REPAIRS AND MAINTENANCE TO PERIMETER FENCING AT CENTRAL ZONE UNDER GE (NORTH) BINNAGURI

Amount

Dismantling post of struts (RCC) any section, including taking out embedded portion in concrete, brick work, masonery etc and making good the disturbed ground complete or all as specified and as directed

Dismantling post of struts ( RCC) any section, including taking out embedded portion in natural ground and making good disturbed ground complete all as specified and as directed.

Excavation in post holes in any type of soil each n.exc 0.5 cum, getting out to accommodate Steel fencing post by trimming/excavation complete and removing surplus soil to a distance not exceeding 50Mtr spread and leveled complete all as specified and as directed.

S&F for MS work like posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed.

M&L for Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips of Fe-410 -W (Gde E-250) quality A or Fe 290 ( Gde E-165) complete all as specified and as directed.

S&F galvanized. 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and galvanized coating of steel wire shall conform to the requirement as laid down for medium coated wire in IS 4826 and straining and fixing to any type of standard rails staining bolts, including securing or tying at crossings with and provision of galvanized mild steel pins etc including dismantling of barbed wire of any type and size complete all as specified and as directed.

Restraining & resecuring including making good staples etc of old barbed wire complete all as specified as directed.

Dismantling of chain link fencing of any type any size complete all as specified and as directed.

Supply only Chain link MS galvanized fencing, any size or type complete all as specified and as directed. Note: The size of Mesh shall be as directed by Engineer-in-Charge.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed

M&L for Plain Cement Concrete type C2 1:3:6 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

Demolition of concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Demolition of brick of built in cement mortar including all quoins, arches, pillars, etc, complete all as specified and as directed

M&L for Plain Cement Concrete type D2 1:4:8 (using 40 mm graded crushed stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed

Material and labour for brickwork with fly ash bricks, old size, having compressive strength not less than 75Kg sqcm, straight or curved on plan exc 6 M mean radius in built in cement and sand mortar 1:6 complete all as specified and as directed.

All as per item N0.15 but except bricks complete all as specified and as directed. Note: The brick work obtained from demolition shall be reused.

Material and labour for brickwork with fly ash bricks, old size, straight or curved on plan to any radius in half brick thick walls built in cement and sand mortar 1:4 complete all as specified and as directed.

Material and Labour for rendering 15 mm thick on fair faces of brick or concrete surfaces finishing surfaces fair and even without using extra cement in Cement mortar 1:6 complete all as specified and as directed.

M&L for Providing, cement concrete Type B1 1:2:4 using 20 mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered on edges cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

S&F for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n.exc 10 cm long complete all as specified and as directed.

M&L for preparation of new steel surfaces and applying two coat of synthetic enamel paint over a coat of red oxide primer exceeding 10cm in width or girth not otherwise described complete all as specified and as directed.

M&L for three coats of white wash on newly plastered/unplastered /concrete surfaces of wall/fencing posts including preparation of surface complete all as specified and as directed.

M&L for preparation of new steel surfaces and applying two coat of synthetic enamel paint over a coat of red oxide, primer not exceeding 10cm in width or girth not otherwise described complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

M&L for rolled mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

M/S VIRENDRA KUMAR SINGH

SG ENTERPRISE

M/s. MD IRSHAD

samrat saw mill and joinery workshop

SINGH & CO

M/S MAJUMDER CONSTRUCTION

BIG BEN ENTERPRISES