Construction of internal Street and New Footpath/restrengthening with Precast R.C.C Pardi, CC Kerb stone & Rubber moulded Paver Block, Kota Stone on T.P. roads of subzone-5 area in South West (Athwa) Zone.

Name Of Work :- Construction of Internal Street and New Footpath / Restrngthing with Precast R.C.C Pardi, CC Kerb

stone & Rubber moulded Paver Block, Kota Stone on T.P.Roads of subzone-5 area in South West (Athwa) Zone.

PARTICULARS Quantity GST & Unit

Excavating the road surface upto required depth including

removing the excavated materials and depositing on the

road side upto 50 mt. lead etc. complete. Including labour,

1 machinery & equipments require to complete this item and 600.00 109.41 C.M.

as detailed in tender specification & as directed by

engineer in charge.

Dismantling of structures of roadways, including disposing

off unserviceable material free of cost which will be the

owenrship of contractor or as directed by the Engineer

2 with all leads and lift etc. Including labour, machinery &

equipments required to complete this item etc.

(A) R.C.C. Pardi 30.00 1110.75 C.M.

(B) Removing existing Kotah Stone/Paver Block 1250.00 50.11 S.M.

(C) Brick / Stone Masonary 30.00 577.92 C.M.

(D) Plain concrete 15.00 639.72 C.M.

(E) Bituminious Pavement 30.00 288.65 C.M.

(F) Non Bituminious Pavement 40.00 155.25 C.M.

Preparation of Subgrade with compacting. levelling and

consolidation of subgrade with mini roller/plate vibrator

machine including watering and filling in depression

3 which occur during the process. including 2500.00 5.03 S.M.

labour,machinery, equipments required to execute this

item etc. complete as detailed in tender specification & as

directed by engineer in charge.

Providing and laying Cement Concrete 1:5:10 (1 cement :

5 coarse sand : 10 graded stone aggregate of 20 mm

nominal size) and curing complete excluding cost of form

4 work and reinforcement for reinforced concrete in vertical 300.00 2606.92 C.M.

and horizontal fins upto floor two including

labour,machinery, equipments required to execute this

item etc. complete.

Supplying and filling fine sand (Pana/Stone Dust/Crush

sand) in 25/75 mm (Avg.) compacted thickness over the

base including necessary compaction, watering etc.

complete. item includes levelling by using mini rollar/plat

vibrator machine and as per details in tender specification

& as directed by engineer in charge.

PARTICULARS Quantity GST & Unit

Providing 100 mm thick readymade C.C. kerb of strength

M20 (Size 300 x 380 mm) purchased from S.M.C.'s

approved paver block manufacturer and setting in line,

level and in truly vertical position, including filling joints

10mm width in C.M. 1:1 (1 Part of cement 1 part of coarse

sand) smooth pointing in C.M. 1:1 (1 Part of cement :

6 Part of stone dust) including watering, test required to be

carriedout etc. complete and as directed by Engineer-in-

charge). including watering, labour, tests required to be

carried out, machinery, equipments required to execute

this item etc. complete.

A For regular edge of footpath 4000.00 228.00 R.M.

For roundling at the edge of footpath (For fanning portion)

Providing and fixing interlocking type Rubber Moulded

cement concrete paver block of approved shape, design

and colour having 60 mm thickness (M-35), purchased

from SMC's approved paverblock manufacture only and

7 fixing on fine sand bedding. Item includes levelling by

using plate vibrator compactor machine. Item also includes

all material colour, equipments, tools, plants, curing,

watering, cleaning, test required to be carriedout etc.

As per General Rate 528.00 524.00 S.M.

As per CE note no.:1910, 4.7.2022 (Max. usage 20% of

total requirement) Recycle Product produced by C&D 144.00 408.50 S.M.

waste project plant

B Without Colour

As per General Rate 2700.00 524.00 S.M.

As per CE note no.:1910, 4.7.2022 (Max. usage 20% of

total requirement) Recycle Product produced by C&D 700.00 376.25 S.M.

waste project plant

Providing and setting 50 to 60 mm thick rouge kotah stone

water table in line, level and in required gradient including

25 mm thick beddcing in C.M. 1:6 (1 Part of cement :

Part of coarse sand) with sufficient ramming consolidation.

Providing joints in C.M. 1:3 (1 Part of cement : 3 Part

8 coarse sand) and smooth pointing in C.M. 1:1 (1 Part of

Cement, 1 Part of coarse sand) including watering etc.

complete and as per details in tender specification & as

directed by engineer in charge.

B Size : 1' x 1'(40 to 50 mm thick) 0.00 125.88 R.M.

Providing and fixing in position readymade cement

concrete Water Drain Slab ( 300 x 300 x 80 mm ) M-30

9 Grade with all labour, material, testing charge etc. 750.00 189.00 R.M.

complete as per details in tender specification & as

directed by engineer in charge.

(A) Readymade water drain channel (600x300x100) 15.00 408.00 R.M.

PARTICULARS Quantity GST & Unit

Supplying and fixing RCC collar (300 mm dia) for tree

plantation including all taxes, carting, loading, unloading

10 etc.complete.with all labour, material charge etc. complete 7.00 60.00 Nos.

as per details in tender specification & as directed by

engineer in charge.

Tree guard ID 500mm,800 x 800 x 75 mm(Type D) ( set

Providing and applying two coats of synthetic enamel

11 paint including primer to kerb as per technical 350.00 90.00 S.M.

specifications and as directed by Engineer-in-charge.

Removing & resetting rough kotah stone paving for

footpath in line, level and in proper gradient including

mm thick bedding in

C.M. 1:6 ( 1 part of cement : 6 part of coarse sand) with

12 sufficient ramming consolidation. Providing joints in C.M. 1250.00 155.51 S.M.

1:3 ( 1 partof cement : 3 part of coarse sand) and smooth

pointing in C.M. 1:1 (1 part of cement : 1 part of coarse

sand) including watering etc. complete and as directed by

Engineer in charg

Removing and resetting existing rough kotah stone water

table for footpath in line, level and proper gradient

including 25 mm thick bedding in CM 1:6 (1 Part of

Cement, 6 Part of coarse sand) with sufficient ramming,

13 consolidation, Providing joints in C.M. 1:3 (1 Cement : 3 125.00 63.89 R.M.

Coarse sand) and smooth pointing in C.M. 1:1 (1 Cement :

1 Coarse sand) including watering etc. complete as per

details in tender specification & as directed by engineer in

Removing and resetting Existing paver block, including all

watering leveling, cleaning, labour & Equipments chagres

etc. complete as per details in tender specification & as

directed by engineer in charge.

Excavation for 27 cm wide and 25 cm deep Gishi in

Ashpalt Bitumeneous road for erection of concrete wall as

a road devider and removal of all excavated materials /

14 asphalts etc. from the site as per details in tender 15.00 29.25 R.M.

specification & as directed by engineer in charge at the

cost of contractor.

Providing and laying cement concrete cast-in-situ/ Precast

kerb in M-20 grade as per drawing and as per details in

15 tender specification & as directed by engineer in charge

with all leads, lifts, loding & unloding etc. complete.

( i ) 775mm height cement concrete M-20 grade cast-in-

situ/Precast Kerbs & Fixing for Median as per drawing and

as per details in tender specification & as directed by

engineer in charge.

PARTICULARS Quantity GST & Unit

( ii ) 0.15 (th.) *0.30(l)* 0.48(Ht.) mt. in size cement

concrete M-20 grade pre cast Kerbs & Fixing as per

drawing Purchsed from SMC's approved manufactures and 100.00 380.00 R.M.

as per details in tender specification & as directed by

engineer in charge.

Removing & Resetting existing ready made C.C.Kerb of

strength of required size & thickness in line, level and

truly vertical position, including filling joints in C.M.1:1

16 (1part of cement 1part of coarse sand) smooth pointing in 50.00 56.00 R.M

C.M.1:1(1part of cement : 1 part of stone dust ) including

watering etc.complete as directed by engineer-in-charge.

Providing and laying cement concrete cast-in-situ Guard

Stone (1:2:4) (1 cement : 2 coarse sand : 4 graded stone

aggregate of 20 mm nominal size) including cost of form

17 work including, curing, labour,machinery, equipments 10.00 564.00 NO.

required to execute this item etc. complete. Size :- (750 X

Providing and laying cement concrete cast-in-situ Guard

Stone (1:1/2:3) (1 cement : 1/2 coarse sand : 3 graded

stoneaggregate of 20 mm nominal size) including cost of

18 form work including, curing labour,machinery, equipments 50.00 395.00 NO.

required toexecute this item etc. complete. Size :- (600 x

Providing and laying cement concrete 1:2:4 ( 1 part of

cement, 2 part of coarse sand, 4 part of graded stone

19 aggregate of 20 mm nominal size) in proper line and level 0.00 3741.69 C.M.

including compaction, curing form work but excluding

steel reinforcement etc. complete.

Providing and laying Granular Sub Base (drainage layer)

conforming to grading V of Table 400-1 of each layer not

exceeding 200mm thickmess and compacted thickness as

per design & drawing with specified graded stone metal

and sand mixed in pugmill and laid with mechanical

means spreading with motor grader and compacting with

20 vibratory roller having minimum 80-100 kN static weight 140.00 1488.88 C.M.

to achieve desired density of 98% of MDD including all

materials, labour, machinery,tests required to be carried

out with all leads and lifts etc., complete as per details in

tender specification & as directed by engineer in charge.

Painting two coats of enamel paint over priming coat

(including priming coat) after removing entire

whitewash/colourwash surface dirt, dust foreign

matter & also incl. preparing the surface even &

sand papered smooth etc. complete.

Painting two coats of enamel paint (Excluding priming

coat) over previously painted wall after removing entire

surface with even shade & surface after removing dirt, dust

foreign matter etc. comp.(M.R.)

PARTICULARS Quantity GST & Unit

Applying Priming coat over new steel and other metal

surface after over and including preparing the surface by

throughly cleaning oil, grease dirt and other foreign matter

and scoured with brushed fine steel wool, scrapers and

sand paper with ready mixed priming paint brushing red

Painting two coat (excluding priming coat) on new steel

and other metal surface with synthetic enemal paint,

burshing to give an even shade including cleaning the

surface of all dirt, dust and other foreign matters.

Painting one coat (excluding priming coat) on Previously

Painted steel and other metal surface with synthetic enemal

25 paint, burshing to give an even shade including cleaning 300.00 39.93 SM

the surface of all dirt, dust and other foreign matters.

Executive Engineer

South West (Athwa) Zone

Sign & Seal of Contractor Surat Municipal Corporation