CONTROL VALVE

CONTROL VALVE Tag Number : LCV6617,DCDA PLANT Service : IAT PUMP TANK LEVEL Line Size/Schedule/Material : 100mm / Sch40 / CS Fluid/State : Sulphuric Acid(98.4%)/Liquid Electrical Class : General PROCESS DATA: Flow in Kg/Hr (Min/Max/Nor.) : 3000 / 35000 / 30000 Inlet Pr. in kg/cm2 (Min./Max./Normal): 3 / 6 / 4 Outlet Pr.in kg/cm2 (Min./Max./Normal): 1 / 1 / 1 Temp. Deg.C : 45 Diffl. Pr. in kg/cm2 Sizing/Shut off : 3 / 6 Density/Comp. Factor/ Mol wt : 1840 / -- / 98 Noise level to be less than 90dBA : Yes BODY Type of valve : Globe, Single Seat Body Size/Port Size : 80mm / Mfr to furnish Guiding/No. of ports : Top / One End connection ANSI : 150# RF Body material : ALLOY 20 Bonnet Type (Std/Extd/Finned) : Std Packing material : Steel impregnated PTFE Trim form/Trim type. : =% Trim material-plug with stem and seat : Alloy20 + Teflon insert Bonnet studs and nuts material : Alloy20 Gland follower, Stud,Flange material : Alloy20 Leakage class : VI Flow tending to : Open ACTUATOR: Actuator Type : Spring-Diaphragm Fail position : Close Handwheel/Location : Required / Side POSITIONER: Positioner Air Supply Pressure : 4.0 Kg/cm2 signal : 4-20mA+HART Positioner Gauges : Required,Case SS304,white dial, Bourden SS316 ACCESSORIES: Air Set : Required Pneumatic tubing size : 8mm.SS304 Support legs and lifting lugs shall be provided. Piping,fittings and accessories shall be constructed from SS304 and mounted on a SS304 back plate (panel) installed on the actuator. Painting shall be done as per fluid/standard. Serial Number should be punched on Valve Body.

CONTROL VALVE Tag Number : HCV6634,DCDA PLANT Service : Oleum to IAT Line Size/Schedule/Material : 150mm /Sch40 / CS Fluid/State : Oleum / Liquid Electrical Class : General PROCESS DATA: Flow in Kg/Hr (Min/Max/Nor.) : 2500 / 35000/ 25000 Inlet Pr. in kg/cm2 (Min./Max./Normal) : 3 / 6 / 4 Outlet Pr.in kg/cm2 (Min./Max./Normal) : 0.5 / 0.5 / 0.5 Temp. Deg.C : 72 Diffl. Pr. in kg/cm2 Sizing/Shut off : 3.5 / 6 Density/Comp. Factor/ Mol wt : 1905 / -- / 178 Noise level to be less than 90 dBA : Yes BODY Type of valve : Globe Single seat Body Size/Port size : 80mm / Mfr to furnish Guiding/No. of ports : Top / One End connection ANSI : 150# RF Body material : ALLOY 20 Bonnet Type (Std/Extd/Finned) : Std Packing material : Steel impregnated PTFE Trim form/Trim type : =% Trim material-plug with stem and seat : Alloy20+ Teflon insert Bonnet studs and nuts material : Alloy20 Gland follower,stud, Flange material : Alloy20 Leakage class : VI Flow tending to : Open ACTUATOR: Actuator Type : Spring-Diaphragm Fail position : Close Handwheel/Location : Required / Side POSITIONER: Air Supply Pressure : 4.0 Kg/cm2 signal : 4-20mA+HART Positioner Gauges : Required,Case SS304,white dial, Bourden SS316 ACCESSORIES: Air set : Required Pneumatic tubing size, Material : 8mm, SS304 Support legs and lifting lugs shall be provided. Piping,fittings and accessories shall be constructed from SS304 and mounted on a SS304 back plate / panel installed on the actuator. Painting shall be done as per fluid/standard. Serial Number should be punched on Valve Body flange.

CONTROL VALVE Tag Number : ACV6633,DCDA Plant Service : Oleum Concentration Line Size/Schedule/Material : 150mm / Sch40/ CS Fluid/State : Sulphuric Acid(98.4%)/Liquid Electrical Class : General PROCESS DATA: Flow in Kg/Hr (Min/Max/Nor.) : 2400 / 35000 / 24000 Inlet Pr. in kg/cm2 (Min./Max./Normal): 3 / 6 / 4 Outlet Pr.in kg/cm2 (Min./Max./Normal): 0.5 / 0.5 / 0.5 Temp. Deg.C : 65 Diffl. Pr. in kg/cm2 Sizing/Shut off : 4 / 6 Density/Comp. Factor/Mol wt : 1840 / -- / 98 Noise level to be less than 90dBA : Yes BODY Type of valve : Globe, Single seat Body Size/Port size : 80mm / Mfr to furnish Guiding/No. of ports : Top / one End connection ANSI : 150# RF Body material : ALLOY 20 Bonnet Type (Std/Extd/Finned) : Std Packing material : Steel impregnated PTFE Trim form/trim type. : =% Trim material-plug with stem and seat: Alloy20+ Teflon insert Bonnet studs and nuts material : Alloy20 Gland follower,Stud,Flange material : Alloy20 Leakage class : VI Flow tending to : Open ACTUATOR: Actuator Type : Spring-Diaphragm Fail position : Close Handwheel/Location : Required / Side POSITIONER: Air Supply Pressure : 4.0 Kg/cm2 signal : 4-20mA+HART Positioner Gauges : Required,Case SS304,white dial,Bourden SS316 ACCESSORIES: Air set : Required Pneumatic tubing size : 8mm. SS304 Support legs and lifting lugs shall be provided. Piping,fittings and accessories shall be constructed from SS304 and mounted on a SS304 back plate (panel) installed on the actuator. Painting shall be done as per fluid/standard. Serial Number should be punched on Valve Body.

CONTROL VALVE Tag Number : LCV6609, DCDA PLANT Service : ADT PUMP TANK LEVEL Line Size/Schedule/Material : 100mm/Sch40/CS Fluid/State : Sulphuric Acid(96%)/Liquid Electrical Class : General PROCESS DATA: Flow in Kg/Hr (Min/Max/Nor.) : 10766.6 / 114000 / 107666 Inlet Pr. in kg/cm2 (Min./Max./Normal) : 3 / 6 / 3.6 Outlet Pr.in kg/cm2 (Min./Max./Normal) : 1 /1 / 1 Temp. Deg.C : 50 Diffl. Pr. in kg/cm2 Sizing/Shut off : 3.6 / 4 Density/Comp. Factor/Mol wt : 1840 / -- / 98 Noise level to be less than 90dBA : Yes BODY Type of valve : Globe Single seat Body Size/port size : 80mm / Mfr to furnish Guiding/No.of ports : Top / One End connection ANSI : 150# RF Body material : ALLOY 20 Bonnet Type (Std/Extd/Finned) : Std Packing material : Steel impregnated PTFE Trim form/Trim type : =% Trim material-plug with stem and seat : Alloy20+ Teflon insert Bonnet studs and nuts material : Alloy20 Gland follower,Stud, Flange material : Alloy20 Leakage class : VI Flow tending to : Open ACTUATOR: Actuator Type : Spring-Diaphragm Fail position : Close Handwheel/Location : Required / Side POSITIONER: Air Supply Pressure : 4.0 Kg/cm2 signal : 4-20mA+HART Positioner Gauges : Required,Case SS304,white dial,Bourden SS316 ACCESSORIES: Air set : Required Pneumatic tubing size : 8mm.SS304 Support legs and lifting lugs shall be provided. Piping,fittings and accessories shall be constructed from SS304 and mounted on a SS304 back plate (panel) installed on the actuator. Painting shall be done as per fluid/standard. Serial Number should be punched on Valve Body.

CONTROL VALVE Tag Number : ACV6609,DCDA Plant Service : ADT ACID CONCENTRATION Line Size/Schedule/Material : 150mm/Sch40/CS Fluid/State : Sulphuric Acid(98.4%)/Liquid Electrical Class : General PROCESS DATA: Flow in Kg/Hr (Min/Max/Nor.) : 10504 / 110750 / 105040 Inlet Pr. in kg/cm2 (Min./Max./Normal) : 3 / 6 / 3.6 Outlet Pr.in kg/cm2 (Min./Max./Normal) : 1 / 1 / 1 Temp. Deg.C : 65 Diffl. Pr. in kg/cm2 Sizing/Shut off : 2.6 / 6 Density/Comp. Factor/Mol wt : 1840 / -- / 98 Noise level to be less than 90dBA : Yes BODY Type of valve : Globe Single seat Body Size/Port size : 80mm / Mfr to furnish Guiding/No. of ports : Top / One End connection ANSI : 150# RF Body material : ALLOY 20 Bonnet Type (Std/Extd/Finned) : Std Packing material : Steel impregnated PTFE Trim form/Trim type : =% Trim material-plug with stem and seat : Alloy20+ Teflon insert Bonnet studs and nuts material : Alloy20 Gland follower,Stud, Flange material : Alloy20 Leakage class : VI Flow tending to : Open ACTUATOR: Actuator Type : Spring-Diaphragm Fail position : Close Handwheel/Location : Required / Side POSITIONER: Air Supply Pressure(Kg/cm2) : 4.0 Kg/cm2 signal : 4-20mA+HART Positioner Gauges : Required,Case SS304,white dial, Bourden SS316 ACCESSORIES: Air set : Required Pneumatic tubing size : 8mm.SS304 Support legs and lifting lugs shall be provided. Piping,fittings and accessories shall be constructed from SS304 and mounted on a SS304 back plate (panel) installed on the actuator. Painting shall be done as per fluid/standard. Serial Number should be punched on Valve Body.

CONTROL VALVE Tag Number : LCV6628/DCDA Plant Service : FAT Pump Tank Level Line Size/Schedule/Material : 80mm/Sch40/SS Fluid/State : Sulphuric Acid(98.4%)/Liquid Electrical Class : General PROCESS DATA: Flow in Kg/Hr (Min/Max/Nor.) : 600 / 7000 / 6000 Inlet Pr. in kg/cm2 (Min./Max./Normal) : - / 6 / 3.6 Outlet Pr.in kg/cm2 (Min./Max./Normal) : - / 2.3 / 2.3 Temp. Deg.C : 65 Diffl. Pr. in kg/cm2 Sizing/Shut off : 1.3 / 6 Density/Comp. Factor/Mol wt : 1840 / -- / 98 Noise level to be less than 90dBA : Yes BODY Type of valve : Globe Single seat Body Size/Poer size : 40mm / Mfr to furnish Guiding/No. of ports : Top / One End connection ANSI : 150# RF Body material : ALLOY 20 Bonnet Type (Std/Extd/Finned) : Std Packing material : Steel impregnated PTFE Trim Characteristics : =% Trim material-plug with stem and seat : Alloy20+ Teflon insert Bonnet studs and nuts material : Alloy20 Gland follower, Stud, Flange material : Alloy20 Leakage class : VI Flow tending to : Open ACTUATOR: Actuator Type : Spring-Diaphragm Fail position : Close Handwheel : Required / Side POSITIONER: Air Supply Pressure : 4.0 Kg/cm2 signal : 4-20mA+HART Positioner Gauges : Required,Case SS304,white dial, Bourden SS316 ACCESSORIES: Air Set : Required Pneumatic tubing size : 8mm.SS304 Support legs and lifting lugs shall be provided. Piping,fittings and accessories shall be constructed from SS304 and mounted on a SS304 back plate (panel) installed on the actuator. Painting shall be done as per fluid/standard. Serial Number should be punched on Valve Body.

Instrumentation Limited