REPAIR TO DOOR SHUTTERS, FALSE CEILING, BIRD PROOFING, TURBO VENT, ROOF SHITTING ETC IN TECH AREA AT NAGTALAO UNDER GE BANAR

Amount

Taking down Chowkats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) for turbo ventilator at height above 8 metre complete all as specified.

Taking down Chowkats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) and refixing in same opening for turbo ventilator at above 8mtr height, complete all as specified.

Resecuring without taking down Chowkats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) for turbo ventilator at above 8mtr height, complete all as specified.

S&F 600mm dia SS Turbo vent (24/22 inch), with complete 3mm FRP frame as per require pattern, 42 Vanes, SS base ring, weight not less than 5.5 Kg, Teflon point, fix with 8 screws in roofs of hangers at height above 8 meter complete all as specified.

S&F 600mm dia SS Turbo vent (24/22 inch), 42 Vanes, SS base ring, weight not less than 5.5 Kg, Teflon point without FRP frame, fix with 8 screws in roofs of hangers at height above 8 meter complete all as specified.

Excavating in post holes (or similar holes) in soft/loose soil each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.

S&F Rolled mild steel sections as in framing for cladding, glazing & the like fixed with angle cleats & connecting plates, etc.Fe 410-W (Gde-E- 250) quality-A at a height of 8 to 12 mtr complete all as specified.

S&F Wire netting aperture of size 20 mm galvanised steel wire 1.40mm dia fixed with tinned tacks of wire staples complete all as specified.

M&L for Reparing to hangar steel gates upto 8 mtr height and upto 4 mtr wide by welding & replacement ball bearings, hinges, oiling, greesing for smooth functioning of gates complete all as specified.

Dismantling of Plain or corrugated steel sheeting, any gauge,thickness, including Nainital or similar pattern roof coverings complete all as specified.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with hot dip galvanised self drilling fasteners with EPDM washers (one fastener on each crest) complete all as specified.

S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ridge/cladding to wall, fixed with self tapping screws complete all as specified.

S&F Galvanised, corrugated mild steel 0.63mm thick sheeting with two corrugations side lap, in roofs, walls etc. With grade of zinc coating 275 L- type or J-type hook bolts at a height of 8 to 12 mtrs or complete all as specified.

S&F 2 mm thickness fibre glass reinforced translucent corrugated (Polycarbonate) sheeting with two corrugation side lap fixe with coach screw and washer in roof, wall etc.complete all as specified.

M&L for preparation of new steel surface of any description over 10cm in width or grith and appling two coat of synthetic enamel paint over priming with Redoxide complete all as specified.

Preparing old painted steel surfaces of any description over 10cm grith or width and applying one coat of synthetic enamel paint complete all as specified.

M&L for closing small openings with HDPE nylone netting square or hexagonal, 1mm dia thread, opening shall not exceedig 5 sqm binded with nylone thread at a height of 6 to10 mtr complete all as specified.

M&L for closing small openings with steel wire netting of dia 1.40mm and aperture not greater than 20mm by welding to existing frame, opening shall not exceedig 4 sqm at a height of 6 to10 mtr complete all as specified.

S&F Wire netting aperture of size 20 mm galvanised steel wire 1.40mm dia fixed with tinned tacks of wire staples complete all as specified.

Dismantling 1mm dia and 1"X1" apeture square or hexagonal multithread HDFE Coplymer bird proof netting ultra voilet resistant fixed with nylone rope with 4mm dia GI wire complete all as specified.

S&F 1mm dia and 1"X1" apeture square or hexagonal multithread HDFE Coplymer bird proof netting ultra voilet resistant fixed with nylone rope with 4mm dia GI wire complete all as specified.

S&F for stainless steel spikes of 1.4mm dia along with 50mm wide rubber (protective pad) to fixed on desired location complete all as specified.

S&F in repairs Anodised aluminium snap grid frame work for false ceiling along with Armstrong Perforated particle board tiles for insulation and acoustic purposes 600x600 mm in size, 12 mm thick fixed with nails staples on snapgrid complete all as specified.

S&F in repair anodised aluminium snap grid frame work for false ceiling size 605x605mm complete all as specified.

S&F Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified.

S&F Calcium silicate board 8mm thick of siliceous and calcareous material reinforced with cellulose fibre for fixing upto size 2 X 2mtr grid complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.50 sqm but n exc 4 sqm each complete all as specified.

All as per item Ser No 28.00 above but n exc 1.5 sqm each complete all as specified.

S&F, Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F, Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips rubber neiprene packing, handles 2 nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified.

S&F, Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified.

Supply & Fix sheet glass 5.5mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified.

S&F in repair for door clouser(aluminium extruded body) hydreulically regulated, ,designation No 1 universal type, suitable for door shutters of 851 to 1000mm in width and of wieght not more than complete all as specified.

S&F floor door stopper of aluminium 150mm size complete all as specified.

S&F mild steel 4 Lever mortice lock, vertical type of size 100mm complete all as specified.

Shri Electrical Enterprises

Tirupati electricals works and services