing through 7 tank process to the

thikness of 50 microns as per specifications, drawings and as

directed by engineer-in charge. Approved make: Harman

Miller /Godrej/Haworth Knoll.

2 SEATER BENCH- providing bench dual desk, powder coated

pipe frame ,PLPB EDGE bended top, seat and back ,top size

6 should be 1100x400x 18mm thick of geeken make. 175.00 16622.07

Measuring approximately 1200 mm in length. (MAKE-

shreenathji, geeken,WOOD360 LLP)

VISITOR CHAIR:- providing and placing modular armless non

revolving chairChair frame with backrest Frame: Steel,

Epoxy/polyester powder coating Back: Reinforced

polypropylene plastic Seat cover: Polypropylene plastic Seat:

Coated fabric: 75% polyester, 25% cotton, 100%

7 polyurethane Seat frame: Layer-glued wood veneer Seat 24.00 NOS 3626.30

foam: Polyurethane foam 35 kg/cu.m. size - Width: 45 cm

Seat width: 44 cm (17 3/8 ") Seat depth: 44 cm (17 3/8 ")

Seat height: 46 cm (18 1/8 ") Max. load: 110 kg (243 lb)

(MAKE-shreenathji, geeken,WOOD360 LLP)

STUDIO KEEN ARCHITECT, MEHSANA

Number UNIT Rate AMOUNT

(upto 200 ITEM DESCRIPTION (upto 50 ( Upto 2 ( Upto

character characters) Decimals ) Decimals )

MID BACK REVOLVING CHAIR:- Manufacturing and Supply of

MEDIUM Back Revolving ChairWidth (cm) 69.5 Depth (cm)

66.5,Height (cm) 107.5,Weight (Kg) 13 1. Seat And Back :

12MM + 6 MM Double Hot Press Ply Use In Back and

Waterfall Design 16 MM Hot Press Ply Use In Seat for better

thigh Support.Lumbar support in the backrest for improved

posture 2. U-Foam : 32 D Feather Foam Use in Back

Mould : 45D PU Mould Cushion Use in Seat Synchrony

8 Mechanism with single position locking system. 4. Arm Rest : 12.00 Nos 12692.06

Chrome Finish arms with PU Pad 5. Mechanism : Centre tilt

synchro mechanism with 100 mm gas lift 6. Base :Powder

Coated five pronged base 7. Gas Lift : 100 MM Class

ANSI/BIFMA Tested (5 Year Warranty) 8. Caster : Twin wheel

castors are injection molded in nylon and diameter of Castor

50 mm.(8 Year Warranty )as per selection by the architect &

can be customized as per requirements of architect. (MAKE-

WOOD360 LLP, shreenathaji )

3 SEATER SOFA :- Manufacturing and Supply The three-

seater sofa, measuring 2050 length ,825mm in total

depthincluding back , seat - 600mm width, 675mm depth

seat height from the floor of 450mm, will be constructed

using M.R grade plywood or teak wood. The seat will feature

layers of 100mm thick, 32 Density foam, 25mm HR foam,

and 25mm 40 Density foam, while the backrest will consist

of 50mm thick, 32 Density foam, and 25mm Super Soft foam.

Zinc Zac Springs with belts will be utilized for the seat, side

9 support 150mm width made with same as back , and a White 1.00 Nos 51031.16

Polyester Recron Fiber Sheet will be spread over the foam

before fabric lining to hold the fabric tightly in position. The

chosen lining fabric, 700/- per meter, will cover the sofa,

while the back will be stapled with white Madarpat fabric.

sofa leg and exposed farming made of solid indian teak

wood , in requred shape, or metal leg.The foam solution

used will be of high quality, customizable as per the

architect's requirements,(MAKE-WOOD360 LLP,

STUDIO KEEN ARCHITECT, MEHSANA

Number UNIT Rate AMOUNT

(upto 200 ITEM DESCRIPTION (upto 50 ( Upto 2 ( Upto

character characters) Decimals ) Decimals )

SOFA CHAIR :- Manufacturing and Supply The three-seater

sofa, measuring 850mm length ,825mm in total

depthincluding back , seat - 600mm width, 675mm depth

seat height from the floor of 450mm, will be constructed

using M.R grade plywood or teak wood. The seat will feature

layers of 100mm thick, 32 Density foam, 25mm HR foam,

and 25mm 40 Density foam, while the backrest will consist

of 50mm thick, 32 Density foam, and 25mm Super Soft foam.

Zinc Zac Springs with belts will be utilized for the seat, side

support 150mm width made with same as back , and a White

10 Polyester Recron Fiber Sheet will be spread over the foam 2.00 Nos 21531.18

before fabric lining to hold the fabric tightly in position. The

chosen lining fabric, 700/- per meter, will cover the sofa,

while the back will be stapled with white Madarpat fabric.

sofa leg and exposed farming made of solid indian teak

wood , in requred shape, or metal leg The foam solution

used will be of high quality, customizable as per the

architect's requirements,(MAKE-WOOD360 LLP, shreenathji)

ROLLER BLIND : Providing and fixing black-out roller blinds of

"Aerolux" or equivalent make of any color and size for

windows, with super-soft mechanism using clutch and

springs housed in aluminum channel fixed to the masonry/

RCC surfaces by use of brackets. The fabric to be of 100%

11 polyester yarn, cut of site-specific size cut using ultra-sonic 67.68 Sqm 2555.30

machines to avoid threads coming out from its edges. The

rubberized coating over the fabric to enhance blacking out of

the space. complete at all levels and heights. make- d decor/

FACULTY TABLE- :- providing high-quality work table

features a durable 18mm "Telephone Black" Granite stone

tabletop with molded edges, measuring 1250mm long by

600mm deep and standing at a height of 800mm. The

worktop is supported by a robust understructure, which can

be either powder-coated tubular metal legs or solid

fabricated and color-coated metal plates. For convenient

storage, the table includes a 600mm x 600mm metal storage

unit underneath, which is also powder-coated to match the

12 understructure. This storage unit is equipped with both 4.00 NOS 29463.72

drawers and a shutter, and uses high-quality stainless steel

hardware, including channels, hinges, handles, and locks,

along with PVC buffers for smooth operation. The design is

fully customizable to meet the specific requirements of the

architect, with all necessary fixings and installation

included.(MAKE-WOOD360 LLP, shreenathji)

STUDIO KEEN ARCHITECT, MEHSANA

Number UNIT Rate AMOUNT

(upto 200 ITEM DESCRIPTION (upto 50 ( Upto 2 ( Upto

character characters) Decimals ) Decimals )

PODIUM - Providing and Supplying Wooden Podium

having size - 700 (L) X 500 (D) X 1505 (H) mm made using

with 18 mm BWP plywood 4.0 mm thickness VINEER with

13 drawer & necessary wooden support framing with PU 4.00 NOS 24930.84

Polishing, fixture and fastening work shall be done as per

drawing & sample approved as directed by the Engineer in

Charge.(MAKE-WOOD360 LLP, shreenathji)

COMPUTER TABLE : providing computer Table - Main Table

Top length as per requirement width 450 mm 800 mm Ht

/Top :- 32mm thick laminated top (make green lam/ century)

with 2mm Thk PVC Lipping .the desk should have keyboard

tray fixed on gliding channels (make hettich) with necessary

holes beneath the desk The desk is also equipped with a wire

manager, cable tray, cpu storage made from 19 mm M.R Ply

( green ply, century ply make) having perforated openble

shutter made from 25mm wooden Patti fixed at 35 mm c/c

each on 35 mm wooden framing with table top and storage

should have necessary cut for wire to pass and provided with

pvc wire cap as per design given by the architect & can be

customized as per requirements of architect. corners space

can be packed with ply panels properly , extra drawers will

be provided on both sides of unit as per design. (MAKE-

FULL HEIGHT STORAGE UNIT :- providing and fixing storage

unit made of 18 mm ply M.R grade (make- century ply, green

ply) , should have cabinets , drawers, trolleys , shelves,

shutters with depth -600 mm depth and up to lintel height

inside part will be provided with ply shelves as per drawing

given by the architect, outside parts will having equal no of

shutters with s.s heavy duty handles( 12"L) and 3 nos of

hinges, trolley castors , and locks, each shelf can be

15 laminated on both side and edges with 0.8mm laminate and 1.80 SQM 11135.96

outer parts of cabinets will laminated with 1mm textured

laminate ( make - green lam, century) selected by the

architect. entire unit shall be made from 18mm MR grade

commercial plywood (make green lam/ century) shutters

should be finished with wooden edging and coated with

Clear acrylic lacquer, the storage should not have any sharp

edges. it can be customized as per architect. (MAKE-

STUDIO KEEN ARCHITECT, MEHSANA

Number UNIT Rate AMOUNT

(upto 200 ITEM DESCRIPTION (upto 50 ( Upto 2 ( Upto

character characters) Decimals ) Decimals )

OVERHEAD STORAGE UNIT :- providing and fixing storage

unit made of 18 mm ply M.R grade (make- century ply, green

ply) , should have shutters with depth -450mm depth

height shall be between ceiling level and lintel level.

Shutters shall be laminated with 1 mm laminate ( make

green lam, century) in side back side of shutter and frames

will be finished with 0.8 mm laminate selected by the

architect, unit will be fitted with necessary s.s hardware LIKE

HANDLES, HINGES , and fixed to the wall by maintaining

proper level . as per , and fixed to the wall by aianing proper

level . as per design given by the architect or can customized

.(MAKE-WOOD360 LLP)

ELECTRICAL WORK

Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire

of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multistrand copper wires, in following

type of pipe to be erected concealed in/ on surface on

wall/ceiling complete with 6A Modular type switch / bell

17 push & accessories and earth continuity of following type, 34.00 PT 421.17

erected on PVC / Metallic box, single mounting base frame

covered with textured/metallic front plate modules erected

on / in wall / ceiling as per pipe erected, with necessary

Lamp holder/ceiling rose / H.D.Connector as directed. (e) in

existing pipe CAT III

Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of

pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth

continuity of following size

(a) with medium class Rigid PVC pipe and accessories (a)

wire 1.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of

pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth

continuity of following size

(a) with medium class Rigid PVC pipe and accessories (b)

wire 2.5 sq. mm

STUDIO KEEN ARCHITECT, MEHSANA

Number UNIT Rate AMOUNT

(upto 200 ITEM DESCRIPTION (upto 50 ( Upto 2 ( Upto

character characters) Decimals ) Decimals )

Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to

be erected in / on wall / ceiling with 2.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour

for earth continuity of following size (e)

in existing pipe (b) 2 wire 2.5 sq. mm

Supplying & Erecting decorative recess mounting indirect

luminair with LED 2'x2' Square panel 36 Watt complete with

21 diffuser and Sheet Steel housing with Electronics Control 34.00 No 2525

gear & lead wire( MAKE - HEVELLS, GELCO, ORIENT) (Market

Pproviding and erecting Approved make Four pole moulded

case circuit breaker having breaking capacity ICU of 25 KA. at

415 V,having normal current rating up to 25 A to 100A. with

22 Fixed thermal & magnetic release suitable to work on A.C. 4.00 No 7282.1

supply 50 c/s. with all internal connections, spreader tinned

copper & complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

Providing and erecting Inverter based approved make split

air-conditioning unit consisting of condensing unit with

variable speed fan motor, inverter type hermetically sealed

rotary compressor with accessories etc. duly connected

separately erected evaporating unit and blower motor with

23 its accessories by means of extra supplied proper insulated 7.00 NO 72871.5

copper tubing, drain PVC pipes suitable for ( cost includes

Eco Friendly green gas charging and 15A plug top & Remote

Control & MS Stand) with necessary core cutting.(MAKE -

Mitsubishi, OG) (1) For 5 Star Rating of current year (B) for

1.5 ton capacity- Premium Cat.

Supplying & installing MS standard type stand mounting for

24 outdoor unit of Split A.C. upto 4 TR capacity erected with 7.00 NO 959.5

necessary hardware materials as directed.

Providing following type of Modular Type Accessories

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front

25 plate , modules erected with necessary connections as per 7.00 NO 559.54

site situation directed by Engineer In charge.

(22) 16/20/25 Amp. Modular Starter for Motor / A.C. Unit

Complete Cat.III

STUDIO KEEN ARCHITECT, MEHSANA

Number UNIT Rate AMOUNT

(upto 200 ITEM DESCRIPTION (upto 50 ( Upto 2 ( Upto

character characters) Decimals ) Decimals )

Supply, Installation, testing and commissioning including

vaccumiazation and Nitrogen testing of following nominal

sizes of soft/hard drawn copper refrigerant piping for AC

system, complete with fittings, with suitable adjustable ring

type hanger supports, jointing/brazing including accessories,

insulated with XPLE Class-0 tubular insulation/with Class-0

closed cell elastomeric nitrile rubber tubular sleeves sections

of specified thickness as given below for Suction and Liquid

lines, all accessories as per specifications etc with necessary

refrigerant joint as required : (C.) 12.7 mm dia (OD) (Soft

drawn) with tube thickness 1.2 mm with 19 mm thick

making the Zari in wall by using cutter for erecting 40/50 mm

dia PVC Pipe with wire mash jali before plastering andmaking

the surface as per orignal (Market Rate)

(A) Supplying and laying UPVC cable trunking system

comprising unplasticised polyvinyl, chloride rigid material

28 with ignition free & flame proof confirming BS .All necessary 30.00 Mtr 438.643

accessories and measuring of following sizes.(2) 100 mm x

Providing and erecting ISI mark Medium class RIGID PVC

PIPES of following size complete to be erected on/in wall or

29 ceiling erected with necessary PVC fittings & Junction boxes 30.00 Mtr 32.6432

fixed with adhesive solution & Clamps with following dia of

pipes, in approved manner as directed (b) 25 mm

Providing & erecting PVC Corrugated Flexible Conduit with

30 required nos. of coupling, PVC bushes,check-nuts etc. 28.00 Mtr 20.402

complete of following sizes. (2) 25 mm

Note : GST Shall be paid Extra on the Submitted Rate

STUDIO KEEN ARCHITECT, MEHSANA