Loading
Loading…
Loading…
Tender Value
₹1.8 Cr
EMD Value
₹2.4 L
Closing Date
2 Apr 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
UTILITY
13 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-IX B of Tender Document, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited : (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. The Similar Nature of work defined as "Laying of LPG/CNG/PNG/Liquid Fuel pipelines"
8 conditions · 1 needing a document upload
Tenderer/Bidder is required to submit all the documents in support of their firm constitution/composition/form type as detailed at Para-29 & Para-30 of Chapter-3 of tender document.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The Bidder shall be required to deposit Bid Security of requisite value along with the Bid for the due performance with the stipulation to keep the offer open till such date as specified in the Bid, under the conditions of Bid. Tenderer(s)/Bidders are allowed to make payments against this tender towards Bid Security only through payment modes available on IREPS portal or as specified at Para-12 of Chapter-3 of Tender document.
The Bid Security shall be deposited either through e-payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure- IX A of this tender document (which has been uploaded and named as Annexure_IXA_Form_of_Bank_Guarantee_Bond_for_Bid_Security) and shall be valid for a period of 90 days beyond the bid validity period.
Bids not accompanied with full Bid security, in the requisite manner, shall under no circumstances be entertained and will summarily be rejected at the time of opening itself without further reference to the bidders.
Complete Erection, Installation & Testing of overhead PNG pipeline from DRS (IOCL) to NF, DF, sand plant, Tube Stand & Riser cutting station at RWP/Bela
RWP-UTL-PNG-2025
RWP-UTL-PNG-2025
Open
Works - General
365 Days
Saran, Bihar
₹0
₹2.4 L
2 Apr 2026
11 Mar 2026
19 Mar 2026
43 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,79,22,275.94 | ||
| — | Item Breakup | for details. | — | ||
| Supply & fabrication of 3D bends as per PMS, specification requirement, data sheet, manufacturer, testing of fabricated bend & transportation of fabricated bend to site for installation of sizes specified below. All the Fabrication and Testing shall be as per specification. The butt-weld end thickness of the bend shall meet the thickness of connected line pipe as specified below: Material - API 5L X 52 / ASTM A 860 WPHY 52, min. thk. 6.4 mm | — | — | — | 92,629.2 | |
| — | Item Breakup | for details. | — | ||
| Supply of Equal Tee, Rating 150 # Material -API 5L X 52 / ASTM A 860 WPHY 52 min. thk. 6.4 mm x 6.4 mm | — | — | — | 17,968.86 | |
| — | Item Breakup | for details. | — | ||
| Supply of Reducing Tee, Rating 150 # Material -API 5L X 52 / ASTM A 860 WPHY 52 min. thk. 6.4 mm x 6.4 mm | — | — | — | 46,940.36 | |
| — | Item Breakup | for details. | — | ||
| Flanges (WNRF), Rating 150 # Size | — | — | — | 35,504.48 | |
| — | Item Breakup | for details. | — | ||
| Blind Flanges (RF), Rating 150 # Size | — | — | — | 12,124.21 | |
| — | Item Breakup | for details. | — | ||
| Fasteners for Flanges # Size | — | — | — | 7,066.72 | |
| — | Item Breakup | for details. | — | ||
| Spiral Wound Metallic Gaskets - SWMG ANSI 150# Size | — | — | — | 6,989.98 | |
| — | Item Breakup | for details. | — | ||
| Supply of Valves Size | — | — | — | 14,04,860.05 | |
| — | Item Breakup | for details. | — | ||
| Supply of ASTM A106 Grade pipes | — | — | — | 56,26,949 | |
| — | Item Breakup | for details. | — | ||
| Supply of CS Concentric Reducer, 150# - A234 Gr. WPB, BW Sch. 80 | — | — | — | 5,623.84 | |
| — | Item Breakup | for details. | — | ||
| Supply of Miscellaneous mechanical items | — | — | — | 1,12,665.2 | |
| — | Item Breakup | for details. | — | ||
| CS Piping Erection, painting, flushing, testing & commissioning readiness of carbon steel piping including supply of pipes, fittings, flanges, valves, fabrication, installation, hook-up, and all consumables complete as per specifications | — | — | — | 35,72,729.5 | |
| — | 10.00 | — | — | ||
| Supply & installation of SS pressure gauges including tubing, impulse piping, manifolds, valves, fittings, fabrication, hydraulic testing and calibration complete as per tender specifications. | — | — | — | 65,845.4 | |
| — | 10.50 | — | — | ||
| Supply, fabrication & erection of MS pipe supports and structural works including clamps, saddles, guides, anchors, trestles, pipe bridges, platforms, ladders and cable tray supports with painting complete as per specifications | — | — | — | 7,11,942.63 | |
| — | Item Breakup | for details. | — | ||
| Welding of pipes with flanges including handling of free issue materials, fabrication, edge preparation, preheating, welding, supply & fixing of gaskets, bolts & nuts, and NDT complete as per specifications | — | — | — | 24,495.88 | |
| — | Item Breakup | for details. | — | ||
| Nitrogen purging & inertization of pipeline section up to 2 bar(g) including supply of nitrogen, equipment, manpower, monitoring and documentation complete as per specification. | — | — | — | 6,632.75 | |
| — | Item Breakup | for details. | — | ||
| Radiographic Inspection/UT & Pipe Joints RT | — | — | — | 6,52,023.75 | |
| — | 22.00 | — | — | ||
| Foundation work as per requirement | — | — | — | 4,53,630.54 | |
| — | Item Breakup | for details. | — | ||
| Design, manufacture, inspection, supply & delivery of Natural Gas Commercial Meter (RPD with EVC) including documentation, insurance, handling and commissioning assistance complete as per specification. | — | — | — | 16,79,446.09 | |
| — | Item Breakup | for details. | — | ||
| Design, manufacture, inspection, supply & delivery of Natural Gas Commercial Regulator including documentation, insurance, handling and commissioning assistance complete as per specification. | — | — | — | 6,52,301 | |
| — | — | — | 27,33,906.5 | ||
| — | :- GST @ | 18% on SN 01 to 20 | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TenderDocPNGWholeFinalver1.pdf Tender Document
ATTACHMENT
TenderDocPNGWholeFinalver1.pdf
ATTACHMENT
GCCACS11.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .