/L Annual Surfacing (Periodic Maintenance ) on SHAHEED SAURABH KALIA ROAD VIA RADHA KRISHAN TEMPLE (VR ROAD) in Km 0/050 to 0/600 and 0/800 to 1/200 for the year 2026-27

Providing, laying, Wearing 63 to 45mm ( Sixty three to forty five milimetre) nominal size Grading-2, spreading andompacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel 80-100 Kn. in stages to proper grade and camber, applying and brooming, stone screening/ binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per technical specification Clasue 405 as per the direction of Engineer-in-Charge including carriage of material within all leads and lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, sale tax, or other taxes imposed by the Government but excluding GST.

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion pressure distributor at the rate of 0.225 Kg (Zero decimal two two five Kilogramme) per Square metres on the prepared bituminous surface cleaned with Hydraulic broom as per technical specification clause 503, as per directions of Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, sale tax, or other taxes imposed by the Government but excluding GST.

Providing and laying 30mm (Thirty millimetre) compacted thickness Bituminous Concrete with crushed stone aggregate of grading -II (Two), 13.2 (Thirteen point two) millimetre nominal size, using bitumen VG-10 (VG-Ten) ar the rate 5.5% (Five point five percent) of weight of mix and filler on thoroughly cleaned surface by mechanical broom and dust removed by compressed air, mixed in computerised batch mix/HMP of 80-100 (Eighty to hundred) TPH capacity calibrated from time to time, mixing the bituminous concrete as per approved job mix formula from approved laboratory, transporting the mix material in clean insulated vehicles covered while in transit or awaiting, tipping and laying with hydrostatic paver finisher with sensor control to the required level alignment and grade, rolling with smooth wheeled, vibratory and tandem power road roller to achieve the desired compaction as per MORT&H specification section 500 complete , within all leads and lifts including carriage of materials, plants and equipments by mechanical transport, as per the direction of Engineer-in- Charge. Nothing extra will be paid for higher bituminous contents required as per job mix formula. The rate is including octroi, royality, Malkana, toll tax, sale tax, or other taxes imposed by the Government but excluding GST.

Providing and Laying hot applied thermoplastic compound 2.5mm (Two decimal five millimetre) thick including reflectorising glass beads at the rate of 250 (Two hundred fifty) grams per square metre area, thickness of 2.5mm (Two decimal five millimetre) is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes as per MORTH technical specification clasue 803 complete in all respect including carriage of material within all leads, lifts and other incidentals . The rate is including octroi, royality, Malkana, toll tax, sale tax, or other taxes imposed by the Government but excluding GST.