Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.7 LAccepted-Finance 0 GHAIR SALAWAT KHAN RAMPUR RAMPUR RAMPUR RAMPUR UTTAR PRADESH 244901 | RAMPUR | UTTAR PRADESH | 244901 | L1 | Accepted-Finance L1 | |
| 2 | L2₹4.0 L+₹30,031 (8.06%)Accepted-Finance | L2 | Accepted-Finance L2 | |
| 3 | L3₹4.1 L+₹33,853.50 (9.08%)Accepted-Finance | L3 | Accepted-Finance L3 |
| Sl No | Description | Qty | Unit | R S Electricals Repair and CO L2 | munfad electricals L3 | M/s Charley Enterprises L1 |
|---|---|---|---|---|---|---|
| 1.00Carriage of the following material from Store Centre, Rampur to work site including loading & unloading. | ||||||
| 1.01 | Cross Breacing | 2 | Nos | 25 ₹50 Lowest | 120 ₹240 | 50 ₹100 |
| 1.02 | MS Angle | 2 | Nos | 25 ₹50 Lowest | 70 ₹140 | 50 ₹100 |
| 1.03 | MS Angle Iron 65*65*65 mm bracing | 3 | Set | 45 ₹135 Lowest | 110 ₹330 | 50 ₹150 |
| 1.04 | Ms Angle for Gaurding | 150 | Kg. | 15 ₹2,250 Lowest | 30 ₹4,500 | 50 ₹7,500 |
| 1.05 | Stay wire 7/10 Swg for holding cable | 90 | Mtr | 4 ₹360 Lowest | 60 ₹5,400 | 20 ₹1,800 |
| 1.06 | STP 11 Mtr SP-55 | 22 | Nos | 650 ₹14,300 | 330 ₹7,260 Lowest | 700 ₹15,400 |
| 1.07 | PCC Pole 8.5 Mts | 17 | Nos | 580 ₹9,860 | 310 ₹5,270 Lowest | 700 ₹11,900 |
| 1.08 | T-Off Channel | 13 | Nos | 12 ₹156 Lowest | 55 ₹715 | 50 ₹650 |
| 1.09 | 11 KV X-Arm | 3 | Nos | 12 ₹36 Lowest | 25 ₹75 | 50 ₹150 |
Tender Value
₹6.7 L
EMD Value
₹8,000
Closing Date
12 Sept 2024, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SE EDC RAMPUR
office of the SE EDC RAMPUR
28/2024-25/EDCR Releasing new connection/ shifting of lines/increasing capacity etc. under deposit scheme under jurisdiction of EDD-Milak, Rampur.
2024_PVVNL_949306_1
28/202425(EDCR)
Open Tender
Electrical Works
Lump-sum
45 days
office of the SE EDC RAMPUR
Please refer Tender documents.
3 documents required · 3 mandatory
₹1,180
SE EDC RAMPUR
₹8,000
28 Oct 2025
29 Aug 2024
12 Sept 2024
29 Aug 2024
12 Sept 2024
29 Aug 2024
Amount
Carriage of the following material from Store Centre, Rampur to work site including loading & unloading.
Cross Breacing
MS Angle
MS Angle Iron 65*65*65 mm bracing
Ms Angle for Gaurding
Stay wire 7/10 Swg for holding cable
STP 11 Mtr SP-55
PCC Pole 8.5 Mts
T-Off Channel
11 KV X-Arm
11 KV X-Arm V Type
10 KVA Transformer
25 KVA Transformer
63 KVA Transformer 11/0.04 KV Three Phase
Top Channel
Dropper Channel
Cable Jointing Kit I/D & O/D Suitable for 3*70 sqmm 11 K XLPE
ACSR Weasel Conductor
ACSR Rabbit Conductor
LT PVC Cable 4*16 sq mm
LT XLPE Cable 4*25 Sqmm
Cable AL 3*70 Sqmm 11 KV XLPE (Double CKT)
Stay set Complete
Earthing Complete
Transformer Bass Angle (Centerlized item)
GI wire
Polymeric 11 KV Pin Insulator with Pin
Polymeric 11 KV Disc Insulator with fitting
Old and used ST Pole off size(Rusted as Scrap)
Old and used ACSR Weasel Conductor
Old and used ACSR Rabbit Conductor
a) Single support Excavation of foundation Pit in size of 75x45cm having depth of 1/6th of the full length of the support(pole), providing and laying of stone pad (300x300x75 mm) in the Bottom of the pit. Erection of support(pole) complete with fixing of 11 KV V-type cross-Arms and other accessories by providing clamps made of MS flat of size 65x65xc6 mm with Nuts & Bolts, as per RESPO Norms.
11 Mtr long ST Pole
8.5 Mtr long PCC Pole
Grouting of support in CC 1:4:8(cement, sand & 40 mm. brick ballast) Grouting will be done in the block of size 45x45cmx1/6th of full length of the support upto ground level, 30 cm plinth above the ground level with CC 1:3:6 (cement, course sand and stone grit) with muffing. The work includes back filling and proper ramming etc. a) Single support
11 Mtr long ST Pole
8.5 Mtr long PCC Pole
b) Double Support Excavation of foundation Pit in size of 75x45cm having depth of 1/6th of the full length of the support(pole), providing and laying of stone pad (300x300x75 mm) in the Bottom of the pit. Erection of support(pole) complete with fixing of 11 KV V-type cross-Arms and other accessories by providing clamps made of MS flat of size 65x65xc6 mm with Nuts & Bolts, as per RESPO Norms.
11 Mtr long ST Pole
8.5 Mtr long PCC Pole
Grouting of support in CC 1:4:8(cement, sand & 40 mm. brick ballast) Grouting will be done in the block of size 45x45cmx1/6th of full length of the support upto ground level, 30 cm plinth above the ground level with CC 1:3:6 (cement, course sand and stone grit) with muffing. The work includes back filling and proper ramming etc. b) Double support
11 Mtr long ST Pole
8.5 Mtr long PCC Pole
Providing & Grouting of Stay Rods(20x1800)mm including all work of excavation, cement concrete in size of (0.60x0.60x0.30)M in the ratio of 1:4:8(cement, sand, 40mm brick ballast) including back filling of soil and proper ramming etc.
Providing and Fixing, tightening and nozelling of stay wire with stay rod with the pole of required tension by providing stay clamps.
Earthing of support with MS Earth Rod of (20x2500)mm long including excavation of pit and driving MS Rod 3.0 M apart from support and 0.5 M below the ground level and connecting below the earth electrodes with the help of GI wire No. 8SWG and earthing lugs.
fixing of 11 KV Pin Insulator with Pin as per RESPO Norms and as per direction of Supervising Engineer.
fixing of 11 KV Disc Insulator with Fitting as per RESPO Norms and as per direction of Supervising Engineer.
laying ,stringing and binding of ACSR Weasel Conductor as per RESPO Norms and as per direction of Supervising Engineer.
laying ,stringing and binding of ACSR Rabbuit Conductor as per RESPO Norms and as per direction of Supervising Engineer.
Laying ,stringing and binding of LT PVC Cable 4*16 sq mm as per RESPO Norms and as per direction of Supervising Engineer.
Laying ,stringing and binding of LT XLPE Cable 4*25 sq mm as per RESPO Norms and as per direction of Supervising Engineer.
Laying ,stringing and binding of Cable AL 3*70 Sqmm 11 KV XLPE (Double CKT) with the help of jointing kit as per RESPO Norms and as per direction of Supervising Engineer.
Dismentalling of ST Pole of size as per RESPO Norms and as per direction of Supervising Engineer.
Dismentalling of ACSR Weasel Conductor as per RESPO Norms and as per direction of Supervising Engineer.
Dismentalling of ACSR Rabbit Conductor as per RESPO Norms and as per direction of Supervising Engineer.
Installation of 10 KVA Trasformer with connection as per RESPO Norms and as per direction of Supervising Engineer.
Installation of 25 KVA Trasformer with connection as per RESPO Norms and as per direction of Supervising Engineer.
Installation of 63 KVA Trasformer with connection as per RESPO Norms and as per direction of Supervising Engineer.
Fixing of Transformer Base angle as per RESPO Norms and as per direction of Supervising Engineer.
Fixing of GI wire as per RESPO Norms and as per direction of Supervising Engineer.
Fixing of Stay wire 7/10 Swg for holding cable as per RESPO Norms and as per direction of Supervising Engineer.
Fixing of MS Angle for Gaurding as per RESPO Norms and as per direction of Supervising Engineer.
Fixing of Cross Breacing per RESPO Norms and as per direction of Supervising Engineer.
Providing and fixing Clamp with Nut and bolts per RESPO Norms and as per direction of Supervising Engineer
Providing and fixing Stone Pad as per RESPO Norms and as per direction of Supervising Engineer
Providing and fixing F Clamp per RESPO Norms and as per direction of Supervising Engineer
Providing and fixing F Bracket with Nut and bolts per RESPO Norms and as per direction of Supervising Engineer
Providing and fixing Danger Board with fixing clamp per RESPO Norms and as per direction of Supervising Engineer
Providing and fixing Barbed wire per RESPO Norms and as per direction of Supervising Engineer
Providing and fixing E-Bracket as per RESPO Norms and as per direction of Supervising Engineer
Providing and fixing GI Pipe 6 Inch Dia per RESPO Norms and as per direction of Supervising Engineer
Providing and fixing 10 Qtl Sand and 3000 Nos Brick(lumsum) for laying Cable AL 3*70 Sqmm including digging trench per RESPO Norms and as per direction of Supervising Engineer
R S Electricals Repair and CO
munfad electricals
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .