Material Supply for Construction of Anganwadi

Amount

Stone for masonry work

Portland Cement

Coarse sand (zone III)

Stone Aggregate(single size):20 mm nominal size

Stone Aggregate(single size): 10 mm nominal size

Solid blocks of size 30x20x15cm

Solid blocks of size 30x20x20cm

Solid blocks of size 40x20x10cm

Anjili wood scantls

Flats up to 10 mm in thickness

Mild Steel round bar above 12 mm dia

Red oxide Zinc chromate primer

Rawl plug 50 mm (designation 10 nos)

Structural steel such as tees, angles, channels and R.S. joists

Adjustable telescopic prop 3 m (2.02-3.75m)

Beam clamp 300-380 mm (450-1070 mm)

Adjustable span ESO+SI (2.35-3.40)

Wall form panel 1250x450xmm

Corner angle 45x45x5 mm 2.50 long

Column clamp 450x1070 mm

Prop 2 m (2-3.5m)

Twisted steel/deformed bars

Fine sand (zone IV)

Stone Aggregate(single size): 40 mm nominal size

Vitrified floor tile 60x60 cm

Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades designs except White, Ivory, Fume Red Brown etc.

Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black

Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm

Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm

Bright finished or black enameled mild steel screws 40 mm

Bright finished or black enameled mild steel screws 20 mm

Anjili wood planks

Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm)

Pink primer (for wood)

Synthetic enamel paint in black or chocolate shade

35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished)

Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm

200 mm Aluminium aldrop

Iron hooks & eyes 100 mm

Oxidised mild steel tower bolt (barrel type) 250x10mm

Oxidised mild steel screws 30 mm

Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre

Plastic emulsion paint

wall form panel 1250x500 mm

Corner angle 45x45x5 mm 1.50 m long

100 mm channel shoulder 2.5 m long

Double clip (bridge clip)

Single clip

M.S. Tube 40 mm dia

Black plastic seat (soild) with lid C.P.brass hinges and rubber buffers

Vitreous china pedestal type wate closet

Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe)

Vitreous China flat back wash basin 630x450 mm

15 mm C.P.brass tap

C.P. brass waste 32 mm

C.I. bracket for wash basin and sinks

Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm

Rectangular shape 453x357 mm Mirror with Plastic moulded frame

Hard board 6 mm thick

Chromium plated Brass screws 25 mm

PTMT - Towel Rail (600 mm)

Second class teak wood in scantling

PTMT - Soap Dish/Holder 138x102x75 mm

PVC pipe 110 mm outer dia 6kgf/cm2

PVC pipe 75 mm outer dia 4 kgf/cm2

PVC pipe 32 mm outer dia. 10Kgf/cm2

PVC pipe 25 mm outer dia. 10kgf cm2

PVC vent cowl 75 mm dia

Polyethylene water storage tank with cover and suitable locking arrangemnet

Brass bib-cock-15 mm dia

Mild steel tubes hot finished welded type

Welding by electric plant

Cods Constructions (BID ID -2222375)