Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.9 LAccepted-AOC THEKKEKOTTARAM RAMANTHALI PO KANNUR DIST KERALA 670 308 | RAMANTHALI | KANNUR | KERALA | 670308 | L1 | Accepted-AOC L1 bidder accepted after deducting schedule of credit amount | |
| 2 | L2₹16.1 L+₹2.0 L (14.5%)Rejected-Finance PMC 24 528 GROUND FLOOR NEAR PAYYANUR SERVICE CO OP BANK KOTTY BRANCH PAYANNUR KANNUR KERALA 670307 | PAYYANUR | KANNUR | KERALA | 670307 | L2 | Rejected-Finance Other than lowest tenderer | |
| 3 | L3₹17.0 L+₹2.9 L (20.8%)Rejected-Finance C 234 ADG P CHENNAI | L3 | Rejected-Finance Other than lowest tenderer | |
| 4 | L4₹18.6 L+₹4.6 L (32.4%)Rejected-Finance BLDG NO XI 74 NEAR VALLARAM KULLANGARA TEMPLE KUNHIMANGALAM KOVVAPPURAM PO KANNUR DIST KERALA 670309 | KANNUR | KERALA | 670309 | L4 | Rejected-Finance Other than lowest tenderer | |
| 5 | L5₹23.9 L+₹9.9 L (70.2%)Rejected-Finance DOOR NO IV 400 NEAR RAMANTHALI GHSS RAMANTHALI PO KANNUR 670308 | KANNUR | KERALA | 670308 | L5 | Rejected-Finance Other than lowest tenderer |
Tender Value
₹19.8 L
EMD Value
₹39,600
Closing Date
25 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(MAINT)EZHIMALA
GARRISON ENGINEER (MAINT) MILITARY ENGINEER SERVICES INDIAN NAVAL ACADEMY POST KANNUR DIST KERALA 670 310
AS PER BOQ AND TENDER DOCUMENTS
2024_MES_644366_1
GE MAINT EZHIMALA 8625
Open Tender
Civil Works
Item Rate
60 days
EZHIMALA
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE MAINT EZHIMALA
₹39,600
Yes
24 Apr 2024
27 Feb 2024
27 Mar 2024
27 Feb 2024
25 Mar 2024
12 Mar 2024
28 Feb 2024 - 6 Mar 2024
Amount
Notes for all items of BOQ:- 1.Contractor needs to purchase minimum 50% of all items (other than paints) mentioned in this CA within 20 days of getting sample approval and kept in custody so that no delay in work due to non availability of materails will be faced. Contractor should ensure during the cause of work that he has minimum 25% of materials with him till the completion of item/date. 2.Rate quoted for demolition/dismantling/ taking down is inclusive of removing the same from site and dumping at given locations anywhere inside INA Ezhimala. 3.In any painting works, contractor need to work by putting proper covering on floors and furniture items before painting, clean the area and remove the drop marks from floors. Otherwise a recovery of Rs.10.00 per sqm in internal paintings and Rs 5.00 per sqm for external paintings will be made from contractor. Any paint drops /marks already present should be shown to Engg in Charge prior to starting of work. 4. Contractor should maintain separate registers for plumbing and carpenter repair works. Day today complaints should be noted in those registers with Sl nos of complaints, location, qty of work, status of complaints and signature of in charge and stamp of the Office. Format will be given from AGE B/R 1 Office. Contractor should obtain the signature of in charge on the same day of work. These registers are to be submitted to JE (Civil) on every weekend without fail. 5. Contractor need to understand that this contract is to do works in break period and should employ maximum number of labour to finish the entire work within stipulated period. 6. Contractor need to bring full qty of paints as per CA in one time and should number them with permanent markers. The same empty buckets of paints should be kept in safe custody and should show to Engg in Charge at the time of preparation of bills.
M&L for preparation of old decorated surfaces and applying one coat of acrylic emulsion (interior grade) on wall including necessary scaffoldings all as specified, as per manufacturer's instructions and as directed.
M&L for preparation of old decorated surfaces and applying one coat of acrylic emulsion (interior grade) on ceiling including necessary scaffoldings all as specified and as per manufacturer's instructions.
M&L for preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of old wooden surfaces of any description and applying one coat of synthetic varnish/french polish complete all as specified and as directed.
Taking down shutter of any description exc 1 Sqm but n exc 2 Sqm each and refixing the same after carrying out repairs including providing new necessary aluminium / MS rods as extra stiffening members for doors and refixing in same position complete all as specified and as directed.
Taking down chowkats or frames of any description and size but without taking off shutters from the frames exc 1.5 sqm each complete all as specified and as directed.
Taking down shutters of any description and any material exc 1 sqm but n.exc 2 Sqm complete all as specified and as directed.
S&F powder coated aluminium sections for frame and shutters of doors, windows, ventilators, partitions etc with one or more rebates including necessary neoprene packing etc complete all as specified and as directed. Note:- Minimum thickness of powder coating shall not be less than 50 micron.
S&F in repairs aluminium composite panel 4mm thick of approved colour and shade fixed to wooden / aluminium frame work as in door/cupboard shutters complete all as specified and as directed.
S&F 150mm anodised aluminium barrel tower bolt of extruded section complete all as specified and as directed.
S&F 150mm extruded aluminium anodised alloy handles fabricated type complete all as specified and as directed.
S&F 100mm stainless steel butt hinges, cold rolled medium weight complete all as specified and as directed.
S&F 150mm stainless steel butt hinges, cold rolled medium weight complete all as specified and as directed.
S&F 300mm aluminum alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified and as directed.
S&F mortice lock 100 mm to 150mm long matching with the existing doors and locks 4 lever vertical type complete all as specified and as directed.
S&F in repairs 75 mm anodised aluminium barrel tower bolt of extruded section complete all as specified and as directed.
S&F in repairs 100 mm anodised aluminium barrel tower bolt of extruded section complete all as specified and as directed.
S&F in repairs 150mm anodised aluminium barrel tower bolt of extruded section complete all as specified and as directed.
S&F in repairs 100 mm extruded aluminium anodised alloy handles fabricated type complete all as specified and as directed.
S&F in repairs 150mm extruded aluminium anodised alloy handles fabricated type complete all as specified and as directed.
S&F in repairs 75 mm stainless steel butt hinges, cold rolled medium weight complete all as specified and as directed.
S&F in repairs 100 mm stainless steel butt hinges, cold rolled medium weight complete all as specified and as directed.
S&F in repair aluminium powder coated ebco handles 100 to 150 mm, suitable for locking windows / ventilators complete all as specified and as directed.
S&F in repair 250 mm aluminum alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified and as directed.
S&F in repair 300mm aluminum alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified and as directed.
S&F in repair mortice lock 100 mm to 150 mm long suitable for existing aluminium doors matching with the existing lock and door 4 lever vertical type complete all as specified and as directed.
S&F in repair aluminum anodized tubular towel rail 20mm dia including brackets complete all as specified and as directed.
S&F in repair floor door stopper 150mm size aluminium alloy body and tongue double legged, anodised fixed to door complete all as specified and as directed.
S&F in repair aluminum (die cast) body door closer hydraulically regulated designation No 2 universal type suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg complete all as specified and as directed.
S&F in repair aluminium coat hook solid body matching with existing ones complete all as specified and as directed.
S&F in repair aluminium hasp and staple 75 mm aluminium anodised and fixed with screws complete all as specified and as directed.
S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished etc complete all as specified and as directed.
S&F in repair aluminium expanded metal mesh 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminum staples or beading complete all as specified and as directed. Note:- Rate of taking down and refixing of shutters of any description for repair of mesh is deemed to be included in the quoted rate.
S&F in repair SS 304 friction stay of 400 mm long suitable for window/ventilator shutters, including taking down and refixing of shutter for fixing of friction stay complete all as specified and as directed.
Dismantling wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards/ slabs/ any thickness including cover fillets complete all as specified and as directed.
M&L for 4mm thick non-asbestos fiber cement building boards with decorative finish on one face fixed or laid/inserted to timber, GI/aluminium framework with screws complete all as specified and as directed.
S&F in repair anodised aluminium snap grid frame work for false ceiling. The snap grid frame work shall be fixed to ceiling with supporting hanger consisting of 6mm dia mild steel rod, J bolts with necessary bolts, nuts and washers. The snap grid (main/cross tee section) supported at ends shall be 40mm x 25mm x 2mm weighing 0.36 Kg/RM and the main & cross tee shall be jointed at junction/ crossing with angle bracket of size 15mm x 15mm x 1.5mm, weighing 0.12 Kg/RM and fixed with hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden / aluminum frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.
M&L for 4.8 mm thick sheet glass ordinary quality any size in each pane and glazing with aluminium beading complete all as specified and as directed.
M&L for plywood 18 mm thick, grade BWP, type BB, having one side decorative teak veneer fixed with screws to timber frame work, in repairs of drawers and parts of fixed builtin furniture complete all as specified and directed including taking down of old plywood.
M&L for plywood 12 mm thick, grade BWP, type BB, fixed with screws to timber frame work and repair to drawers complete all as specified and directed including taking down of old plywood.
M&L for 0.9 mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions including taking down of old laminate complete all as specified and as directed.
Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.
M&L for vitrified ceramic light shade tiles 10mm thick ( square / rectangular ), polished, area of each tiles exceeding 0.36 Sqm, n.exc 1 sqm in floors etc. set and jointed in neat cement slurry over and including 15mm thick screed bed in CM 1:6/ approved tile adhesive all as specified. Width of tile joints should be 4 mm and the same shall be filled with approved epoxy grout complete all as specified and as directed.
M&L for vitrified ceramic tiles 10mm thick (square/rectangular), light shade polished, area of each tiles exc 0.36 sqm and not exc. exceeding 1 sqm, in skirting/dado etc. set and jointed in neat cement slurry including 15 mm thick backing coat plaster in CM (1:4) / approved tile adhesive (work shall be carried out in patches).Width of tile joints should be 4 mm and the same shall be filled with approved epoxy grout complete all as specified and as directed.
S&F in repair 400 to 500 mm long telescopic channel SS 304 fixed on existing cupboard drawers including taking down of old one complete all as specified and as directed.
S&F in repair vitreous china wash basin counter sunk type oval shape, star white including waste coupling chromium plated, fixing brackets, cutting for and pinning in ends of brackets complete all as specified and as directed. Make:- Hindware Cat No. 10049 or equivalent in Parryware/Cera.
S&F in repair water closet pedestal pattern white colour including seat cover, fixing bolts, connection to flush tank, connection to trap etc complete all as specified and as directed.
S&F in repair vitreous china urinal, half stall type, white coloured with and including all fixing accessories complete all as specified and as directed.
S&F in repair vitreous china urinal partition white of size 310x700 mm with and including all fixing accessories complete all as specified and as directed.
S&F pillar taps in repair 15 mm size, brass chromium plated swan neck type screwed down high pressure screwed for iron pipe & fixed complete all as specified and as directed. Make:- Jaquar Model No CON-CHR-167KNB or equivalent models in Parryware/ Hindware/Cera.
S&F in repair PVC valve less syphonic action type flushing cistern low level with inlet ball valve float and handle including brackets 10 ltrs capacity complete all as specified and as directed.
S&F in repairs bib tap 15 mm size, brass chromium plated rust proof complete all as specified and as directed. Make:- Jaquar Model No COS -103037 or equivalent models in Parryware/ Hindware/Cera.
S&F in repairs 15mm dia angular stop valve, brass chromium plated complete all as specified and as directed. Make:- Jaquar Model No FLR - CHR-5053 N or equivalent models in Parryware/ Hindware/Cera.
S&F in repair brass CP wall mixer 15 mm dia bore for mixing hot and cold water screwed down for iron pipe and fixed all as specified and directed by Engineer-in-charge. Make:- Jaquar Model No FLR-CHR-5281N or equivalent models in Parryware/ Hindware/Cera.
S&F in repair urinal spreader of brass chromium plated fancy type suitable for 15 mm bore pipe complete all as specified and as directed. Make:- Cera Model No F8070201 or equivalent models in Parryware/ Hindware/Cera.
S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.
S&F in repairs tubular towel rail 20mm dia brass chromium plated including brackets complete all as specified and as directed.
S&F in repair chromium plated towel ring round with round flange complete all as specified and as directed. Make:- Jaquar Model No ACN-CHR-1121 BN or equivalent models in Parryware/ Hindware/Cera.
S&F in repair stainless steel soap dish of approved pattern complete all as specified and as directed. Make:- Jaquar AKP-CHR-35731P or equivalent models in Parryware/ Hindware/ Cera.
S&F in repair chromium plated health faucets (hand held shower type) with shut off valve (thumb or push button type) to allow controlled and continuous flow of water with adequate length and wall mounted pedestal for hanging the faucet etc complete all as specified and as directed. Make:- Jaguar model No ALD CHR 565 or equivalent models in Parryware/ Hindware/ Cera.
S&F in repair CP brass toilet paper holder complete all as specified and as directed.
S&F in repair CP brass shower rose with arm complete all as specified and as directed.
S&F in repair modular switch one way 6 Amps 1 module ISI marked complete all as specified and directed by Engineer-in-Charge.
S&F in repair modular socket 6 Amps 2 module multi pin ISI marked complete all as specified and directed by Engineer-in-Charge.
S&F in repair white cover plate 2/3/4 module including taking down the defective one complete all as specified and directed by Engineer-in-Charge.
S&F in repair condenser 2.5mfd, AC 440 Volts suitable for ceiling fan/exhaust fan complete all as specified and directed by Engineer-in-Charge.
S&F in repair fan regulator (Modular) electronic step up type 100/120 Watt AC 230 Volts complete all as specified and directed by Engineer-in-Charge.
S&F in replacement LED lamp 10 Watt B22 suitable for batten/ pendent holder complete all as specified and directed by Engineer-in-Charge. Make:- Havells/Crompton/Philips/Bajaj/Wipro.
S&F in replacement of old unserviceable decorative ultra slim round profile 1 feet 5Watt output lumens greater than 110 lumens /watt,efficiency 110 lumen/watt, life 30000 hrs, surge protection 2.5Kv, power factor > 0.98, THD 20% LED lighting with extruded poly carbonate ready to use pack making connection to existing ceiling rose to fitting with 3 core, 1 sqmm copper conductor including making good the existing disturbed surface using wall putty and matching colour emulsion paint complete all as specified and directed by Engineer-in-Charge. Make:- Havells. Model No. ELITE PRIDE PLUS 5W LED 6000K or equivalent in Philips/Wipro/Havells/Bajaj Note:- LM79 report accredited by NABL certified lab should be submitted.
S&F in replacement old unserviceable wall mounted 10 W 2 ft LED batten, out put lumen ≥ 100 lumen/watts, CCT ≥5500k, efficacy 100 lumen per watt, life 50,000 burning hrs, aluminum body, surge protection 4kV, power factor ≥ 0.95, THD ≤10%, extruded channel in thermally conductive material for efficient heat dissipation with Polycarbonate diffuser and integrated electronic driver making connection to ceiling rose to fitting with 3 core 1 sqmm copper conductor complete all as specified and directed by Engineer-in charge. Make:- Crompton model No. CCS-103-10-65-SL-DP-NWH or equivalent in Philips/Wipro/Havells/Bajaj. Note:- LM79 report accredited by NABL certified lab should be submitted.
S&F in replacement old unserviceable wall mounted 20 W 4 ft LED batten, out put lumen >110 lumen/watts, efficiency 120lumen per watt, life 50,000 burning hrs, aluminum body, surge protection 4kV, power factor > 0.98, THD <10%, extruded channel in thermally conductive material for efficient heat dissipation with Polycarbonate diffuser and integrated electronic driver making connection to ceiling rose to fitting with 3 core 1 sqmm copper conductor complete all as specified and directed by Engineer-in charge. Make:- Crompton Model TRIM LINE NEU CCS-103-20-65-SL-DP-NWH or equivalent in Philips/Wipro/Havells/Bajaj. Note:- LM79 report accredited by NABL certified lab should be submitted.
S&F in replacement of old unserviceable LED bulk head fitting 10W output lumen greater than 110 lumen/watts, efficiency 110 lumen per watt, life 50000 burning hrs, surge protection 4Kv, power factor >0.98, THD <10%, CRI ≥80 , IP 65 surface mounted LED, PMMA diffuser, powder coated white finish housing with driver making connection to ceiling rose to fitting with 3 core 1 sqmm copper conductor including taking down the unserviceable items complete all as specified and directed by Engineer-in-Charge. Make:- Crompton Model STUD- LBHP-10-CDL or equivalent in Philips/Wipro/ Havells/Bajaj. Note:- LM79 report accredited by NABL certified lab should be submitted.
Gates Infra Construction Co
GMS Builders
RS ENTERPRISES
SREEKRUPA ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .