Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.0 LAccepted-AOC DOOR NO 15 1 141 BHAVANA ENCLAVE 1 NEAR HOTEL GRAND BAY MAHARANIPETA NOWAROJI ROAD VISAKHAPATNAM 530002 | VISAKHAPATNAM | VISAKHAPATNAM | ANDHRA PRADESH | 530002 | L1 | Accepted-AOC Being Lowest Bidder | |
| 2 | L2₹32.2 L+₹45,930 (1.44%)Rejected-Finance | L2 | Rejected-Finance NOT BEING LOWEST BIDDER | |
| 3 | L3₹32.4 L+₹60,285 (1.90%)Rejected-Finance | L3 | Rejected-Finance NOT BEING LOWEST BIDDER | |
| 4 | L4₹34.1 L+₹2.3 L (7.32%)Rejected-Finance 66 6 410 1 MULAGANDA HOUSING COLONY GAJUWAKA DEPOT VISAKHAPATNAM 530026 | VISAKHAPATANAM | ANDHRA PRADESH | 530026 | L4 | Rejected-Finance NOT BEING LOWEST BIDDER | |
| 5 | L5₹35.0 L+₹3.2 L (10.1%)Rejected-Finance | L5 | Rejected-Finance NOT BEING LOWEST BIDDER |
| Sl No | Description | Qty | Unit | REAL ENGINEERING WORKS L8 | ANJANA ENTERPRISES L5 | SHIKHARA PROJECTS L7 | RATNA ENTERPRISES L6 | SRIESWARI ENTERPRISES L1 | GVR CONSTRUCTIONS L4 | SRASHA MARINE SERVICES L3 | Datha Engineering Enterprises L2 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00NOTES/INSTRUCTIONS FOR STRICT COMPLIANCE (a) The contractor shall obtain sample approval for all materials for incorporating in the work as per condition 10 of IAFW-2249 and Para-12 of Special Conditions of tender document mentioned here-in-after. (b) The GE may direct the contractor in writing to procure and deposit up to 80% of the material required for the complete scope of work. The decision shall be final and binding on the contractor. (c) The contractor shall deposit the procured material under intimation to GE to the store of concerned subdivision within 30 days from the receipt of written direction. Failure to do so shall result in a penal recovery of Rs 2000/- per week, levied on the dues of contractor, maximum up to 10% of the work done/CA Amount whichever is higher. (d) The contractor shall obtain approval of “Qualified Tradesman” as per condition 26 of IAFW-2249 before commencement of work at site and shall have sufficient manpower such as plumber, welder, helper etc readily available to meet the site requirement during emergency situation as per directions of Engineer-in-Charge/GE. (e) The quoted rates shall be inclusive of cost of necessary Tools, Plants, Safety Equipments, Machinery, Arrangements of Manual Dewatering/Dewatering pumps and Temporary lighting arrangements for work during night time etc as per site requirement. (f) The quoted rates shall be inclusive of cost for necessary scaffolding for working under AoR of GE (U-II). | |||||||||||
| 2.00 | Material and Labour for servicing of DG set of capacity 625 KVA of existing Make and model by carrying out the following maintenance as per manufacturers instructions including cleaning the engine, alternator, inferiors and exteriors of acoustic enclosure completely by blowering and with cotton waste and testing on completion at connected load for entire satisfaction, complete all as specified and directed:-
(a) Draining out engine oil from the sump by removing drain plug, cleaning the sump thoroughly and refilling the sump with new engine oil to required level.
(Note: Engine Oil will be measured and paid separately as 'Supply Only')
(b) Draining out of diesel from tank and storing in cleaned containers, cleaning the tank thoroughly by removing sediments settled at the bottom and refilling the drained out diesel duly filtered.
(c) Supply and replace complete set of engine oil filters, fuel filters, Bypass filter, air cleaner element and water separator.
(d) Draining out complete coolant water mixture from the radiator and re-filling the radiator with new coolant and water mixture with proportionate ratio.
(Note: Coolant will be measured and paid separately as 'Supply Only')
(e) Check and top up the electrolyte/distilled water in starting batteries to maintain the required specific gravity. Cleaning of battery terminals & applying petroleum jelly to battery poles & brass connectors.
(f) Checking and Tightening all the fasteners of complete DG set to the required torque, if required. | 2 | Each Job | 30,000 ₹60,000 | 29,999 ₹59,998 | 32,000 ₹64,000 | 28,000 ₹56,000 | 25,000 ₹50,000 | 36,000 ₹72,000 | 25,000 ₹50,000 | 20,000 ₹40,000 Lowest |
| 3.00 | All as per item No.2.00 here-in-before but for DG set of capacity 500 KVA of existing Make and model | 4 | Each Job | 27,000 ₹1,08,000 | 24,900 ₹99,600 | 25,000 ₹1,00,000 | 27,000 ₹1,08,000 | 20,000 ₹80,000 | 30,000 ₹1,20,000 | 22,000 ₹88,000 | 18,000 ₹72,000 Lowest |
| 4.00 | All as per item No.2.00 here-in-before but for DG set of capacity 400 KVA of existing Make and model | 2 | Each Job | 23,000 ₹46,000 | 21,500 ₹43,000 | 22,000 ₹44,000 | 24,000 ₹48,000 | 20,000 ₹40,000 | 25,000 ₹50,000 | 14,000 ₹28,000 Lowest | 15,000 ₹30,000 |
| 5.00 | All as per item No.2.00 here-in-before but for DG set of capacity 250 KVA of existing Make and model | 2 | Each Job | 19,000 ₹38,000 | 18,990 ₹37,980 | 18,000 ₹36,000 | 19,500 ₹39,000 | 15,000 ₹30,000 | 22,500 ₹45,000 | 10,500 ₹21,000 Lowest | 13,000 ₹26,000 |
| 6.00 | All as per item No.2.00 here-in-before but for DG set of capacity 200 KVA of existing Make and model | 2 | Each Job | 15,000 ₹30,000 | 14,500 ₹29,000 | 15,000 ₹30,000 | 15,500 ₹31,000 | 15,000 ₹30,000 | 20,000 ₹40,000 | 9,000 ₹18,000 Lowest | 12,000 ₹24,000 |
| 7.00 | All as per item No.2.00 here-in-before but for DG set of capacity 160 KVA of existing Make and model | 2 | Each Job | 14,000 ₹28,000 | 13,600 ₹27,200 | 12,000 ₹24,000 | 15,000 ₹30,000 | 12,000 ₹24,000 | 18,000 ₹36,000 | 8,000 ₹16,000 Lowest | 10,000 ₹20,000 |
| 8.00 | All as per item No.2.00 here-in-before but for DG set of capacity 125 KVA of existing Make and model | 2 | Each Job | 14,000 ₹28,000 | 9,999 ₹19,998 | 10,000 ₹20,000 | 13,500 ₹27,000 | 12,000 ₹24,000 | 17,000 ₹34,000 | 7,500 ₹15,000 Lowest | 9,500 ₹19,000 |
| 9.00 | All as per item No.2.00 here-in-before but for DG set of capacity 100 KVA of existing Make and model | 10 | Each Job | 10,000 ₹1,00,000 | 9,999 ₹99,990 | 10,000 ₹1,00,000 | 11,500 ₹1,15,000 | 10,000 ₹1,00,000 | 15,000 ₹1,50,000 | 6,100 ₹61,000 Lowest | 9,000 ₹90,000 |
| 10.00 | All as per item No.2.00 here-in-before but for DG set of capacity 82.5 KVA of existing Make and model | 6 | Each Job | 9,000 ₹54,000 | 7,900 ₹47,400 | 9,000 ₹54,000 | 9,500 ₹57,000 | 10,000 ₹60,000 | 13,500 ₹81,000 | 6,000 ₹36,000 Lowest | 7,000 ₹42,000 |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
12 Jan 2026, 6:00 pmClosed
Garrison Engineer Utility-II Visakhapatnam
Garrison Engineer Utility-II 104 Area Industrial Estate Post Visakhapatnam -530 007
REPAIR AND MAINTENANCE TO VARIOUS DG SETS, AMF PANELS, CABLES AND ALLIED WORKS UNDER GE (UTILITY-II) VISAKHAPATNAM
2025_MES_745578_1
8124(A)
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
Garrison Engineer Utility-II Visakhapatnam
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Garrison Engineer Utility-II
₹98,000
Yes
9 Feb 2026
22 Dec 2025
13 Jan 2026
22 Dec 2025
12 Jan 2026
6 Jan 2026
NOTES/INSTRUCTIONS FOR STRICT COMPLIANCE (a) The contractor shall obtain sample approval for all materials for incorporating in the work as per condition 10 of IAFW-2249 and Para-12 of Special Conditions of tender document mentioned here-in-after. (b) The GE may direct the contractor in writing to procure and deposit up to 80% of the material required for the complete scope of work. The decision shall be final and binding on the contractor. (c) The contractor shall deposit the procured material under intimation to GE to the store of concerned subdivision within 30 days from the receipt of written direction. Failure to do so shall result in a penal recovery of Rs 2000/- per week, levied on the dues of contractor, maximum up to 10% of the work done/CA Amount whichever is higher. (d) The contractor shall obtain approval of “Qualified Tradesman” as per condition 26 of IAFW-2249 before commencement of work at site and shall have sufficient manpower such as plumber, welder, helper etc readily available to meet the site requirement during emergency situation as per directions of Engineer-in-Charge/GE. (e) The quoted rates shall be inclusive of cost of necessary Tools, Plants, Safety Equipments, Machinery, Arrangements of Manual Dewatering/Dewatering pumps and Temporary lighting arrangements for work during night time etc as per site requirement. (f) The quoted rates shall be inclusive of cost for necessary scaffolding for working under AoR of GE (U-II).
Material and Labour for servicing of DG set of capacity 625 KVA of existing Make and model by carrying out the following maintenance as per manufacturers instructions including cleaning the engine, alternator, inferiors and exteriors of acoustic enclosure completely by blowering and with cotton waste and testing on completion at connected load for entire satisfaction, complete all as specified and directed:- (a) Draining out engine oil from the sump by removing drain plug, cleaning the sump thoroughly and refilling the sump with new engine oil to required level. (Note: Engine Oil will be measured and paid separately as 'Supply Only') (b) Draining out of diesel from tank and storing in cleaned containers, cleaning the tank thoroughly by removing sediments settled at the bottom and refilling the drained out diesel duly filtered. (c) Supply and replace complete set of engine oil filters, fuel filters, Bypass filter, air cleaner element and water separator. (d) Draining out complete coolant water mixture from the radiator and re-filling the radiator with new coolant and water mixture with proportionate ratio. (Note: Coolant will be measured and paid separately as 'Supply Only') (e) Check and top up the electrolyte/distilled water in starting batteries to maintain the required specific gravity. Cleaning of battery terminals & applying petroleum jelly to battery poles & brass connectors. (f) Checking and Tightening all the fasteners of complete DG set to the required torque, if required.
All as per item No.2.00 here-in-before but for DG set of capacity 500 KVA of existing Make and model
All as per item No.2.00 here-in-before but for DG set of capacity 400 KVA of existing Make and model
All as per item No.2.00 here-in-before but for DG set of capacity 250 KVA of existing Make and model
All as per item No.2.00 here-in-before but for DG set of capacity 200 KVA of existing Make and model
All as per item No.2.00 here-in-before but for DG set of capacity 160 KVA of existing Make and model
All as per item No.2.00 here-in-before but for DG set of capacity 125 KVA of existing Make and model
All as per item No.2.00 here-in-before but for DG set of capacity 100 KVA of existing Make and model
All as per item No.2.00 here-in-before but for DG set of capacity 82.5 KVA of existing Make and model
All as per item No.2.00 here-in-before but for DG set of capacity 62.5 KVA of existing Make and model
All as per item No.2.00 here-in-before but for DG set of capacity 50 KVA of existing Make and model
All as per item No.2.00 here-in-before but for DG set of capacity 40 KVA of existing Make and model
All as per item No.2.00 here-in-before but for DG set of capacity 30 KVA of existing Make and model
All as per item No.2.00 here-in-before but for DG set of capacity 20 KVA of existing Make and model
All as per item No.2.00 here-in-before but for DG set of capacity 10 KVA / 12.5 KVA of existing Make and model
Supply only engine oil of grade 15W-40 for various DG Sets, complete all as specified and directed. Make : K.Oil/Valvoline/Gulf/Castrol/Greaves
Supply only of premix coolant water mixture (50:50) suitable for DG sets, complete all as specified and directed. Make : K-cool/Cummins/Gulf/Castrol/Greaves
Supply and replace complete set of fuel pipes & leak off pipe with clamps suitable for existing make & model of DG set up to 400 KVA to 625 KVA capacity, complete all as specified and directed.
Supply and replace complete set of fuel pipes & leak off pipe with clamps suitable for existing make & model of DG set up to 125 KVA to 250 KVA capacity, complete all as specified and directed.
Supply and replace complete set of fuel pipes & leak off pipe with clamps suitable for existing make & model of DG set up to 100 KVA capacity, complete all as specified and directed.
Supply and replace 'V' belt suitable for existing make & model of DG set 400 KVA to 625 KVA capacity, complete all as specified and directed.
Supply and replace 'V' belt suitable for existing make & model of DG set 125 KVA to 250 KVA capacity, complete all as specified and directed.
Supply and replace 'V' belt suitable for existing make & model of DG set up to 100 KVA capacity, complete all as specified and directed.
Supply and replace complete set of hoses with clamps suitable for existing make & model of DG set 400 KVA to 625 KVA capacity, complete all as specified and directed.
Supply and replace complete set of hoses with clamps suitable for existing make & model of DG set 125 KVA to 250 KVA capacity, complete all as specified and directed.
Supply and replace complete set of hoses with clamps suitable for existing make & model of DG set up to 100 KVA capacity, complete all as specified and directed.
De-scaling of radiator assembly by carefully removing from the engine, transporting to civil workshop and removing the sediments, scales and rust etc by means of acid cleaning, high pressure water washing and air cleaning, arresting the leakages by gas welding / soldering with suitable material, re-assembling the same with new gaskets including replacement of radiator cap (wherever required) and transporting to the site, fixing to the engine for DG Set of capacity 400 KVA to 625 KVA and testing for satisfactory performance, complete all as specified and directed by Engineer-in-Charge.
All as per item No.28.00 here-in-before but for DG Set of capacity from 200 KVA / 250 KVA.
All as per item No.28.00 here-in-before but for DG Set of capacity from 100 KVA / 125 KVA.
All as per item No.28.00 here-in-before but for DG Set of capacity from 62.5 KVA / 82.5 KVA.
All as per item No.28.00 here-in-before but for DG Set of capacity from 40 KVA / 50 KVA.
All as per item No.28.00 here-in-before but for DG Set of capacity from 20 KVA / 30 KVA.
Dismantling the defective fuel injectors & FIP from the engine and Material & Labour for repair/calibration of fuel injectors & FIP including replacement of barrel, plunger, spring & ‘O’ rings etc. for DG Set of capacity 400 KVA to 625 KVA, complete all as specified and directed by Engineer-in-Charge.
All as per item No.34.00 here-in-before but for DG Set of capacity 200 KVA to 250 KVA.
All as per item No.34.00 here-in-before but for DG Set of capacity 100 KVA / 125 KVA.
All as per item No.34.00 here-in-before but for DG Set of capacity 62.5 KVA / 82.5 KVA.
All as per item No.34.00 here-in-before but for DG Set of capacity 40 KVA / 50 KVA.
All as per item No.34.00 here-in-before but for DG Set of capacity 10 KVA to 30 KVA.
Taking down unserviceable engine wiring and Material & Labour for rewiring of engine safety control system from control panel to engine control gadgets like HWT, LLOP, shut down valve, dynamo & self-starter etc with suitable gauge and grade of wires for DG set of capacity from 400KVA to 625 KVA, complete all as specified and directed by Engineer-in-Charge.
All as per item No.40.00 here-in-before but for DG Set of capacity from 100 KVA to 250 KVA.
All as per item No.40.00 here-in-before but for DG Set of capacity up to 82.5 KVA.
Dismantling the defective self starter assembly 12V/24V carefully from the DG set and carryout repair, rewinding and servicing by cleaning all accessories with suitable cleaning agent and supply and replace commutator, carbon brush set, carbon brush holder, king pin holder, armature choke nut, body screens, clutch plate assembly and solenoid etc, re-assembling and re-fixing the same and testing on completion for DG set of capacity from 400 KVA to 625 KVA complete all as specified and directed by Engineer-in-Charge.
All as per item No. 43.00 here-in-before but for DG Set of capacity from 100 KVA to 250 KVA.
All as per item No. 43.00 here-in-before but for DG Set of capacity up to 82.5 KVA.
Dismantling the defective 24 V battery charging alternator carefully from any capacity of DG set and carryout repair, rewinding and servicing by cleaning all accessories with suitable cleaning agent and supply and replace carbon brush, brush holders, bushes/bearings, varnishing etc, re-assembling and re-fixing the same and testing on completion, complete all as specified and directed by Engineer-in-Charge.
All as per item No. 46.00 here-in-before but 12 V battery charging alternator for any capacity of DG set.
Supply and connect battery connecting cable (1.50m long each) made out of PVC Insulated Plain/Striped Automobile Cables with high conductivity bright annealed copper conductor bunched together, insulated with dielectric grade PVC compound (impervious to oils, greases, acids, petrol and water) conforming to IS 2465 of size 25 sqmm soldered one end with brass connector with nuts and bolts for battery pole and the other with copper lug for self starter terminal including taking down of existing u/s battery connecting cable with connector and lug of any description, complete all as specified and directed by Engineer-in-Charge.
Supply and replace brass connector with bolt and nut suitable for positive/negative pole of battery of any size, complete all as specified and directed.
Taking down unserviceable AVR of any description from alternator including supply and fixing of new AVR of suitable model for existing alternator of capacity 400 KVA to 625 KVA, complete all as specified and directed by Engineer-in-Charge.
All as per item No. 50.00 here-in-before but for DG set of capacity 100 KVA to 250 KVA.
All as per item No. 50.00 here-in-before but for DG set of capacity up to 82.5 KVA.
Supply and replace battery 12V, 180 AH with 24 months full replacement warrantee for DG set including initial filling & charging, complete all as specified and directed by Engineer-in-Charge.
All as per item No. 53.00 here-in-before but of rating 12V, 120 AH.
All as per item No. 53.00 here-in-before but of rating 12V, 100 AH.
All as per item No. 53.00 here-in-before but of rating 12V, 80 AH.
Dismantling the defective alternator from DG set, transporting to civil work shop, separating the stator and rotor from alternator housing, cutting and removing burnt winding of stator completely, cleaning the slots and rewinding the stator with existing gauge of super enamelled copper wire with suitable grade of insulation, applying varnish and heating in heating chamber till completely dried and reassembling the alternator, transporting back to site and re-fixing to the DG set including proper alignment for smooth running and testing on completion for DG set of capacity 200 KVA / 250 KVA, complete all as specified and directed by Engineer-in-Charge.
All as per item No. 57.00 here-in-before but for DG set of capacity 100 KVA / 125 KVA.
All as per item No. 57.00 here-in-before but for DG set of capacity 62.5 KVA /82.5 KVA.
Supply and fix in replacement of left hand/ right hand hinge suitable for acoustic enclosure doors for DG set of any make and capacity 400 KVA to 625 KVA including removing of existing broken hinge, complete all as specified and directed by Engineer-in-Charge.
All as per item No. 61.00 here-in-before but for DG set of capacity 100 KVA to 250 KVA.
All as per item No. 61.00 here-in-before but for DG set of capacity up to 82.5 KVA.
Supply and fix in replacement of MCCB, 630 A, 3 Pole, 50 KA (Ics=100%Icu), 415 V, 50 Hz, with adjustable thermal magnetic release along with busbar spreader terminal plates including taking down existing unserviceable MCCB of any description, complete all as specified and directed by Engineer-in-Charge.
Supply and fix in replacement of MCCB, 400 A, 3 Pole, 50 KA (Ics=100%Icu), 415 V, 50 Hz, with adjustable thermal magnetic release along with busbar spreader terminal plates including taking down existing unserviceable MCCB of any description, complete all as specified and directed by Engineer-in-Charge.
Supply and fix in replacement of MCCB, 250 A, 3 Pole, 36 KA (Ics=100%Icu), 415 V, 50 Hz, with adjustable thermal magnetic release along with busbar spreader terminal plates including taking down existing unserviceable MCCB of any description, complete all as specified and directed by Engineer-in-Charge.
Supply and fix in replacement of MCCB, 160 A, 3 Pole, 36 KA (Ics=100%Icu), 415 V, 50 Hz, with fixed thermal magnetic release along with busbar spreader terminal plates including taking down existing unserviceable MCCB of any description, complete all as specified and directed by Engineer-in-Charge.
Supply and fix in replacement of MCCB, 25 to 100 A, 3 Pole, 16 KA (Ics=100%Icu), 415 V, 50 Hz, with fixed thermal magnetic release along with busbar spreader terminal plates including taking down existing unserviceable MCCB of any description, complete all as specified and directed by Engineer-in-Charge.
Servicing of AMF panel / Engine Control Panel of DG sets of various capacities by blowering, cleaning the complete panel with suitable cleaning agent and checking the controller relays, timer, contactors for proper functioning, replacing the defective spare parts, replacement of defective small wires of existing size, tightening of all connections and applying jelly on contactors, complete all as specified and directed by Engineer-in-Charge:- Note : Spare parts required will be measured and paid separately as 'Supply Only' but cost of small wires shall deemed to be included in the quoted rate.
Supply only of following spare parts suitable for existing DG set AMF Panels, 3 Phase, 415 Volts, 50 Hz, complete all as specified and directed :-
AMF relay complete assembly with digital display suitable for 400 KVA to 625 KVA DG set
AMF relay complete assembly with digital display suitable for 100 KVA to 250 KVA DG set
AMF relay complete assembly with digital display suitable for up to 82.5 KVA DG set
Microprocessor Based Genset Engine Controller for metering, monitoring, protecting and electronic governing of the engine suitable for 400 KVA to 625 KVA DG set
Microprocessor Based Genset Engine Controller for metering, monitoring, protecting and electronic governing of the engine suitable for 100 KVA to 250 KVA DG set
Microprocessor Based Genset Engine Controller for metering, monitoring, protecting and electronic governing of the engine suitable for up to 82.5 KVA DG set
Control relay
Timer
Battery Charging Unit 12 / 24 Volts
Auto / Manual switch complete assembly
Start/stop push button
LED indication lamps
Labour only for attending DG set complaints, checking fault in engine control wiring / genset controller / engine controller / AMF panel, LT panel etc and rectifying the fault by replacing defective spare parts by deploying engine technician / AMF panel technician / electrician etc as per site requirement at any time on any day including Sunday and Holiday, complete all as specified and directed by Engineer-in-Charge. Note: Spare parts required shall be measured and paid separately. However, cost of minor spare parts costing up to Rs. 500 shall deemed to be included in the quoted rate. Contractor should arrange the technician within 02 hours of intimation of complaint by JE E/M / Engineer-in-Charge and the complaint should be rectified as soon as possible but not later than 08 hours from the time of intimation. If contractor fails to arrange the technician and rectify the complaint within the specified time, a penal recovery of Rs. 500 per hour of delay beyond the specified time limit will be made from contractor's dues.
Material and labour for opening exciter and rectifier unit from the alternator of DG set of capacity 400 KVA to 625 KVA and finding the defective diodes in the rectifier unit, supply and replacing the defective rotating diode positive / negative and reassembling and refixing the exciter and rectifier unit and testing on completion for satisfactory working, complete all as specified and directed by Engineer-in-Charge.
All as per item No. 71.00 here-in-before but for DG set of capacity 100 KVA to 250 KVA
All as per item No. 71.00 here-in-before but for DG set of capacity up to 82.5 KVA
Supply, laying, connecting and testing of XLPE insulated, PVC sheathed, galvanized steel strip or wire armoured, stranded aluminium conductor cable of size 300 Sqm, 3.5 core including taking down of existing unserviceable cable of any description, complete all as specified and directed by Engineer-in-Charge.
All as per item No. 74.00 here-in-before but of size 185 Sqm, 3.5 core
All as per item No. 74.00 here-in-before but of size 95 Sqm, 3.5 core
All as per item No. 74.00 here-in-before but of size 50 Sqm, 3.5 core
All as per item No. 74.00 here-in-before but of size 25 Sqm, 4 core
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep and getting out in any type soil for laying pipes etc, complete all as directed by Engineer-in-Charge.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm, complete all as directed by Engineer-in-Charge.
Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as directed by Engineer-in-Charge.
Supply and spread clean dry river sand in trenches for cushioning of cable, complete all as specified and directed by Engineer-in-Charge. Note: Punned down thickness only shall be measured for the purpose of payment.
Supply and laying in trenches, un-reinforced precast concrete cable cover, ISI marked, Class LV, Type I, flat, size 250 mm x 150mm x 40mm for cable protection in trenches, complete all as specified and directed.
Material and labour for Surface dressing not exc 15cm deep in any type of soil and site clearance including cutting and removing of plants/bushes, levelling of surface area, throw wastage material out of fencing area/ compound wall up to 50m distance at sub station areas / pump House areas, complete all as specified and as directed by Engineer-in-Charge.
Supply, installation, testing and commissioning of Battery charger unit suitable for charging 02 x 12 V batteries, maximum current 12 Amps, Output Voltage 6-24V with connecting leads and clamps etc including taking down of existing unserviceable battery charger unit of any description, complete all as specified and directed by Engineer-in-Charge.
Material and labour for Cable jointing kit for 1100 Volts grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable of size 16 sqmm to 35 sqmm, complete all as specified and directed.
All as per item No. 86.00 here-in-before but for 3.5 core XLPE armoured aluminium conductor cable of size 50 sqmm to 95 sqmm
All as per item No. 86.00 here-in-before but for 3.5 core XLPE armoured aluminium conductor cable of size 120 sqmm to 185 sqmm
All as per item No. 86.00 here-in-before but for 3.5 core XLPE armoured aluminium conductor cable of size 240 sqmm to 400 sqmm
Material and labour for comprehensive tinkering and replacement of corroded sheets of the acoustic enclosure of DG sets of capacity 400 KVA of any make and model , covering removal and safe disposal of existing damaged sheet metal panels, supply and installation of new 1.6 mm thick GI sheets to replace corroded sections, complete with cutting, shaping, proper overlaps, and sealing; minor tinkering and repair of partially damaged areas involving welding, patching, and reinforcement; thorough surface preparation by cleaning, rust removal, de‑scaling, and application of one coat of red oxide primer followed by two coats of high‑quality industrial enamel paint (colour approved by the Engineer-in-Charge) with adequate drying time between coats; supply and installation of weather‑proof silicone sealant along all joints and edges to ensure acoustic integrity and water tightness; testing and commissioning of the enclosure to verify sound attenuation and structural integrity, complete all as specified and directed by Engineer-in-Charge.
All as per item No. 91.00 here-in-before but for DG set of capacity 62.5 KVA
All as per item No. 91.00 here-in-before but for DG set of capacity 50 KVA
SCHEDULE OF CREDIT Note :- Amount of Rs. 77,660.00 indicated in Tender Documents as Schedule of Credit shall be deducted from the total quoted amount of BOQ.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.39 MB
8124_Tender.pdf
Tender Documents • 0.66 MB
BOQ_834855.xls
BOQ • 0.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .