Reconductoring -LT line with ABC at Mudavanmugal Transformer under Electrical Section Poojapura

Dismantling and reconnecting three phase service connection from the OH line incl.lowering down the WP portion

Dismantling 2 Line Spacer from existing OH line

Dismantling 3 Line Spacer from existing OH line

Insertion of one LT PSC pole in existing three phase OH line including digging & back filling pit in ordinary soil, fitting cross arm, insulator, binding etc. excluding transportation of poles.

Loading LT PSC pole from the stacking place and unloading the same at work site (transportation by any vehicle).

Fitting of one No. pole top service connection box of standard size (up to 4 way) using ss strap/B&N of suitable size in to the PSC/A poles at the standard height excluding giving connections

Fitting one additional Fuse unit and giving connection from Transformer to fuse and Distribution box to LT OH line.

Dismantling and reconnecting single phase service connection from the OH line incl. lowering down the WP portion.

Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 numbers of poles excluding loading& unloading.

Renewal of existing damaged/old LT PSC/RCC (three phase line) pole with new PSC pole in place and refitting of all items incl. Conveyance (except pole).

Renewal of existing damaged/old LT TW/RSJ/Rail (three phase line) pole with new PSC pole in place and refitting of all items incl. Conveyance (except pole).

Renewal of existing damaged/old LT PSC/RCC (single phase line) pole with new PSC pole in place and refitting of all items incl. Conveyance (except pole).

Insertion of one LT PSC pole in existing single phase OH line including digging & back filling pit , fitting cross arm, insulator, binding etc.

Renewal of existing damaged/old LT Strut with new PSC strut in place and refitting of all items incl. Conveyance (except pole).

Straightening one slanted LT pole after unbinding the line and rebinding the line after work.

Erecting one LT PSC Pole in position including digging & back filling pit .

Providing Stay for LT poles including digging & back filling pit.

Renewal of existing damaged/old LT stay with new stay in place and refitting of all items and conveyance of all materials.

Providing one Coil Earth using GI-earth wire , digging separate pit at standard distance away from the pole/structure & backfilling.

Installing One No. Insulation piercing connector of size Main :16 to 95 ,Tap:1.5 to 16 Sq.mm

Installation of Insulation piercing connector for main to service line main :16-95 sqmm, Tap 16-95 sqmm

Installing One No. 4 way Satellite Connector of size Main :16 to 95, Tap:4 to 35 Sq.mm to the LT AB cable of Standard size

Transporting LT ABC by hired vehicle to a distance up to 5 km and carring up to 2 drum including loading and un loading using crane

Stringing of 1.1 kV Aerial bunched cable of size 3 x 70 + 1 x 16+1x 50 sqmm with bare/insulated Messenger through existing poles

Erection of Anchor clamp / dead end clamp for LT ABC of any size

Providing Cable Tie

Providing End Caps

Erection of suspension clamp for LT ABC of any size

Installation of Pre-insulated straight through joints for 16sqmm cable

Installation of Pre-insulated straight through joints for 70sqmm cable

Dismantling (without damage) one km LT three phase 4 wire OH line ,cross arms, insulators and stacking the conductors in rolls .

Dismantling (without damage) one km LT additional conductor line , cross arms, insulators and stacking the conductors in rolls.

Dismantling (without damage) one km LT single phase 2 wire OH line , cross arms, insulators and stacking the conductors in rolls .

Dismantling (without damage) one 11kV PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Dismantling (withoutdamage) one km 11kV line (3 conductors), cross arm, insulators, disc, rolling the conductor and stacking.

Insertion of one HT PSC pole in existing line incl. digging & backfilling pit, fitting cross arm, insulators, binding etc.

Cutting trees beyond 60cm but upto and incl. 120cm girth, cutting of trunks/branches, removing the root completely and stacking.

Fitting and providing one HT Stay for 11kV pole incl. digging & back filling pit.

Fitting one set AB switch and giving connection

Fitting one Additional 2.4m/3m Channel cross arm (75x40x6mm), in existing 11kV DP incl. conveyance of materials.

Providing one Coil Earth using GI earth wire, digging separate pit at standard distance away from the pole/structure & backfilling.

Please Enable Macros to View BoQ information