Construction of new office building, compound wall, security cabin, TC plinth and parking shed for Lalpur Sub-Division under Jamnagar Circle

NAME OF WORK : Construction of new office building, compound wall, security cabin, TC plinth and parking

shed for Lalpur Sub-Division under Jamnagar Circle

SR NO. ITEM QTY PER RATE AMOUNT

1 Excavation for foundation up to 1.5M depth

including sorting out and stacking of useful

materials and disposing of the excavated stuff

upto 50M. Lead. (B)Loose or soft soil. 40.00 Cu.M. 124.61

2 Excavation for foundation up to 1.5M depth

including sorting out and stacking of useful

materials and disposing of the excavated stuff

upto 50M. Lead. (B)Dense or hard soil. 80.00 Cu.M. 159.48

3 Excavation for foundation up to 1.5M depth

including sorting out and stacking of useful

materials and disposing of the excavated stuff

upto 50M. Lead. (D)Soft rock not requiring

blasting. 80.00 Cu.M. 281.87

4 Excavation for foundation up to 1.5M depth

including sorting out and stacking of useful

materials and disposing of the excavated stuff

upto 50M. Lead. (D)Hard rock 100.00 Cu.M. 636.06

5 Excavation for foundation up to 1.5M to 3.0M.

depth including sorting out and stacking of useful

materials and disposing of the excavated stuff

upto 50M. Lead. (D)Soft rock not requiring

blasting. 60.00 Cu.M. 305.98

6 Excavation for foundation up to 1.5M to 3.0M.

depth including sorting out and stacking of useful

materials and disposing of the excavated stuff

upto 50M. Lead. (D)Hard rock 40.00 Cu.M. 660.16

7 Providing and laying cement concrete 1:2:4 (1-

Cement : 2- Coarse sand : 4- graded stone

aggregates 20 mm nominal size) and curing

complete excluding cost of formwork in (A)

Foundation and Plinth 65.00 Cu.M. 3765.41

8 Providing and laying cement concrete 1:3:6 ( 1-

Cement : 3-Coarse sand : 6-Hand broken stone

aggregate 40MM nominal size ) and curing

complete excluding cost of formwork in (A)

Foundation and plinth. 65.00 Cu.M. 3075.91

9 Filling available excavated earth ( excluding rock )

in trenches, plinth, sides of foundation etc. in

layers not exceeding 20 cm. in depth consolidating

each deposited layer by ramming and watering.

10 Filling in foundation and plinth with murrum or

selected soil in layers of 20cm. thickness including

watering, ramming and consolidating etc.

11 Brick work using common burnt clay building

bricks having crushing strength not less than

kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:6 (1- Cement : 6 -fine sand)(C) Fly Ash

SR NO. ITEM QTY PER RATE AMOUNT

12 Brick work using common burnt clay building

bricks having crushing strength not less than

kg./Sq.Cm. in Super structure in Cement Mortar

1:6 (1- Cement : 6 -fine sand)(C) Fly Ash Bricks

13 Brick work using common burnt clay building

bricks having crushing strength not less than

kg./Sq.Cm. at first floor in Cement Mortar 1:6 (1-

Cement : 6 -fine sand)(C) Fly Ash Bricks

14 (i) Half brick masonry in common brunt clay

building bricks having crushing strength not less

than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1-

Cement : 4 -coarse sand ) in Super structure (C)Fly

15 Providing and laying controlled cement concrete

M-250 and curing complete including the cost of

form work but excluding the cost of reinforcement

for reinforced concrete work in [A] Foundation,

footings, Base of columns and Mass concrete.

16 Providing and laying controlled cement concrete

M-250 and curing complete including the cost of

form work and excluding reinforcement for R.C.C

work in [D] Columns. 29.00 Cu.M. 8892.28

17 Providing and laying controlled cement concrete

M-250 and curing complete including the cost of

form work and excluding reinforcement for R.C.C

work in [D] Columns. At first floor

18 Providing and laying controlled cement concrete

M-250 and curing complete including the cost of

form work and excluding reinforcement for R.C.C

work in [C] Beams GF 69.00 Cu.M. 6918.65

19 Providing and laying controlled cement concrete

M-250 and curing complete including the cost of

form work and excluding reinforcement for R.C.C

work in [C] Beams.at first floor

20 Providing and laying controlled cement concrete

M-250 and curing complete including the cost of

form work but excluding the cost of

reinforcement for reinforced concrete work in

Copings upto floor two level. 9.00 Cu.M. 5877.35

21 Providing and laying controlled cement concrete

M-250 and curing complete including the cost of

form work but excluding the cost of

reinforcement for reinforced concrete work in

Chajjas. 2.00 Cu.M. 7335.17

SR NO. ITEM QTY PER RATE AMOUNT

22 Providing and laying controlled cement concrete

M-250 and curing complete including the cost of

form work but excluding the cost of

reinforcement for reinforced concrete work in

Staircase. 3.00 Cu.M. 7363.66

23 Providing and laying controlled cement concrete

M-250 and curing complete including the cost of

form work but excluding the cost of

reinforcement for reinforced concrete work in

SLAB - GF. 37.00 Cu.M. 7302.89

24 Providing and laying controlled cement concrete

M-250 and curing complete including the cost of

form work but excluding the cost of

reinforcement for reinforced concrete work in

SLAB. At first floor 15.00 Cu.M. 7344.05

25 Providing Thermo Mechanically treated bar F.E.

500 Steel reinforcement as per I.S. Standard for

R.C.C work including bending, binding and placing

in position complete upto floor two level.

26 Providing Thermo Mechanically treated bar F.E.

500 Steel reinforcement as per I.S. Standard for

R.C.C work including bending, binding and placing

in position complete upto floor two level.at first

27 Providing 15MM thick cement plaster in single

coat on Brick/concrete walls for interior plastering

upto floor two level finished even and smooth in

Cement Mortar 1:3 ( 1-Cement :3-Sand ) for walls.

28 Providing 15MM thick cement plaster in single

coat on Brick/concrete walls for interior plastering

upto floor two level finished even and smooth in

Cement Mortar 1:3 ( 1-Cement :3-Sand ) for

walls.at first floor

29 Providing 10MM thick cement plaster in single

coat on Brick/concrete walls for interior plastering

upto floor two level finished even and smooth in

Cement Mortar 1:3 ( 1-Cement :3-Sand ) for

SR NO. ITEM QTY PER RATE AMOUNT

30 Providing 10MM thick cement plaster in single

coat on Brick/concrete walls for interior plastering

upto floor two level finished even and smooth in

Cement Mortar 1:3 ( 1-Cement :3-Sand ) for

ceilling at first floor

31 20MM thick sand faced cement plaster on walls

upto height 10meters above ground level

consisting of 12MM thick backing coat of Cement

Mortar 1:3 ( 1-Cement : 3-Sand ) and 8MM thick

finishing coat of Cement Mortar 1:1 ( 1-Cement : 1-

Sand ) etc. complete. 1570.00 Sq.M. 320.01

32 Providing cement vata ( 10Cm x10Cm ) size

quarter round in cement concrete in C.M. 1:1

including neat cement finishing, watering etc.

33 Providing and laying 24"x24" Vitrified 8mm thick

double charge tiles in flooring and skirting over

20mm (average) base of cement mortar 1:6 ( 1-

Cement : 6-Coarse sand ) on new surface or fixing

on existing flooring by adhesive material including

5mm groove filled with epoxy including finished

with flush pointing and cleaning the surface etc

complete, for Light Shade as directed by EIC.

34 Providing and laying coloured glazed tiles of he

size 300mm x 200mm x 8mm / 300mm x 450mm x

8mm in floring, skirting, risers of steps and dedo

on 10mm thick cement plaster 1:3 (1-Cement : 3-

Coarse sand) & jointed with white cement slurry.

35 Providing and layin 25MM thick Kotah stone slab

flooring over 20MM (average) thick base of

Cement Mortar 1:6 ( 1-Cement : 6-Coarse sand )

or lime mortar 1:1.5 laid over and jointed with

grey cement slurry including rubbing etc

complete. [A] 25MM thick as directed by EIC.

36 Providing and laying 20 to 25MM thick, both faces

mirror polished Kotah stone with all edges

machine cut, 450mm to 600mm width and of

required length (only one piece to be used) of

approved quality for cup board shelves, wall

partition etc. including fixing the same in

masonary wall by cement mortar in three sides

including curing etc. complete as directed by EIC.

SR NO. ITEM QTY PER RATE AMOUNT

37 Providing and laying 25 mm thick granite slab

(18mm thick) flooring over 20 mm. (average thick

base of cement mortar 1:6 (1 cement : 6 coarse

sand ) of L.M. 1:1.5 and laid over and jointed with

grey cement slurry including rubbing and polishing

complete. 113.00 Sq.M. 2981.00

38 Providing and laying broken China Mosaic Flooring

for terrace using 12mm to 20mm broken pieces of

glazed tiles to be laid over cement mortar 1:3 to

plain or slope and to be tempered to bring mortar

crème out upto surface using white cement

including rounding off junctions and extending

them up to 15cm along the wall, clearing with

water and oxalic acid etc. as directed by EIC.

39 Wall painting (two coats) with plastic emulsion

paint of approved brand and manufacture on

undecorated wall surface to give an even shade

including throughly brushing the surface free from

mortar droppings and other foreign matter and

sand papered smooth with two coats of putty and

40 Wall painting (two coats) with plastic emulsion

paint of approved brand and manufacture on

undecorated Celling surface to give an even shade

including throughly brushing the surface free from

mortar droppings and other foreign matter and

sand papered smooth with two coats of putty and

41 Providing and applying 1 coat of approved make of

cement primer paint including scaffolding

watering etc. complete as directed by EIC.

42 Finishing wall with weather proof exterior

emulsion paint on wall surface (two coats) to give

an required shape even shade after thorughly

brushing the surface to remove all dirt and

remains of loose powdered materials etc.

complete 1570.00 Sq.M. 120.93

43 Providing and fixing MS grills or required pattern

to frames of windows etc. with MS flats at

required spacing and frame all round square or

round bars with round headed bolts and nuts or

by screws/welding with three coats of oil paint

including a priming coat etc complete as directed

by EIC. [A] Plain grill. 690.00 Kg 116.22

SR NO. ITEM QTY PER RATE AMOUNT

44 Providing and fixing 50MM Stainless steel pipe

hand railing for staircase with necessary Balusters,

Vertical pipes of required diameter fixing the

same by airldite necessary welding etc as directed

by EIC. 13.00 Rmt 2980.00

45 Providing, & fixing hot pressed phenol bonded,

exterior type solid flush door 35mm shutter made

by approved brand & as per I.S.I. standard with

water resisting plywood facing and 1mm thick

laminated sheet on both side of door. If necessary

with glass looking window with T.W. batten and

polishing /Colour .Rates are without fixtures &

fastening but with 3 NO. of 100mm. long butt or

parliamentary hinges on each flap of double

shutter & 150mm. long hinges for single shutter

and 3 NO. of M.S. flat hold fast grouted in C.C.

(1:2:4) on each side of frame, 3 coats of oil

painting of approved shades make etc., complete

as per drawing & as directed by E.I.C.

46 Providing and fixing Solid PVC Flush Door Shutters

24mm thick made fro Co- Extruded THREE LAYER

RIGID PVC Foam Sheet (Single extruded) with

density not less than 600 Kg / cbm. Outer Layer

(0.8-1mm) thick should be of Rigid PVC with

Density not less than 1400 kg/cbm including

Providing & Fixing WPC Door Frame Uperline Patti

of 24mm x 6mm Size. Door should be Water

proof, Termite proof, Fire Retardant & having

good screw holding capacity. Providing & Fixing

100% Solid Wood Plastic Composit (WPC) Door

Frame 90mm x 45mm made from Wood Plastic

Composite (Single extruded Process) material with

dencity 780kg / cbm All as per specifications &

drawings etc. complete as per direction of

Engineer-in-charge.

47 Providing and fixing fully glazed door upto 7 feet

height with top 2.5 feet panelled with

intermediate glasing of 6mm thick glass, pannel

should be made up of sandwitch type partition

made up of 18mm thick ply of 600x600mm grid

with 6mm ply on either side laminated with 1mm

thick sunmica side pannels is partly fixed inframe

with froasted glassing 8mm thick where as

openable portion 12mm toughned froasted glass

with frame work at top and bottom floor spring of

Ozone make with appropriate capacity SS glass

handle 24"x35mm long brush finish etc.

SR NO. ITEM QTY PER RATE AMOUNT

48 Providing and fixing window having extruded

aluminum Colour anodized section frame main

outer size 95mm x 24mm x 1.17mm @ wt.of

0.738 Kg/mt , horizontal Three track member size

vertical member of size 92mm x 31.75mm x

1.50mm @ Wt. 1.06 Kg/mt with sliding shutters of

horizontal membersize 40 mmx18mm x1.29mm @

wt.of 0.456 Kg/mt, vertical member of size 40mm

x 18mm x 1.29 mm @ wt.of 0.456Kg/mt/ wirh

mosquito net With good quality as directed by EIC

shutter of same size to be fixed in Three track with

5 mm thick transparent bronze colour tinted float

glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing

to frame as per details etc_Alluminium windows

Three track wirh Mosquito Net

49 Providing and fixing standared extruded of

alluminium section of size 63mm x 38.10mm x

1.2mm (Jindal Section :2434, @ Wt. 0.643 kg per

mt with colour Powder Coated alluminium frame

for ventilation with 5 mm thick frosted glass as

details etc complete for Ventilation 1.50 Sq.M 1163.92

50 Providing and Fixing Decorative laminated sheet

of 1 mm on 6 mm plywood to be fixed on new

wooden laminated partition with necessary frame

from 18mm plywood including cutting, and

pasting without damaging existing wooden

laminated partition with providing and fixing

mm glass on opening to be fixed and cleaning

with all labours and material complete as directed

by Engineer in charge.

51 Providing and fixing rolling shutters of approved

make made of 80MM wide M.S. laths inter-locked

together thorough their entire length and jointed

together at the ends by end locks mounted on

specially designed pipe shaft with bracket plates,

guide channels and arrangements for inside and

outside locking with push-pull operation with gear

system including the cost of hood cover and spring

etc. complete, of approved guage by EIC. [A]

Shutters having width below 3.5M.

52 Providing erecting fixing double coated Syntex of

Equivalent PVC ( ISI ) mark Water tank of required

capacity each with all necessary fittings and

connection etc complete on terrace as directed by

EIC. 2000.00 Per Ltr. 3.91

SR NO. ITEM QTY PER RATE AMOUNT

53 Providing,layng and jointing in true line and level

U.P.V.C pipe line including fitting of PRINCE/

SUPREME/ ASTRAL/ FINOLEX or equivalent or as

approved by Engineer in charge. Pipe shall be

fixed on the wall with the help of clamp at every

two meter c/c or shall be concealed as directed

including necessary fittings etc. Including testing

of ppe and joints and fixing the same with

adhesive solvent, Including cost of all materal (A)

15mm 20.00 Meter 71.93

54 Providing,layng and jointing in true line and level

U.P.V.C pipe line including fitting of PINCE/

SUPREME/ ASTRAL/ FINOLEX or equivalent or as

approved by Engineer in charge. Pipe shall be

fixed on the wall with the help of clamp at every

two meter c/c or shall be concealed as directed

including necessary fittings etc. Including testing

of ppe and joints and fixing the same with

adhesive solvent, Including cost of all materal (A)

25mm 40.00 Meter 90.93

55 Providing,layng and jointing in true line and level

U.P.V.C pipe line including fitting of PRINCE/

SUPREME/ ASTRAL/ FINOLEX or equivalent or as

approved by Engineer in charge. Pipe shall be

fixed on the wall with the help of clamp at every

two meter c/c or shall be concealed as directed

including necessary fittings etc. Including testing

of ppe and joints and fixing the same with

adhesive solvent, Including cost of all materal (A)

56 Providing,layng and jointing in true line and level

U.P.V.C pipe line including fitting of PRINCE/

SUPREME/ ASTRAL/ FINOLEX or equivalent or as

approved by Engineer in charge. Pipe shall be

fixed on the wall with the help of clamp at every

two meter c/c or shall be concealed as directed

including necessary fittings etc. Including testing

of ppe and joints and fixing the same with

adhesive solvent, Including cost of all materal (A)

57 Providing & fixing to wall, ceilling, flooring plumb

by means of GI clamps of 18 gauge sheet with 1 to

1.5 mtrs. Distance 10 Kg.F /cm2 working pressure

PVC pipes incl. joining with approved solution & all

fittings like bend, tee. Y bend plug bend with

water tight joints( Finolex or equivalent )for soil

waste & ventilating pipes etc. of the following

outside dia. Low density complete with necessary

fittings, wall clamps etc. including making groove

in the wall ,ceiling & floor -75 mm dia

SR NO. ITEM QTY PER RATE AMOUNT

58 Providing & fixing to wall, ceilling, flooring plumb

by means of GI clamps of 18 gauge sheet with 1 to

1.5 mtrs. Distance 10 Kg.F /cm2 working pressure

PVC pipes incl. joining with approved solution & all

fittings like bend, tee. Y bend plug bend with

water tight joints( Finolex or equivalent )for soil

waste & ventilating pipes etc. of the following

outside dia. Low density complete with necessary

fittings, wall clamps etc. including making groove

in the wall ,ceiling & floor - 90 mm dia

59 Providing, laying and jointing in true line and level

110 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming

to ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on

wall using of PVC clamp of the size 110 mm

diametre x 149 mm length x 145 mm heigh at

every 2000 mm center to center or shall be

concealed in walls as directed including necessary

fittings such as bends, shoes etc. including testing

of pipes and joints and jointed with adhesive

solvent cement including cost of all materials.

60 Providing, laying and jointing in true line and level

160 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming

to ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on

wall using of PVC clamp of the size 160 mm

diametre x 210 mm length x 196 mm heigh at

every 2000 mm center to center or shall be

concealed in walls as directed including necessary

fittings such as bends, shoes etc. including testing

of pipes and joints and jointed with adhesive

solvent cement including cost of all materials.

61 Providing & Fixing EUROPEOUN W.C with PVC

Flush Tank, Soft close Seat Cover, health faucet

(ABS body) & intergal "S" Trap including Jointing

the Trap with Pan and Soil pipe. Wall hung shall be

fixed on S.S heavy duty rack bolt having 16mm dia,

165mm length using Plastic sleeve Make by Using

Drill Bitt Only. Rate are inclusive of all matreials,

Labour & Necessary Fittings etc. Complete as per

Detailed Drawings, Specifications and as per the

Instruction of Engineer In charge. Make of Wall

Hung, faucet, Flush Tank and other accesories

Shall be Johnson, Hindware, CERA, Jaquar or

SR NO. ITEM QTY PER RATE AMOUNT

62 Providing and fixing Urinal of approved quality

including connecting the Urinal with waste pipe,

tap etc complete. [A] squatting plate pattern

white earthenware 550MMx300MM..

63 Providing and fixing wash basin wall Mounted or

Table Top of make

varmora/hindware/jaquar/simpolo or equivalent

Brand or of approved quality with single hole for

pillar tap with shanks and back nuts with C.I. or

M.S. Brackets painted white paint including

cutting holes and making good the same including

C.P. brass for waste and waste Pipes. washbasin

600 x 450 mm. Size with pillar cock of above make

as approved by EIC

64 P&F sink with CI or M.S brackets painted white

including cutting holes iin walls and making good

the same but excuding fittings. Vitreous china sink

65 Providing and fixing S.W Gully trap with C.I Grating

brick masonary chamber and water tight C.I cover

with frame of 300MM x 300MM size (inside) with

standard weight. [I] Square mouth traps. [B]

150MM x 100MM size 'P' or 'R' type.

66 Providing and fixing Bib Cock of 25mm Jaquar or

equivalent brand with necessary other materials

and piping connections for bathroom etc.

complete or as directed. 6.00 No 1897.50

67 Providing & Fixing 15mm C.P. Angle stop cock

Heavy duty with cap. Rate are inclusive of all

matreials, Labour & Necessary Fittings etc.

Complete. 6.00 No 521.00

68 Providing and fixing Gun metal check or non-

return full-way wheel valve. [D] 32MM dia.

69 Providing and fixing PVC SWR Nahni trap IS

for drain - 100 mm diameter with jali of the

following nominal diameter of self cleansing

design with C.I scread down or hinged grating

including the cost of cutting and making good the

walls. 10.00 No 594.29

SR NO. ITEM QTY PER RATE AMOUNT

70 Construction of brick masonary chamber for

underground C.I. inspection chamber and beds

with bricks having crushing strength not less than

35kg cm2 in C.M. 1:5 C.I cover with frame (light

duty)455mmx610mm internal dimension total

weight of cover with frame to be not less than 38k

(wt. of cover 23kg) and with frame 15kg. RCC top

slab with 1:2:4 mix (1-cement 2-coarse sand 4-

graded stone aggreate 20mm size) foundation

concrete 1:5:10 inside plaster 15mm thisck with

cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concerete

etc complete (i) inside dim 455mmx610mm and

450mm deep for singlr pipe line

71 Providing and fixing 600 x 450mm bevelled edge

mirror of superior glass mounted on wall by SS

stud of appropriate size as directed by EIC.

72 Providing and fixing of ISI approved quality

Hydraulic door closer as directed. 4.00 No 1050.00

73 Providing and fixing C.P Brass towel rail complete

with C.P Brass brackets fixed to wooden plugs

with C.P Brass screws. [B] 600MM X 20MM size.

74 Providing and fixing steel soap container with

screws etc complete. 3.00 No 300.00

Supplying and fixing to doors, windows,

ventilators, cup-boards following fixtures and

fastenings of approved quality with wooden or

metal screws, nuts and bolts as directed or as per

drawing and specifications etc. complete as

directed by EIC.

75 Flat Latch ( Aluminium ) - 250 MM long. 15.00 No 100.00

76 Handle ( Aluminium ) - 150MM long. 30.00 No 80.00

77 Door Stopper ( Brass ) - 150MM long. 15.00 No 150.00

78 Tower Bolt ( Stainless steel ) - 150MM long. 15.00 No 80.00

79 S.S best Chromium plated Aldrop - 14MM dia. &

80 Providing & Fixing SIGN BOARD having size

2000X1000mm for Sub-division made from

guage M.S Sheet having frame work of 35X35X3

mm M.S angle alround & 2 vertical intermediate

angle supports at equal distance welded to sheet

with 2 Nos. of 50X50X6mm. M.S angle posts

M. long with arrangement of bolting, 3 coats of oil

painting etc.complete as directed by EIC. with

letter writing in Flex Banner

81 Brass C.P mortise lock ( GODREJ MAKE ) with

handles of approved quality. 4.00 No 685.00

82 Providing and fixing 450MM x 600MM size light

type C.I Manhole covers with water tight C.I fame

& fixing the same in concrete etc. complete as

directed by EIC.

SR NO. ITEM QTY PER RATE AMOUNT

83 Providing half nosing to edge of Kotah Stone /

Marble etc. complete.

84 Providing and fixing stainless steel font on any

surface at any height with necessary fasteners and

fixtures etc completed as directed by EIC. 49.00 Sq.ft 1242.00

85 Providing and laying interlocking Pre-Cast Rubber

Dye inter locking concrete Block 60mm thick with

grade of concrete M-200 pnumatic compressed by

mechanically pressed and as per approved design

including 75 mm sand layer for levelling and filling

the joint with sand in proper line and level.

86 P & F steel cupboard shutter of 20 gauge with

steel frame & fixing the frame with brick

masonary including locking arrangement with

coat of primer ( red oxide ) i.e asian, dulux or its

equivalent and 3 coats of approved oil paint i.e

asian, dulux or its equivalent etc. complete as per

requirement and instruction of EIC. 60.00 Sq.M 3666.00

87 Providing and fixing pre-cast concrete kerb stone

of gray cement based concrete block 30cm

length,30cm height and 15cm thick of M200 grade

concret as per approved design and including

excavation for fixing in proper line and level,filling

the joint with C:M 1:3 (1cement:3fine sand) etc

complete. 50.00 Sq.M 406.35

88 Providing & fixing Fix louvers of 114 mm wide GI

sheet having thickness of 0.55 mm & weight not

less than 490 gm/ meter roll formed to create

mm wide louver snap fixed on special shaped GI

channel. Fix louvers & channels shall finished with

powder coating of 55 micron including scaffolding,

labour etc. upto all height as approved by EIC.

89 P&F M.S conduit pipe gate/grill gate, form

appropriate secton and M.S.flat,square bar, M.S

sheet and grouting the pvot as per drawing and

design with necessary brackets, hold fasts, locking

arrangement on top & aldrop on both the side.

90 Providing and fixing terra cotta jali in fabrication

frame or in masonary or RCC member gap with

mm wide with required cement based adhesive

materils as per EIC. 36.00 Sq.M 1450.00

SR NO. ITEM QTY PER RATE AMOUNT

91 Steel work, welded in built up sections framed

work including cutting, hoisting, fixing in position

and applying a priming coat of red lead with two

coats of oil paint. (A) In beams and joists, channels

angles Tees, flats, with connecting plates or angle

cleats as in main and cross beams. Hip and jack

rafters, purlins conneted to common rafters and

the like .( all materials shall be brought by

contractor) 2419.00 Kg 95.18

92 Providing semi corrugated colored G.I. sheets

roofing fixed with galvanized iron J or L hooks,

bolts and nuts 8mm diameter with bitumen ancl

G.L iimpet compiete excluding the cosi of,purling,

rafters and trusses.(1) 0.50 mm thick sheot

93 Constructing 125 mm thick Controlled cement

concrete M- 250 Grade with Trimix with power

trowling sheet form work with M.S. channels,

srinking of fair hardness, Non oxidzing, Non

metalic, heavy duty floor hardner of FOSROC or

equivalent at the rate of 0.5 Kg./Sq.M. with

mm x 10 mm size groove cutting in concrete as

constructution joint with necessary equipments,

labors as per design etc. Complete.

94 Applying general insecticide pest control treatmet

to floors, cupboards etc including labour materials

etc. complete Using Hepltacloride 20 EC as per

6113_pests consentration wight .50 percent is

recommended one litre chemical emulsion dilute

with 39 litre of water will give. Total dilute

concentration will be 40 litre inclusive of one litre

chemical emulsion application .5 litre

chemical/sqm surface is recommended as per IS.

95 Providing and fixing 8 mm thick gypsum PVC

laminated false ceiling placed on main GI central

black linear tee of 32*24*.28 mm with long and

short cross GI central linear black tee of

26*24*.28 mm and wall GI angle of 20*20*.30

mm suspended by 18 gauge GI wire including

necessary fixures and fasteners etc completed as

directed by EIC. 19.00 Sq.M. 655.00

96 Drilling of bore well of 165mm.dia. by machine in

hard rock etc., complete, truly vertical with all

equipments and labours etc., complete as directed

by E.I.C.a) 0 to 150 M depth. 150.00 Rmt 226

97 Providing, fixing & lowering heavy duty 10 KG /

CM2 P.V.C. casing pipe suitable for 160 mm dia

bore well including necessary coupling connector,

solution etc. complete as directed by E.I.C.

98 Providing & Joining the flat copper cables

sufficient for 7.5 HP pump set etc., complete as

directed by E.I.C. a. 4mm flat cable 200.00 Rmt 75.00

SR NO. ITEM QTY PER RATE AMOUNT

99 Providing & Fixing top cap for 150mm.dia. pipe

clamps, socket & other accessories required for

completing the job as directed by E.I.C. 1.00 Nos. 662.00

100 Providing & Fixing standard switch board with

ampere and volt meter and wooden covered box

with locking arrangements and fiting on wall as

directed 1.00 Nos. 1500

101 Providing and fixing best quality of HDPE pipe of

approved ISS quality with all accessories fittings

jointing etc. suitable for submesible pump

lowering in bore etc. complete as directed by

EIC.(B) 32mm dia. Outer 10 kg/cm2 130.00 Rmt 87

102 Supplying and lowering the approved ISI

submersible pump for 2HP/24 stage in bore well

etc. comp. as directed including ISI approved MEI

type oil immersed auto transformer starter

commisionning and testing to required delivery

head(All accesaries will be paid separately)

103 Providing and fixing concertina coil fecing with

punched tape concertina coil 600mm dia 10meter

openable length (total 90mt) having 50nos round

per 6 mtr length, upto 3 mtr height of wall existing

angle iron "Y" shaped placed 2.4 mt to 3mt apart

with 9 horizontal R.B.T. reinforced barbed wire

stud tied with GI staples and GI clips retain

horizontal, including necessary bolts or GI barbed

wire tied to angle iron, all complete as per

direction of EIC with reinforced barbed tape (RBT)

spring core (25mm thcik) wire of high tensile

strength of 165 (cost of MS angle, CC block shall

be paid separetely)

104 Providing and fixing curtain made up of 50%

cotton and 50% polyster mixed cloths with chully

at the back 4" pleat double belt at the bottom

with 1" dia MS steel coated pipe with end

socket,the curtain should have proper overlap

with window on sides were feasible with 2" dia

steel ring on canvas putta with all labour material

any other consumable transportation

etc.completed as directed. 35.00 Sq.M 1400.00

105 Providing and planting Palm tree about 5 to

feet height as per EIC. 15.00 Nos. 1000.00

106 Providing and planting Ficus tree about 4 feet

height as per EIC. 15.00 Nos. 500.00

SR NO. ITEM QTY PER RATE AMOUNT

107 Main Fire Hydrant Pump LUBI/KSB/KIRLOSHKER

make SITC of: Back pull out type -Single Stage, Self

Mriming, Centrifugal Pump for Main Fire Pump

with Electric Motor, Meachanical Seal, Base frame

and Couplings. MOC:-Casing-CI, Impeller- Bronze,

Shaft- SS 410, Sleeve- SS410. Flow Capacity:

LPM Head: 30 to 35 mtr 2900RPM Pump shall be

capable of furnishing not less than 150% of rated

capacity at a head not less than 65% of rated head

he shut off head shall exceed 120% of rated head.

UOM:-Price Per Complete set of Pump + Motor +

108 Supplying & erecting approved control cubical

panel (Star - Delta) made from16 G. CRCA sheet

duly painted with epoxy powder painted inside

and outside with hinged doors and locking

arrangement, consisting of suitable size of ON-

OFF isolator (AC - 3/23 duty) main fuses, single

phasing preventer cum water level. Guard

(Complete unit), Toggle switch to by pass Single

phase preventer cum WLG, indicating lamps for R-

YB phases, over load relay, Automatic water level

controller, Ammeter & Voltmeter each with two

way selector switch incoming wires duly socket

Crimped, Panel to be erected on angle iron frame

grouted on wall as directed. Star Delta & main

contactor, overload relay, thermal / Electronic Star

delta cutoff timer, start - stop push buttons. The

isolator overload relay & contactors of L& T,

Siemens, Redex or Cuttler Hamer make only. Panel

to be erected on angle iron frame ground on

wall.make-Sky/Belife/L&T

109 Piping for Fire Safety Works Providing & Laying 'C'

Class Heavy G.I. pipe laying. Supply, fabrication,

installation, hydro testing & painting of above

ground pipe. with necessary pipe itments

(Flanges, Bands, Socket etc.) Vertically every 3 mt.

& Horizontaly every 2.5 mt. painted with one coat

of primer (Zinc Oxide) & two coats of finshing

paints GI support / Clamps / Hangers/pipe etc.

Hardware (Gaskets, Nut-Bolts, Paint etc.)

Consumables (Welding Rod etc.) and labour

charge. Quality : GI, C-Class (Heavy). Make -

Apollo/Surya prakash / Asian Note : The piping

installation has to be put to hydraulic test to1.5

times Working pressure before applying paint or

pipe coating and wrapping etc.

Complete.................100 mm diameter

SR NO. ITEM QTY PER RATE AMOUNT

110 Piping for Fire Safety Works Providing & Laying 'C'

Class Heavy G.I. pipe laying. Supply, fabrication,

installation, hydro testing & painting of above

ground pipe. with necessary pipe itments

(Flanges, Bands, Socket etc.) Vertically every 3 mt.

& Horizontaly every 2.5 mt. painted with one coat

of primer (Zinc Oxide) & two coats of finshing

paints GI support / Clamps / Hangers/pipe etc.

Hardware (Gaskets, Nut-Bolts, Paint etc.)

Consumables (Welding Rod etc.) and labour

charge. Quality : GI, C-Class (Heavy). Make -

Apollo/Surya prakash / Asian Note : The piping

installation has to be put to hydraulic test to1.5

times Working pressure before applying paint or

pipe coating and wrapping etc.

Complete.................80 mm diameter

111 Pressure Switch with Siphon Tube and Cock.

Supply, Installation and Testing of: Pressure Gauge

with Siphon Tube and Cock. MOC:-100 mm Dial-

Glycerin filled- Stainless Steel Body Pressure

Gauge with GI Siphon Tube and Brass Cock. Size:-

Dial: 100 mm Range: 0 – 15 Bar (kg/cm2) for

mm make-Danfoss/Orion/Indfos

112 Pressure Gauge with Siphon Tube and Cock.

Supply, Installation and Testing of: Pressure Gauge

with Siphon Tube and Cock. MOC:-100 mm Dial-

Glycerin filled- Stainless Steel Body Pressure

Gauge with GI Siphon Tube and Brass Cock. Size:-

Dial: 100 mm Range: 0 – 15 Bar (kg/cm2) for

mm make-Airmaster/H guru/Fiebig

113 NON- Return Valve Dual Plant Supply, Installation

and Testing of conforming to IS: 5312 complete

with rubber gasket, GI bolts, nuts, washers etc. as

required with necessary pipe fitments, hardware

and consumables. MOC:-Body: SS.plate SS

100 mm dia make-Zolato/Kartar/Osko

114 Fire Hydrant Landing Valve IS 5290 (Stainless

Steel (SS-304), ISI Marked): Supply, Installation

and Testing of: Fire Hydrant Landing Valve with

necessary pipe fitments, hardware and

consumables. Stainless steel 63 Female single

outlet type – “A“Hydraulic,Test : 21 Kgf/cm2

working parts, Water Test : Water tightness

14kgf/cm2, Flow Test : 900 LPM at 7 kgf/cm2,

MOC:-Body: Stainless Steel (SS-304), Working

Parts: Stainless Steel (SS-304), Coupling: Stainless

Steel (SS-304), Standard: -ISI Marked. Size:-63 mm

(Flange End: NB 75 mm, PCD 160 mm) MAKE :

Newage/Aaag/Sangam

SR NO. ITEM QTY PER RATE AMOUNT

115 Fire Hose reel drum Ahemdabad type 25 mm x

30 m Supply, Installation and Testing and

commisoning: ISI 884. With Thermoplastic pipe

with SS Shuttoff Nozzle. Standard: - ISI Marked &

TAC Approved Hose. Size:-25 mm dia x 30 m long .

MAKE : Newage/Sangam/Fusion 2.00 Nos. 3890.00

116 Fire Hose pipe type B Is 636 and male female

coupling intenseous SS 304 with GI binding legth

15mtr complete set . MAKE :

Newage/Sangam/Fusion 4.00 Nos. 3675.00

117 Cabinet For Fire Hose (Hose Box)- Double door

Type Supply, Installation and Testing of: Fire Hose

Cabinet (Hose Box) suitable to accommodate 15 m

long fire hoses and 01 no. of nozzle. With Lock-n-

key facility. Wall Mounting Design. MOC:

Gauge MS Box with Powder Coating Standard with

Size 500mmX500mmX250mm:- Suitable MAKE :

Newage/Sangam/Fusion

118 Short Branch Pipe IS 903 Conforming Nozzle.

Supply, Installation and Testing of: Short Branch-

pipe Nozzle. MOC: Stainless Steel (SS-304).

Standard: ISI Marked, Heavy Quality. Test :

Kgf/cm2 No. MAKE : Newage/Aaag/Sangam

119 Supply Installation and commisioning of 25mm

Brass Ball valve for connection of hose reel

thermoplstic pipe make-Zolato/Venus/Sant 2.00 Nos. 1780.00

120 Butterfly Valve 100mm Dia IS

Providing fixing testing and commissioning of SS.

Butterfly valve of class PN 1.6 rating of following

sizes. dia, Sant brand.(I.S.I) MOC:-Body: SS, Disk:

SS, Seat: Nitrile.Make Zolato/Kartar/Osko

121 Fire Service In-let (In-let Connection for Fire

Brigade)-2 Way Type. Supply, Installation and

Testing of: Fire Service Inlet with necessary

hardware and consumables. MOC:-Body: Heavy-

uty CI. Couplings/NRV:SS Standard: -Made As per

IS Standard- Heavy duty quality. Size:-Couplings:

63 mm, 100 mm E-table Flange End .MAKE :

Newage/Sangam/Fusion 1.00 Nos. 3652.00

122 Providing, Installation and Testing Fire

extinguisher IS 15683-2006 ISI marked BIS with

Peso 3 years ABC powder type 6 Kg. Supply,

installation and testing of ABC powder fire

extinguisher necessary hardware and

consumables. Stored pressure mechanism.

Charged with MAP-50% (ABC) Dry powder. with

wall mounting clamp.Make -V Safe/ Kanex

/Ceasefire 4.00 Nos. 1825.00

SR NO. ITEM QTY PER RATE AMOUNT

123 Providing, Installation and Testing of Fire

extinguisher - CO2 Gas type 4.5 kg. Supply,

installation and testing of CO2 Gas fire

extinguisher with necessary hardware and

consumables. Standard - Confirming to IS:15683-

2006 with ISI mark with Peso 5 years certified.

Make - V-Safe/Kanex / Ceasefire 5.00 Nos. 4275.00

124 Providing and fixing AUTOGLOW Signages in Block

/ Small Letters of Specified Sizes: as per design

and requirement as directed by EIC. 10.00 Nos. 185.00

125 Providing and fixing, testing and commissioning of

Conventional Fire Alarm control panel for G+1

building for 2 zones with complete wiring feeting

required as per engineer insruction

126 Providing and fixing, testing and commissioning of

Hooter cum strobe sounder with wiring complete

fittings. 4.00 Job 1456.00

127 Providing and fixing, testing and commissioning of

Manuel Call point with wiring complete fittings.

128 Making of hole by core cutting in concrete

member or masonary wall of diameter 0 to

mm as per requirement including all man material

and charges of core cutting machinery as directed

by EIC 4.00 Nos. 700.00

129 Charges for administrative consulting for obtaining

Fire NOC from concern department with all the

requried docuemnts and process and providing

fire system annual maintenance service contract

for keeping operational the fire safety system in

all respect for three (3) years & providing

mockdrill, awarness traning for staff as per rules

of fire at every 6 months as per GOG NBC Fire

norms. 1.00 Nos. 50000.00

130 Point wiring for Light / Bell with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch

/ bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden

box, single mounting base frame covered with

textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected,

with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.(f) with medium class

Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete Cat III

SR NO. ITEM QTY PER RATE AMOUNT

131 Point wiring for FAN with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (Green) both are of .ISI marked

1.1 KV Grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of

pipe erected with 6A Modular type switch and

hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of

following type erected on PVC / Metallic/Wooden

box, single mounting base frame covered with

textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected.

with necessary ceiling rose / H.D.Connector as

directed. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

complete cat-III

132 Point wiring for on board Looped Plug with 6A

Modular type switch & 5 pin socket erected on

PVC / Metallic/Wooden box, single mounting base

frame covered with textured / metallic/white

front plate modules erected on / in wall / ceiling

with following type accessories cat-III

Point wiring for Two Way Controlled Light Point

with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(green) both are of .ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires erected in

below type of pipe with 6A Modular type switches

and following type of accessories erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected on / in wall / ceiling as per pipe

erected. with necessary batten/angle holder or

ceiling rose or H.D.Connector as directed.(f) with

medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat iii

133 Providing following type of Modular Type

Accessories mounted with PVC / metallic/Wooden

box, single mounting base frame covered with

textured / metallic/white front plate , modules

erected with necessary connections as per site

situation directed by Engineer In charge (3) Two

Pin/RJ-11 Telephone Socket [B] For Two Gang cat-

III 7.00 Nos. 200.99

(7) Blank Plate Single Cat iii 57.00 Nos. 24.24

(8) Computer RJ-45 socket Cat iii 21.00 Nos. 153.52

133A (9) 16 Amp. SP one way switch cat-III 4.00 Nos. 172.71

133B (10) 6/16Amp. Universal socket cat-III 8.00 Nos. 190.89

133B (14) 6A/ 10A/ 16A/ 20A/ 25A/ 32A Double Pole

Modular MCB Switch cat-III 4.00 Nos. 390.87

SR NO. ITEM QTY PER RATE AMOUNT

Providing and erecting ISI mark Medium class

RIGID PVC PIPES of following size complete to be

erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed with

adhesive solution & Clamps with following dia of

pipes, in approved manner as directed (b) 25 mm

Providing and erecting Mains with 1.1 KV grade

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with

1.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity

of following size (A) With medium class Rigid PVC

pipe and accessories (a) 2 wire 1.5 sq. mm

providing and erecting Mains with 1.1 KV grade

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of

following size (A) with medium class Rigid PVC

pipe and accessories (a) 2 wire 4 sq. mm

(b) 2 wire 6 sq. mm 70.00 Mtrs. 140.39

(h) 4 wire 6 sq. mm 52.00 Mtrs. 248.46

providing and erecting Mains with ISI marked,

1.5KV grade electrolyte multi stranded, annealed

copper conductor with heat resistant PVC

insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor

starters & control wiring) with required size of

copper lugs, nuts and bolts if required.(e) One

wire 6.00 sq. mm 132.00 Mtrs. 53.53

(h) One wire 25.00 sq. mm 2.00 Mtrs. 225.23

Supplying & erecting approved make Telephone

Cable electrolytic copper conductor PE insulation

twisted in two pairs, & wrapped with FRLS PVC

tape & sheathed with FRLS PVC or HFFR outer

Jacket suitable for telephone wiring & confirming

to C-DOT erected in existing pipe. of following size

of conductors & nos.of pairs. With necessary

connections.[A] Conductor Size 0.5 mm (a)

Unarmoured (2) Two Pairs

Supplying & erecting approved make LAN cable of

following size in existing pipe as per direction [C]

Providing & erecting main Distribution (MDF)

indoor type, back mounted frame as per DoT

standard approved with krone strips (a) Suitable

for 10 pair 1.00 Nos. 949.40

SR NO. ITEM QTY PER RATE AMOUNT

Providing & erecting Switch board for Computer

or electric apparatus consisting of following

modular type accessories mounted with PVC /

Metallic concealed/open box with single mounting

base frame covered with textured/metallic /white

front plate, modules erected with necessary

connections as directed 1 no. 6A/16A universal

plug-switch combined. 3 nos. 6A Switch 3 nos. 6A

For Modular Type Accessories cat-III 21.00 Nos. 1081.71

Decorative call bell Ting-tong box type 250 volts

complete erected 3.00 Nos. 68.68

135 Supplying and erecting LED indoor fittings with

LEDs of wattage 0.2 Watt to 0.5 Watt assembled

on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/ aluminium die cast powder

coated and high U.V. & corrosion resistance with

diffuser with company mark/name 160V to 270V,

Power Factor more than 0.9, THD < 15%,CCT

K to 6500K,Luminaire efficacy> 85 lumens/watt

,LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)

(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity

between the ranges shown.) (A) Tube Light with

integral driver (iv) 22-24 Watts, Surge - 2KV,IP-20,

conventional 4 feet cat-III

136A Supplying and erecting LED indoor fittings with

LEDs of wattage 0.2 Watt to 0.5 Watt assembled

on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/aluminium pressure die cast

powder coated and high U.V. & corrosion

resistance with diffuser housed in aluminium

casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD <

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage

capacity between the ranges shown.) (A) Square/

Circular shaped Surface/Recessed Mount

Downlight with provision for spring loaded

mounting clips complete.IP20 (i) 5-9 watts,Surge-2

SR NO. ITEM QTY PER RATE AMOUNT

136 (A) Square/ Circular shaped Surface/Recessed

Mount Downlight with provision for spring loaded

mounting clips complete.IP20 (ii) 15 watts, Surge-

2 KV Cat iii 98.00 Nos. 427.23

137 Providing and erecting Approved make Three

Phase & Neutral LT Heavy Duty Switch

Disconnector Fuse Unit Cubical type for panel

mounting complete with operating mechanism

suitable to operate on 415V A.C. , 23A duty With

HRC fuses of suitable load confirming to IS.

(Part I & III). of following capacities.(c)100 Amp

Cat iii 1.00 Nos. 4442.99

138 Pproviding and erecting Approved make Four pole

moulded case circuit breaker having breaking

capacity ICU of 25 KA. at 415 V,having normal

current rating up to 25 A to 100A. with Fixed

thermal & magnetic release suitable to work on

A.C. supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in

existing 16 G.M.S. housing. ICS=100% of ICU only

Cat III 1.00 Nos. 6173.12

139 Providing and erecting Approved make Earth fault

Relay suitable to mount with inter connection

suitable to following size of moulded case circuit

breaker having CT ratio & MCCB rating as

following along with shunt trip 220V AC. with all

internal connections & complete erected in

existing M.S.housing.. (1) 15 A -100 A , CT Ratio

140 Supplying & erecting approved make Four Pole

415V change over switch interior for panel

mounting with operating mechanism A.C.23 duty

confirming to IS for (B)63 A Cat-III 1.00 Nos. 4785.38

141 Supplying and erecting triple pole & neutral 440V

/ 500V panel mounting Copper Busbars with four

equal Nos. of electrolyte bus having current

density not more than 1.6 Amp. / sq.mm (Rated

current / cross section area) duly wrapped with

colour insulating tape for phase sequence of

following current carrying capacity, erected with

necessary bus bar supports /insulators, main cable

socket to each bar, erected in existing cubical

panel with necessary connections. (A) Suitable for

100 Amp. Capacity

142 providing and erecting Miniature circuit breaker

single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA to

be erected in existing box. confirming to IS

8828/1996 with ISI Mark cat-III

143 Providing & erecting 240 V MCB double pole

switch for lighting Load (B Curve) having 10 KA

breaking capacity & confirms to IS : 8828 in

existing box having following capacity (B) 40 Amp.

cat-III 18.00 Nos. 295.93

SR NO. ITEM QTY PER RATE AMOUNT

144 Providing & erecting 415 V MCB Four Pole for

Motor & Inductive Load (C Curve) having 10KA

breaking capacity & confirms to IS :8828 in

existing box having following capacity (b)40 Amp.

cat-III 25.00 Nos. 668.62

145 Providing and erecting Sheet Steel powder coated

MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company

of MCB to be used) suitable for(A) single phase

incoming and horizontal single phase outgoing (b)

sheet steel double door (IP-43)(iv)12 way

146 (B) three phase incoming and single phase

horizontal type outgoing Per phase isolation type

(PPI) (b) sheet steel double door (i)4 way 1.00 Nos. 2339.16

147 providing and erecting Approved make RCCBs

conforming to IS: 12640 and having sensitivity of

30 mA and Short Circuit withstand capacity of

KA and suitable for operation on single phase

V,50Hz. having characteristic of quick action &

tripping with all advance feature & do not

incorporate any electronic component. for

following Max. rating erected as directed (ii)

40Amps. DP cat-III 6.00 Nos. 2235.13

148 Providing and erecting Annealed bare Copper wire

149 Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm

having 200-250 Micron galvanising, connection

terminal dia of 12mm with constant ohmic value

surrounded by highly conductive compound with

high charge dissipation suitable for following type

of applications with chamber and heavy duty

cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of

installation duly stamped and signed by agency

and officer Incharge has to ensure the value of

earthing resistane mentioned in test Certificate) &

having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:- 0.2 ohm /

meter testing as per IEC 62561-2017, Voltage

drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture

for long time Necessary test report must be

submitted by Agency. (a) For Electrical Installation 3.00 Nos. 4591.46

SR NO. ITEM QTY PER RATE AMOUNT

150 Providing & erecting weather proof, dust & vermin

proof, floor mounted front operated indoor type

cubical panel board necessary IP-42 and above

protection as per approval from engineer

incharge made from 14 SWG thick CRC M.S. sheet

for outer body & doors, 16 SWG thick CRC

M.S.sheet for internal partitions with necessary

accesories , supporting angles/ flats channel

including cutting, bending, drilling, welding,

riveting with internal partitions & cable alley as

per requirements & instruction of engineer-in-

charge with erection of supplied switch gears,

BUSBARS, suitable size of inter connecting PVC

copper wire / copper-aluminium strips, rubber

grommets, rib, bakelite control fuses/MCB for

measuring instruments, earth bus & earth bolts,

foundation flange - bolts-base Plates, sufficient

nos. of hinged doors, handles with locking

arrangement and rubber gasket, heavy duty end

terminal connection, danger notice

board,necessary ventilation,earthing strip

complete. The Panel shall be painted with epoxy

powder coating. (The rates excludes the cost of

switchgears, bus bars, inter connecting mains & 1.50 Sq. Mtrs 14902.55

151 Providing , erecting , fabricating the M.S. structure

as per requirement on site incorporating proper

size of M.S. angles,square,round, flats, bars,

channels, sections complete with cutting, welding,

grinding & finishing duly painted with one coat of

red oxide with erection on site as per direction of

engineer in charge with necessary grouting,

cementing, plastering & finishing complete.

152 Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor

for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe of following

size of cables (B) 3 1/2 core 35 Sq. mm ( 16 Sq.

mm 1/2 core) 10.00 Mtrs. 217.15

153 Providing and, fixing heavy duty flange type brass

double compression type cable gland with rubber

ring for PVC insulated armoured cable complete

with out going tails, insulating tape etc for

following size of cables.(B) 3 & 1/2 core 35/50 Sq.

154 Solder less crimping type Aluminium lugs

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

manner. (C) 16/25 Sq.mm. 2.00 Nos. 15.15

SR NO. ITEM QTY PER RATE AMOUNT

156 Providing & erecting Approved make Power Saving

50 Watt Ceiling Fan with double ball bearing ISI

mark with Condenser 230 volt A.C. 50 Hz

mm sweep complete having 3blades with

aluminium blades with , canopy & 30 cm. down

rod erected with earthing.(Make shall be

approved by Engineer in charge))

157 Supplying and erecting 19 / 20 mm. nominal bore

Medium Class M.S. Pipe down rod erected duly

painted for fan complete with proper insulation

without leakage and earthing.

158 Supplying & erecting fan hook box of 10 mm M.S.

round bar bounded to the RCC bars up to 50mm

length each side and pierced through a 16 Gauge

M.S. box / Heavy Duty PVC box complete erected

concealed in Ceiling with necessary finishing.

159 Providing 2.5mm.thick laminated acrylic sheet to

cover the fan hook or Fan box. 25.00 Nos. 18.18

160 SITC of Digital / PCM / TDM EPABX System having

SMT design, system with flexible universal slots.

Inbuilt Auto attendant facility, Minimum 15 Nos.

conference, Analog extension line, Calling GSM,

E&M line, PRI / EI & VOIP program me through

Analog telephone digital key from Ethernet, public

address cord, shall have unrestricted simultaneous

dialing facility,

QSIG protocol on PRI, 95 / STD / ISD / Local-

Locking, Class of Service, Quick Dial-Single Digit

dialing of any two external number, Once only ring

device, Chairman / Secretary - Do not disturb

Facility, Power Down Mode, Hot Line, Hot

Outward Dialing, Day Night Mode, Auto Call Back,

Barge-in, Call Pick Up & Call Transfer, Call transfer

while Ringing with Voice Guide System, (DISA),

Caller ID (CLI), CLI Base ECF, CLI Base routing

Internet Ready Port, External Music Port, Call

Budgeting, Call Most Calculation (ASMDR), DID

Direct Inverse Dialing, External Music Input, Fax

Homing, Global Directory Printing with following

capacities [[Approved by Competent Authority i.e.

not Below the rank of Executive Engineer ] [A] No

of Extension 16, No of Junctions 6, 8 Port IP 1.00 Nos. 45398.49

161 Providing and erecting Standard Push button

telephone (DTMF) Phones [[Approved by

Competent Authority i.e. not Below the rank of

Executive Engineer ] 7.00 Nos. 311.08

SR NO. ITEM QTY PER RATE AMOUNT

162 Providing and erecting water cooler having

storage capacity 80Ltr. & cooling capacity

Ltr.per hour @ an ambient temp of 45˚ C. The

outlet temp. of the water should drop by 15˚ C

within a hour, The water cooler should be

comprising of hermetically sealed compressor, fan

motor, condensing unit, water tank surrounded by

evaporating coil, thermostats, relay etc. complete

with necessary inlet & outlet connection. The

body of water cooler will be made from Stainless

163 Supplying & erecting 5 stage single reverse

osmosis water purification system with M.S.

powder coated frame, prefilter housing with 'O'

ring presediment filter GAC filter, carbon filter

suitable buster DC pump capacity 80 psi, mention

with 40 psi inline type post carbon filter auto low

& high pressure switches with following size of

storage tank & LPH capacity & erected as directed

[B] 25 Ltr / Hr with 30 Ltr. Storage Tank

164 Supplying and erecting approved make panel

mounting type Digital Voltmeter having 3 digits

LED display, 0 to 750 AC Volts range erected on

existing panel board with all connection, wiring

etc .with manufacturers calibration certificate.

165 Supplying and erecting approved make panel

mounting type Digital Ammeter having 3 digits

LED display, external CT operated, calibrated for

to 1000 Amps suitable to operate on 500 Volt AC

erected on existing panel board with all

connection, wiring etc .with manufacturers

calibration certificate. 1.00 Nos. 1558.43

166 Supplying and erecting Ammeter / Voltmeter

selector switch for 3 phase AC Supply 500 V on

existing panel board with necessary connections.

167 Providing & erecting L.T. Current Transformer

with bar primary 50/5 to 1000/5 ratio 15 VA

burden erected in existing CRCA box duly secured

with insulating materials connected to the meter

168 Supplying and erecting approved make suitable

panel indicator LED type lamp, lens cover,

complete erected with necessary connections. 3.00 Nos. 43.43

169 Providing & erecting open well horizontal mono

block pump set with cast iron body, complete for

three phase submersible motor having [C] For

HP 3 phase open well horizontal mono block

pump set suitable for 85 LPM to 270 LPM @

mtr to 33 mtr head suitable for 50/65 mm dia

delivery pipe Cat.II 2.00 Nos. 15707.52

SR NO. ITEM QTY PER RATE AMOUNT

170 Supplying & erecting approved make motor

control cubical panel (Direct - on - line) made from

16 G. CRCA sheet duly epoxy powder painted

inside and outside with hinged doors and locking,

arrangement consisting of suitable size of ON- OFF

isolator (AC - 3/23duty) main fuses, single phasing

preventer, indicating lamps for R- Y - B phases,

overload relay, Automatic water level controller,

Ammeter, Voltmeter each with two way selector

switch incoming, wires duly socket crimped, main

contactor & overload relay, start - stop push

buttons, to be erected on angle iron frame

grouted on wall as directed. The isolator, overload

relay & contactors will be of L & T, Siemens or BCH

make only. (A) DOL up to 5.0 H.P.

171 Lowering of submersible motor pump set at the

depth of following ,complete with required. Nos.

and size of casing pipes erected by means of

proper chain pulley block & pipe wrenches after

checking of threads of each pipe with coupling to

take the load of the pump set and pipe assembly

filled up with water(D)For Open well Horizontal

submersible pump set for sump well (i) 1 HP to

5 HP 2.00 Per Jobs 856.48

172 Providing and erecting ISI marked PVC insulated

PVC Sheathed Flat flexible Submersible copper

cable approved make of following Size.(B) 3 Core

173 Supplying of following size of HEAVY UPVC

column pipe with coupler and wire lock [B] 50 mm

dia 2.00 Rn. Mtrs 359.56

174 Supplying and erecting LED street light / Flood

light fittings with High power White LEDs wattage

of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than

5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage

capacity between the ranges shown.)(A) Street

Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-

voltage protection.(ii) above 48 to 60 Watts Cat iii

Total Cost. In Rs.

SR NO. ITEM QTY PER RATE AMOUNT

(B) Bidder's Offer _____% Above/Below of (A)

(C) Grand Total (C = A + B)

(C) Grand Total (C = A + B)

(D) Goods & Service Tax ( D = C x GST in % Prevailing or Applicable )

(E) Grand Total Including GST ( E = C + D )

(E) Grand Total Including GST ( E = C + D )

Chief Engineer (Material)

PGVCL, Corporate Office, Rajkot