REPAIR/MAINT OF VARIOUS TYPE OF HARD STANDING, PAVER BLOCKS, FENCING, COMPOUND WALL AND DRAINS AT REKHAMARI CAMP AREA, ROCKET, SATA, LT AND MED REGT UNDER GE MISSAMARI

Amount

M&L brick work with sub class 'B' bricks, old size bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar (1:6) including demolition of existing unserviceable brick work masonry, built in cement mortar including all quoins, arches, pillars etc.removing debries of the the site complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) including demolition of existing unserviceable brick work masonry removing debries of the the site complete all as specified and directed.

M&L Bricks, sub class B,laid on edge as in drain, bedded and jointed in cememt mortar 1:6 and pointed in cement mortar 1:3 including including demolition of existing unserviceable Bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons, etc. (each layer) laid bedded and pointed in any mortar, removing debries of the the site complete all as specified and directed.

M&L for PCC (1:4:8) type-D2 with using 40 mm graded crushed stone aggregate as foundation filling and mass concrete etc including necessary formwork as required including demoliation of existing unserviceable PCC removing debries of the the site complete all as specified and as directed.

M&L for PCC (1:3:6) type-C2 with using 40 mm graded crushed stone aggregate as foundation filling and mass concrete etc including necessary formwork as required including demoliation of existing unserviceable PCC removing debries of the the site complete all as specified and as directed.

M&L for providing plain cement concrete type C-1, (1:3:6), (using 20 mm graded stone aggregate), as in copping, and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

M&L 15mm thick plaster of cement mortar (1:4) rendering on fair faces of brick work in two layers (10mm & 5mm) mixed with and including liquid water proofing compound in top layer as per manufacturer's instructions, finishing the surface fair and even without using extra cement complete all as specified and as directed.

M&L 15mm thick plaster of cement mortar (1:4) rendering on fair faces of brick work in two layers (10mm & 5mm) mixed with and including liquid water proofing compound in top layer as per manufacturer's instructions, finishing the surface fair and even without using extra cement including taking down cement plaster on wall & ceiling of any description including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and as directed.

Cleaning of surface drain by taking out brickbats, pebbles, slits, mud, sludge, vegetation grown in and along the drain and removing debries and depositing where directed complete all as directed. Note:- Measurement shall be made from the excavated trench made, filling in debries removed, measuring the measurements and returnin filling in and removing surplus soil as directed is deemed to be inclusive in the Unit rate Quoted

M&L Precast reinforced cement concrete type B-1, (1:2:4), (using 20 mm graded stone aggregate), as in cover slab of manholes, set in cement mortar 1:4 including demoliation of existing unserviceable cover slab complete all as specified and directed. Note: Reinforcements shall be measured and paid seperately under appropiate item

M&L TMT bar 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in natural ground including taking out embedded portion and making good disturbed ground complete all as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu.m, getting out in soft/loose soil and removing debries not exceeding 50 metre and depositing where directed complete all as directed.

S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 including preperation of surfaces and applying a coat of red oxide zinc chrome primer complete all as specified and as directed.

Dismantling fencing wire mesh,any type complete all as directed.

Supply only chain link MS galvanized fencing 4mm dia and size as ordered, complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed

S&F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed

S&F mild steel screw bolts (machine made) with hexagonal head at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal nut, length of bolt exceeding 10cm and not exc 15cm long, dia of neck 11 to 15mm complete all as specified and as directed.

M&L 100mm thick cement concrete (1:2:4) type B-2( using 40mm graded crushed stone aggregate) as in Path/Pavings and finished even and fair without using extra cement including demoliation of existing cement concrete Path/Pavings removing debries of the the site complete all as specified and as directed.

M&L 75mm thick cement concrete (1:4:8) type D-2( using 40mm graded crushed stone aggregate) as in sub bases of floor including demoliation of existing cement concrete sub base removing debries of the the site complete all as specified and as directed.

M&L 75mm thick cement concrete (1:3:6) type C-2( using 40mm graded crushed stone aggregate) as in plinth protection/Pavings laid in alternate bays (not exceeding 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight including demoliation of existing unserviceable plinth protection and removing debries of the the site complete all as specified and as directed.

M&L Pre polished chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick set and jointed and pointed in neat cement slurry in floor with grey cement and pigment over cement screed 20 mm thick in cement mortar 1:6 including dismantling/taking out existing unserviceable tiles and removing debries of the site complete all as specified and as directed.

M&L Heavy duty vitrified tiles 30 cm x 30 cm x 9-10mm thick ( as per ISO 13006 Group B I a) set and jointed and pointed in neat cement slurry in floor with grey cement and pigment over cement screed 15 mm thick in cement mortar 1:6 including dismantling/taking out existing unserviceable tiles and removing debries of the site complete all as specified and as directed.

Supply and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; including demoliation/taking out old unseviceable paver block complete all as specified and as directed.

M&L preparation new iron and steel surfaces of any description, exc 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L preparation old iron and steel surfaces of any description, exc 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

M&L prepartion of newly plastered surfaces of walls and two coats of cement base paint paint over a coat of primer complete all as specified and directed.

M&L prepartion of old plastered surfaces of walls and one coats of cement base paint paint complete all as specified and directed.

M&L 18-20mm thick Granite (of any type) machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete, laid over and including 20mm thick backing layer in cement mortar 1:6 and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including demoliation of existing Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded in any cement mortar complete all as specified and as directed.

M&L 18-20mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete laid over and including 15mm thick backing layer in cement mortar 1:4 and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including demoliation of existing Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded in any cement mortar complete all as specified and as directed.

S&F mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe.290.Gde-E-165 including necessary preperation of surfaces and applying one shop coat of red oxide, zinc chrome primer, dismantling of existing unserviceable MS frame work complete all as specified and as directed.

S&F in repair Concertina coil 610mm dia, precoated with black anti-corrosive paint (weight 8Kg per coil expandable 6-8 mtr strech), short barb length 11+ 1mm thickness of tape 0.5mm, dia of spring core wire 2.6mm fixed on angle iron frames including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pin etc complete all as directed.

M&L complete removal of existing treatment surfaces of wall including cornices etc, necessary preparation of surfaces and applying two coats of white wash complete all as specified and directed

M&L preperation of old surfaces of wall and applying one coat of white wash complete all as specified and directed

RC Madan

A N BUILDERS

M/S N A CONSTRUCTION

R D ENTERPRISE

M/S L N ENTERPRISE

S H ENTERPRISES

Abdul Haque