GENERAL PMC PRO NO 548 2025 26 PARAKKULAM SC COLONY OPEN GYM General Civil Work

TILE WORK FOR OPEN GYM

16.78.1:Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With Material conforming to Grade - I ( size range 75 mm to 0.075 mm) having CBR Value- 30

OD483862/2025-2026:Supplying and laying interlocking tile 80mm or nearest size thickness, minimum strength M30 including providing a layer of 6mm aggregate for 5cm thickness, then laying interlock cobbles in lines and levels as per the directions of the departmental officers at site inclusive of all cost & conveyance charges etc. complete.

16.42:Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size ) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete

10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

OD483863/2025-2026:NAME BOARD

OD490722/2025-2026:Supply, fixing and commissioning Arm and Shoulder Wheel with Lat pull for Out Door Open Gym complete with foundation units, SS bolts and nuts etc., cost including cost of materials, labour charge, transporting charges and foundation concreting charges etc. complete as directed by the departmental officer at site. Specifications 1. SIZE: 1700MM x 1200MM x 2000MM 2. MAIN FRAME: 125MM x 2.5MM and 100MM x 2.5MM GI SECTION PIPE 3. NUT BOLTS: STAINLESS STEEL NUT BOLT 4. BEARINGS: 6204 and 6005,2RS - SEALED REPUTED MAKE [NSK JAPAN or Equivalent] 5. SEAT: 5MM IRON SHEET 6. FULLY POWDER COATED

OD490723/2025-2026:Supply, fixing and commissioning Seated Chest Press with Seated Leg Press for Out Door Open Gym complete with foundation units, SS bolts and nuts etc, cost including cost of materials, labour charge, transporting charges and foundation concreting charges etc. complete as directed by the departmental officer at site. Specifications 1. SIZE: 2300MM x 800MM x 2000MM 2. MAIN FRAME: 125MM x 2.5MM and 100MM x 2.5MM GI SECTION PIPE 3. FOOT REST: 5MM IRON CHECK PLATES 4. NUT BOLTS: STAINLESS STEEL NUT BOLT 5. BEARINGS: 6204 and 6005 ? 2RS - SEALED REPUTED MAKE [NSK JAPAN or equivelant] 6. SEAT: 5MM IRON SHEET 7. FULLY POWDER COATED

OD490725/2025-2026:Supply, fixing and commissioning Fitness Rider for Out Door Open Gym complete with foundation units, SS bolts and nuts etc., cost including cost of materials, labour charge, transporting charges and foundation concreting charges etc. complete as directed by the departmental officer at site. Specifications -PLATFORM FOR THE MANAGEN 1. SIZE: 1200MM x 1000MM x 1250MM 2. MAIN FRAME: 125MM x 2.5MM and 100MM x 2.5MM GI SECTION PIPE 3. NUT BOLTS: STAINLESS STEEL NUT BOLT 4. BEARINGS: 6204 and 6005, 2RS - SEALED REPUTED MAKE [NSK JAPAN or equivalent] 5.SEAT: 5MM IRON SHEET 6 FULLY POWDER COATED

OD490726/2025-2026:Supply, fixing and commissioning Double Twister Seating and Standing for Out Door Open Gym complete with foundation units, SS bolts and nuts etc., cost including cost of materials, labour charge, transporting charges and foundation concreting charges etc. complete as directed by the departmental officer at site. Specifications 1. SIZE: 1800MM x 600MM x 1500MM 2. MAIN FRAME: 125MM x 2.5MM and 100MM x 2.5MM GI SECTION PIPE 3. NUT BOLTS: STAINLESS STEEL NUT BOLT 4. BEARINGS: 6204 and 6005, 2RS - SEALED REPUTED MAKE [NSK JAPAN or Equivalent] 5. SEAT: 5MM IRON SHEET 6. FULLY POWDER COATED

OD490730/2025-2026:Supply, fixing and commissioning Rower Machine for Out Door Open Gym complete with foundation units, SS bolts and nuts etc., cost including cost of materials, labour charge, transporting charges and foundation concreting charges etc. complete as directed by the departmental officer at site. Specifications 1. SIZE: 1500MM x 950MM x 1350MM 2. MAIN FRAME: 125MM x 2.5MM and 100MM x 2.5MM GI SECTION PIPE 3. FOOT REST: 5MM IRON CHECK PLATES 4. NUT BOLTS: STAINLESS STEEL NUT BOLT 5. BEARINGS: 6204 and 6005, 2RS - SEALED REPUTED MAKE [NSK JAPAN or equivalent] 6. SEAT: 5MM IRON SHEET 7. FULLY POWDER COATED

OD490732/2025-2026:Supply, fixing and commissioning Stepper with Twister for Out Door Open Gym complete with foundation units, SS bolts and nuts etc., cost including cost of materials, labour charge, transporting charges and foundation concreting charges etc. complete as directed by the departmental officer at site. Specifications 1. SIZE : 1800MM x 850MM x1500M? 2. MAIN FRAME: 125MM x 2.5MM and 100MM x 2.5MM GI SECTION PIPE 3. FOOT REST: 5MM IRON CHECK PLATES 4. NUT BOLTS: STAINLESS STEEL NUT BOLT 5. BEARINGS: 6204 and 6005, 2RS - SEALED REPUTED MAKE [NSK JAPAN or equivalent] 6. SEAT: 5MM IRON SH??? 7. FULLY POWDER COATED

OD490733/2025-2026:Supply, fixing and commissioning Air Walker for Out Door Open Gym complete with foundation units, SS bolts and nuts etc, cost including cost of materials, labour charge, transporting charges and foundation concreting charges etc. complete as directed by the departmental officer at site. Specifications 1. SIZE: 600MM x1200MM x 1250MM FOR THE MANAGEMENT 2. MAIN FRAME: 125MM x 2.5MM and 100MM x 2.5MM GI SECTION PIPE 3. FOOT REST: 5MM IRON CHECK PLATES 4. NUT BOLTS: STAINLESS STEEL NUT BOLT 5. BEARINGS: 6204 and 6005, 2RS - SEALED REPUTED MAKE [NSK JAPAN or equivalent] 6. SEAT: 5MM IRON SHEET 7. FULLY POWDER COATED

OD490737/2025-2026:Supply, fixing and commissioning Knee Chair Out for Out Door Open Gym complete with foundation units, SS bolts and nuts etc, cost including cost of materials, labour charge, transporting charges and foundation concreting charges etc. complete as directed by the departmental officer at site. Specifications 1. SIZE: 700MM x500MM x 800MM 2. MAIN FRAME: 125MM x 2.5MM and 100MM x 2.5MM GI SECTION PIPE 3. NUT BOLTS: STAINLESS STEEL NUT BOLT 4. BEARINGS: 6204 and 6005, 2RS - SEALED REPUTED MAKE [NSK JAPAN or equivalent] 5. SEAT: 5MM IRON SHEET 6. FULLY POWDER COATED

OD490740/2025-2026:upply, fixing and commissioning single Sit Up Board for Out Door Open Gym complete with foundation units, SS bolts and nuts etc, cost including cost of materials , labour charge, transporting charges and foundation concreting charges etc. complete as directed by the departmental officer at site. Specifications 1. SIZE : 1750MM x500MM x 300MM 2. MAIN FRAME: 125MM x 2.5MM and 100MM x 2.5MM GI SECTION PIPE 3. NUT BOLTS: STAINLESS STEEL NUT BOLT 4. FULLY POWDER COATED

OD490741/2025-2026:Providing and commissioning fixing Bridge Ladder Out Door Gym complete with foundation units, SS bolts and nuts etc, including cost of materials, labour charge and foundation concreting charges etc. as per following specifications 1. SIZE: 2600MM x1300MM x 2400MM 2. MAIN FRAME: 125MM x 2.5MM & 100MM 3. NUT BOLTS: STAINLESS STEEL NUT BOLT 4. FULLY POWDER COATED x 2.5MM GI SECTION PIPE

OD490743/2025-2026:Supply and commissioning of Push Up Bars for Out Door Open Gym as directed the department al officer at site.

fencing

10.25.1:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads,landings etc. of stair cases, including use of chequered plate wherever required, all complete

OD493696/2025-2026:Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts , bolts and washers as required complete as per the direction of Engineer-in- charge.Made of G.I. wire of dia 2 mm

4.1.4:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources)