Re-routing of High mast lighting tower and removing of existing electrical poles which are hindrance to the proposed M/s. GAIL pipe line

Amount

Excavation of pit/trench of required width and depth for miscellaneous works like re-routing of cables, erection barricading poles laying of HDPE / GI Pipes etc. and refilling, making the surface good to match the with surroundings including removal of debris complete as directed by Engineer in charge with all labour and tools. Hard/dense soil.

Supply and fabrication of steel by using suitable flats, angles, channels of required sizes to provide required cross arms, back clamps, support clamps, frames, GI bend pipe for street light fittings including cutting, bolting, riveting, drilling, welding etc. including providing one coat of zinc rich epoxy paint primer complete as directed by Engineer in charge.

Supply and providing of P.C.C. 1:3:6 with 20 mm graded granite as coarse aggregate and river sand as fine aggregate (220 Kgs of cement per M3 of finished concrete) including mixing, depositing in position, tamping, finishing and curing for base concreting etc. as directed by engineer in charge including all labour and tools.

Fixing Testing and commissioning of street light luminaires to the pole with 3 core x1.5 sq.mm control cable as directed by Engr. I/c complete with all labour tools and tackles . Make of the cable : Torrent / Universal / Unicab / Havells / KEI/ Polycab / Gloster /orbit/ KSP/ Paragon/ RR Kabel/ RPG Note: Street light luminaires will be supplied by VPA

Transportation Drawing / Clamping of existing 3 ½ Core, 120 Sq.mm aluminum conductor cable through existing HDPE/pipe/ complete as directed by engineer in charge including all labour, tools and tackles. (Cable will be supplied by VPT at free of cost)

Removing of 3 phase 4 wire over head line on the insulators as directed by engineer in charge. Note: 1 rkm = 4 runs of 1 km long.

Dismantling, removing of existing 30 Mtr. High mast from existing RCC foundation with all accessories and duly removing lantern carriage & head frame assembly with all accessories on the mast including wire ropes, cables, luminaries, control gear boxes etc., without damage to the material and providing a crane assistance, including transportation, loading and un-loading labour, tools and tackles as directed by Engineer -incharge

Transportation, erection & commissioning of the 30 Mtr. High mast on existing RCC foundation with all accessories and duly assembly fixing and commissioning of lantern carriages and head frame assembly with all accessories on the mast including wire ropes, cables, luminaries etc., and providing suitable 30/40 Ton carne assistance, including transportation, loading and un-loading labour, tools and tackles as directed by Engineer -incharge

Providing of suitable shallow foundation as per the drawing with 1:2:4 concrete for high mast considering the sage soil bearing capacity at site as 5 T/ Sq.Mtr. with all materials and labour in including excavation as directed by Engineer –incharge.

Providing of set of foundation bolts in the existing shallow foundation for the above 30 Mtrs. high mast manufactured from special stainless steel along with nuts, washers, anchor plates, templates etc. as directed by Engineer –incharge including all labour, tools and tackles.

Supply and laying of 120 mm dia HDPE pipe in the existing trench with all materials labour tools and tackles as directed by Engineer in charge. MAKE: TULASI / SUDHAKAR / NANDI / KSP.

Supply & Providing, earth station using 3 meters long, 40 mm medium grade G.I. pipe conforming to IS 3043 with enclosure duly filling with alternate layers of salt and charcoal complete with GI funnel and covering with PCC cover as directed by engineer in charge including all labour and material.

Supply and laying 25 mm X 5 mm G.I strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) as directed by engineer in charge.

Supply of 3 ½ C x 120 Sq.mm LT cable 1.1 KV, , PVC sheathed armored aluminum conductor cable of approved brand and conforming to IS 7098 (Part I. complete as directed by Engineer-in-charge including all materials labour, tools and tackles. BRANDS: UNIVERSAL / UNICAB / GLOSTER / FINECAB / POLYCAB / KEI / RPG / FINOLEX / HAVELLS / V- GUARD / GLOSTER.

M/s D ARJUNA RAO (BID ID -824080)

N.V.K ELECTRICALS (BID ID -824616)

SRI SAI KRISHNA ELECTRICAL WORKS (BID ID -824409)