CWE/AF AMB/AMB-T09/2026-27 PROVN OF HT SUPPLY FROM WT 05 TO WT 08 AT SITE II RAJPURA UNDER GE AF AMBALA

Supply, laying, jointing, testing & commissioning in replacement of HT XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 11000 volts (earthed), ISI marked with IS-7098 Part II with amendments upto date, size of cross sectional area 185 Sqmm, 3 core, laid as in trenches or fixed along the wall/pole or passing through pipes/ducts etc, complete all as specified & directed. Notes : (i) Cable shall be of manufacturing date not earlier than Jun 2025. All the cable shall be embossed with year of manufacturing, meterage at every metre, in addition to its own standard markings as per IS i.e. Size, voltage etc. (ii) Excavation & earth work, sand cushioning, protection pipes, end termination joints & protection covers shall be measured and paid separately. (iii) No straight through joint shall be permitted in less than single drum length. (iv) The contractor shall produce original purchase vouchers duly machine numbered alongwith excise duty gate pass of factory for verification and record. (v) Cable shall be tested in the presence of Representative of Accepting Officer at factory premises prior to despatch as and when requested by contractor through GE.

Supply and fixing cable jointing kit for 11 KV (Earthed) grade cable for End Termination (Heat shrinkable type) joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 185 sqmm complete all as specified & directed.

Supply and fixing cable jointing kit for 11 KV (Earthed) grade cable for Straight Through (Heat shrinkable type) joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 to 185 sqmm complete all as specified & directed.

Material and labour for plain cement concrete (PCC) 1:2:4, type B-1, using 20 mm graded mechanically crushed stone aggregates as in coping to pole etc. including necessary formwork to exposed surface finished even & smooth complete all as specified & directed.

Material and labour for plain cement concrete (PCC) 1:4:8, type D-2, using 40 mm graded mechanically crushed stone aggregates as in foundations, filling and mass concrete etc. complete all as specified & directed.

Material and labour for plain cement concrete (PCC) 1:3:6, type C-2, using 40 mm graded mechanically crushed stone aggregates as in foundations, filling and mass concrete etc. complete all as specified & directed.

Material and labour for double wall corrugated (DWC) HDPE pipe outer dia 125mm as per IS 14930(part-2):2001 with end cap laid as in trenches / under road / under floor or fixed to wall / pole with fixing arrangement with suitable size of MS clamps made out of 40mm x 3mm size flat iron including nuts, bolts & washers for cable protection complete all as specified & directed.

Excavation in trenches, not exc 1.5 metre in depth for foundation, laying pipes/cables etc. or for shafts, wells, cesspits, manholes, pier holes, etc. and getting out, in soft/loose type of soil complete all as specified & directed.

Removal of excavated surplus soil to a distance not exceeding 50 mtr & depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified & directed.

Returning filling in including spreading leveling watering and well ramming in layers not exceeding 25cm thick each in soft/loose type of soil complete all as specified & directed.