Loading
Loading…
Loading…
Tender Value
₹7.2 L
EMD Value
₹14,500
Closing Date
30 May 2026, 3:00 pmClosed
Executive Engineer PWD RNB DH PORA
Executive Engineer PWD RNB DH PORA
chain link fencing including installation of iron gate at FPN Gandwani
2026_PWDJK_310180_1
12 Of RnB/D.H. Pora/2026-27/918-26 Dtd. 18/05/2026
Open Tender
Civil Works
Percentage
60 days
Executive Engineer PWD RNB DH PORA
Please refer Tender documents.
5 documents required · 5 mandatory
₹300
MH 0059
₹14,500
18 May 2026
18 May 2026
1 Jun 2026
19 May 2026
30 May 2026
19 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation of all kinds of soil by Manual means in trenches for foundations (not exceeding 1.5 m in width) and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms, all lifts including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: | - | Cum | 0.6 | - |
| 2 | Providing and laying stone soling duly hand packed in maintaning level and section including ramming and carriage of the same up to site of work complete. | 1 | Cum | 0.8 | ₹0.8 |
| 3 | Providing and laying in position cement concrete 1:4:8 (1
Cement:4 Corase sand: 8 graded stone aggregate 40 mm
nominal size ) including curing but excluding the
cost of centring and shuttering. All work upto plinth level | - | Cum | 0.4 | - |
| 4 | Providing and laying in position cement concrete 1:2:4 (1
Cement:2 Corase sand: 4 grade stone aggregate 20 mm
nominal size ) including curing but excluding the
cost of centring and shuttering. All work upto plinth level | 1 | Cum | 0.2 | ₹0.2 |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns | - | sqm | 0.6 | - |
| 6Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50X50 mm made of G.I. wire of dia 4 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge including applying a primming coat of approved steel primer and two or more coats of paint complete | |||||
| 7 | Structural steel work in built up sections and framed work including cutting, welding, hoisting,errecting, fixing in position and applying a priming coat of approved steel primer with two or more coats of paint etc complete. | 0.8 | kg | 0.6 | ₹0.48 |
| 8 | providing and fixing of iron gate made out of angle iron, flat iron, iron hallow sections of requried size and gauge including cutting, welding and fixing in position with locking arrangements etc including applying a primming coat of approved steel primer and two or more coats of paint complete | - | kg | 0.2 | - |
| 9Manufacturing supplying and fixing retro reflective sign boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type-IV of ASTM-D-4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC : 67-2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminum alloy rivets @ 20cm c/c to back support frame of M.S. angle iron of size 25 x 25 x 3 mm along with theft resistant measures mounted and fixed with 2 nos. M.S. angles of size 35x35x5mm to a vertical post made upto M.S. Tee section ISMT 50x50x6mm welded with base plate of size 100x100x5mm at the bottom end and including making holes in pipes, angle flats, providing and fixing M.S. message plate of required size steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical M.S.-Tee support to be painted in black and white colours). Backside of aluminum sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coats including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge. | |||||
| 9.01 | Mandatory/Regulatory sign boards of 900 mm diameter with
part as length of 3750 mm. | - | No | 0.8 | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.48 MB
BOQ_1003710.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .