REPAIRS/RESURFACING OF ROADS, PATCH WORKS, ROAD SIDE FURNITURE, ROAD MARKING/PAINTING OF CERTAIN ROADS/ PATH AT KANNUR AND CALICUT MIL STNS UNDER GE (ARMY) TRIVANDRUM

M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming/ tack coat with bituminous primer using paving bitumen VG-10 grade at 5 Kg per 10 Sq metre using paving bitumen complete all as specified and directed.

M&L for Bituminous premixed carpet, 4 Cm consolidated thickness, with 0.54 Cu.m. of stone chippings mixed with 29.20 Kg of binder using paving bitumen VG-30, rolled and compacted to required camber and gradient complete all as specified and directed.

S&F road safety convex mirrors with 80 Cm dia. including fixing and anchoring complete including taking down old unserviceable convex mirror all as specified and directed. Make: Model No. OS-790 from OSCAR safety solutions or equivalent approved make.

S&F solar delineators which has red blinker and charged by solar energy fitted on MS pipe of 50 mm dia duly powder coated, anti-rust and anti-theft steel net including excavation of post holes in hard/ dense soil, filling of mass concrete type D2 (1:4:8) using 40 mm graded aggregate as in foundation (0.20 x 0.20 x 0.30 Mtr), removal of surplus soil and making good with existing surfaces, including taking down old unserviceable delineator all as specified and directed. Make: Sun Eye SE 202 or equivalent approved make.

M&L for preparing of new or previously treated road surfaces to receive painting lines, dashes, arrows, letters, etc. on road pavements and the like to delineate the roads properly and indicate warnings and directions using white/ yellow thermostatic road marking paint @ 5 Kg/ Sqm, mixed with glass beads @ 250 Gm/ Sqm, overall thickness measured 2.50 mm, applied by mechanical means i.e, dispenser machine complete all as specified and directed.

S&F cat eye with glass beads reflector, ABS plastic body material size 117 mm x 117 mm x 23 mm reflector 19 or 21 Bi-convex glass element on each side compressive strength upto 35 tons. Colour body yellow colour with red reflector, fixing by means of nail and epoxy, including taking down old unserviceable cat eye complete all as specified and directed.

S&F ABS speed breaker/ rubber rumblers including fixing with epoxy compound and anchoring with nails, including taking down old unserviceable speed breaker complete all as specified and directed. Make: Model No. OS-792 from OSCAR safety solutions or equivalent approved make.

M&L for retro-reflective sign board of size 4 feet x 3 feet made out of ACP sheet 3-5 mm thick and fixed on MS frame hollow tubular section of 25 mm. The board shall be sheathed with reflective tape of blue/ green colour, letters shall be written single side in white colour writing of approved colour. The sign board supported on 02 Nos post of 63 mm dia MS pipe 4 Mtr long duly welded or fixed on MS nuts bolts of required size as approved by GE. MS pipe fixed to the ground with 02 Nos of 40 mm size 60 cm long MS angle iron welded to the bottom of MS pole including necessary excavation, returning filling and MS poles with sign board to be fixed with cement concrete 1:2:4 type B-1, including taking down old unserviceable sign board complete all as specified and directed.

M&L for retro-reflective sign board of size 6 feet x 4 feet made out of ACP sheet 3-5 mm thick and fixed on SS 304 series hollow tubular section of 40 mm. The board shall be sheathed with reflective tape of blue/ green colour, letters shall be written on both sides in white colour (up to 60 letters on each side of board) of required shape and size as approved by GE. The sign board supported on 02 Nos post of 60 mm dia SS pipe 304 series 4 Mtr long duly welded or fixed on SS nuts bolts of required size as approved by GE. SS pipe fixed to the ground with 02 Nos of 50x50x6 mm size 60 cm long MS angle iron welded to the bottom of SS pole including necessary excavation, returning filling and MS poles with sign board to be fixed with cement concrete 1:2:4 type B-1, including taking down old unserviceable sign board complete all as specified and directed.

S&F solar stud made out of casting with 3 LEDs on each side fixed with epoxy compound including cleaning of existing surface complete all as directed by Engr-in-charge including taking down old unserviceable solar stud as directed.

Please Enable Macros to View BoQ information