Construction of Community Center at Medera Sahi in W No 26

Providing R.C.C. M20grade with 20mm and down graded CBHG chips including hoisting and laying with all cost carriage royality taxes and all labour involved for the completion of item of work as per direction of Engineer-in- charge. Colomn & Beam

Lintel

Stair

TMT reinforcement for R.C.C. work including cutting, bending, binding and placing in position Labor for including cost of binding wire 18 to 20 gauge and cost conveyance of M.S. rod etc. all complete.

Fly ash Brick masonry in cement mortar (1:6) in Superstructure with all cost , carriage, royality, taxes, and all labour involved for completion of item of work as per the direction of Engineer- in- charge.

Providing 12mm thick cement plaster (1:6) over the brick masonry walls including all cost of the materials, carriage, royality,alltaxes and all labour involved for completion of item of work as per the direction of Engineer-in-charge. 1st Floor

Ground Floor

Providing 16mm thick cement plaster (1:6) over the brick masonry walls including all cost of the materials, carriage, royality,alltaxes and all labour involved for completion of item of work as per the direction of Engineer-in-charge. 1st Floor

Ground Floor

6mm thick C:P (1:4) finished smooth including all cost of the materials, carriage, royality,alltaxes and all labour involved for completion of item of work as per the direction of Engineer-in-charge. 1st Floor

Ground Floor

supplying fitting and fixing of vertrifed tile in floors of size 600mm x 600mm(plain) of approved make conforming to IS: 13755 laid on 20mm thick cement mortar (1:4) (1 cement: 4 Course sand) and filling joints with white cement of approved quality including cost , conveyance, taxes, cost of all labour etc. complete.

Supplying fitting fixing of main gate GI framed fitting including all cost of the materials, carriage, alltaxes and all labour involved for completion of item of work as per the direction of Engineer-in-charge.

Painting two coats over a coat of primer on new wood/Steel work of doors, windows, grill and including all labour, T & P, cost of paints as per the direction of Engineer-in-charge.

Painting two coats with weather seal coat over a coat of water bound wall primer. 1st Floor

Painting two coats with plastic emulssion paint coat over a coat of water bound wall primer. 1st Floor

Ground Floor

Supplying, fitting & fixing of Stainless steel of 304 grade in hand railling using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe beacing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. requered for the complete in all respect.

Providing 2.50 cm thick grading concrete using C.C. (1:2:2) on roof slab with 6mm sizes down graded H.G. chips on new work etc complete as per diorection of the EIC.

Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC conduit with 5Amp, 250 V piano type switch with white colour frame ISI marked and ceiling rose ISI marked mounted on MS box having front bakelitecover of suitable size , MS box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor asearth wire including all accesories and connection as per direction of Engineer in Charge

Supplying and fixing of metal box of 150 mm x 75 mm x 60 mm deep (nominal size) on surface or inrecess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3pin 5 / 6 amps socket outlet and 5 / 6 amps piano type switch & with colour frame, connection, painting etc as required. complete as per the direction of Engineer-in-Charge..

Supplying and fixing of metal box of 150 mm x 75 mm x 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 2 nos MCB & with colour frame, connection, painting etc as required. complete as per the direction of Engineer-in-Charge..

Circuit or Sub-main wiring in 20/25/32/50mm dia. good quality ISI mark PVC Conduit with following sizes PVC insulated un-sheathed 1100V,Single Core FRLS Cu. conductor wire of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (2 x 1.5 + 1 x 1.0) sq.mm copper wire for 6A Light plug Point, wall fan.

(2 x 2.5 + 1 x 1.5) sq.mm copper wire from Main Switch to BDB.

Celling Fan

Supplying & Fixing of angle / Batten Holder fitting complete with 1 no of LED Lamp 10 watt of approved make complete with all other necessary fixing materials including termination & labour including all other materials as required complete as per the direction of Engineer-in-Charge(Philips/CG/Havells).

Supplying & Fixing of light angle / Batten Holder fitting complete with 1 no of LED Lamp 10 watt of approved make complete with all other necessary fixing materials including termination & labour including all other materials as required complete as per the direction of Engineer-in-Charge(Philips/CG/Havells).

Supplying & Fixing of outer flood light angle / Batten Holder fitting complete with 1 no of LED Lamp 10 watt of approved make complete with all other necessary fixing materials including termination & labour including all other materials as required complete as per the direction of Engineer-in-Charge(Philips/CG/Havells).

Display board with writing painting and photograph (Pre,dring & post)