SPECIAL REPAIR TO WK COMPRISING OF ROOF REPAIR COMPLETE REWIRING SANITARY FITTING AND PLASTERING AT BLDG NO 768 OR INSTITUTE AND CERTAIN SANCTIONED WORK UNDER AOR OF AGE BR II OF GE A CENTRAL JODHPUR (8920/E8)

Amount

Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 M in depth for foundation etc or for shafts, wells, cess pits, manholes, pier holes etc not exceeding 10 Sqm on plan and not exceeding 1.5 M in depth and getting out in any type of soil , complete all as specified and as directed.

M&L for cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundations filling, sub base and mass concrete filling, etc , complete all as specified and as directed.

M&L for squarred rubble walling Jodhpur type regular course, well bonded, bedded & solidly hearted, built in cement mortar 1:6, complete all as specified and as directed.

Extra over for hammer dressing to face stone with max depression on face from a streight edge not exc 20mm and dressing face beds and joints , complete all as specified and as directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil , complete all as specified and as directed.

Earth filling under floor, including spreading, leveling, watering and well ramming in layers n.exc 25 cm in soft/loose soil , complete all as specified and as directed.

Removing of excavated materials to a distance not exceeding 50 M and deposing where directed at a level not exceeding 1.5 M above the starting point

M&L Precast cement concrete block masonary type C1 (1:3:6) 20 mm graded stone agg with solid blocks 10 cm thichk and setting in cement mortar 1:6 , complete all as specified and as directed.

M&L for hard core broken stone of gauge n. exc. 63mm, deposited, spread and levelled in layers n. exc. 15cm thick, water and rammed to a true surface complete all as specified and directed.

M&L for 75mm thick cement concrete type D-2, 1:4:8, as in sub base to floor, complete all as specified and as directed.

M&L for 30mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregates as in sub base of floors, finished the surface even and rough , complete all as specified and as directed.

M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cm 1:4, complete all as specified and as directed.

M&L for Glazed ceremic coloured tiles size 300mm x 200mm and 7mm thick as per IS-13712 Grade II(a) over 15mm thick rendering in CM (1:6) set and jointed in neat cement slurry and pointed with colour cement to match on vertical surfaces as in dados, complete all as specified and as directed.specified and as directed.

M&L for mild steel TMT or twisted bars 10 mm dia and over as in reinforcement cut to length, bent in shape required including cranking, bending, spirally hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc, complete all as specified and as directed.

Description all as per item No 11 above but mild steel deformed or twisted bar 6mm to 8 mm dia, complete all as specified and as directed.

Ditto as per item 11 but 5 mm dia and over up to and including 10 mm dia in stirrups, spacers and binders, complete all as specified and as directed.

M&L for M-25(20mm graded agg) design mix RCC in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and as directed.

M&L for M-25 (20mm graded agg) design mix RCC in beams, cantilevers, bressummers; lintels over 1.5m span, complete all as specified and as directed.

M&L for M-25 (12.5mm graded agg) design mix RCC in Chhajjas , complete all as specified and as directed.

M&L for form work to soffits of roof slabs, floor slabs and similar work n exc 200 mm thick fair finished surfaces (flat).

M&L for form work to Edges to conc flat 10-20 cm fair finished surfaces (flat).

M&L for form work to chajja fair finished surfaces (flat), complete all as specified and as directed.

Formwork for flat fair finished surface to sides & soffits of floor or roof beams haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc, complete all as specified and as directed.

M&L for 30mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregates as in roofs, finished the surface even and smooth with WPC complete all as specified and directed.

M&L for carrying out water proofing treatment for roofs in the following stages:- (a) First coat of mitumen primer confirming to IS-3384-1986 @ 0.40 kg/Sqm over and including 10mm thick cement mortar 1:4 surface finished even and smooth without using extra cement all as specified. (b) Second coat of bonding material using blown type bitumen confirming to IS-702-1988 grade 85/25 @ 1.20 Kg/Sqm. (c) Third coat of APP modified polymeric membrane centre core of 100 microne HMHDPE outer film 20 microne both sides thickness 2.00mm having weight 3.00 Kg/Sqm. (d) Fourth coat of bondig material using blown type bitumen confirming to IS-702-1998 of grade 85/25 @ 1.20 Kg/Sqm and sprinkling coarse (sieved) sand over hot bitumenous surface to form keys to hold PCC. (e) Fifth and top most layer of surface finish which act as protective layer shall be of 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded agg of crushed stone pedding well compected with V-shaped groove 6mm wide and 10mm depth filled with mastic bitumen of (1:1) of proportion complete, size of PCC panel with grooves shall not be exceed 0.36 Sqm all as specified.

M&L for roguhly squarred stone lintels hammer dressed on face and soffits hoisted, set and pointed incm 1:6 complete n.exc 3.00 m in length, complete all as specified and as directed.

M&L for 7.5cm thick sand stone slabs as in chajjas n.exc 2m in length punched dressed on face and along exposed edges, self faced on other side and set andpointed in cm 1:4 , complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in copings, bed plates, plinth courses, parapets and the like including weathering, slightly rounded or chamfered angles and throating including use and waste of necessary form work etc complete all as specified

M&L for 50 mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection laid in bays not exc 1.5m with expansion joints 30x10mm filled with mixture of hot bitumen and sand, finished the surface even and smooth without using extra cement complete all as specified and directed

M&L for 15mm thick rendering in cm 1:6 on stone masonry finished even and smooth without using extra cement, complete all as specified and as directed.

M&L for 10mm thick rendering in cm 1:6 on ceiling, concrete surface, finished even and smooth without using extra cement.

M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 , complete all as specified and as directed.

M&L for 3 coats of white wash on walls including preparation to newly plastered surfaces preparation to newly plastered surfaces , complete all as specified and as directed.

-do- but on ceiling.

Preparation of newly plastered/unplastered surfacce and applying two coats of cement based paint over one coat of Primer on wall, complete all as specified and as directed.

S & F factory made PVC door frames of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube suitable for opening as per site condition, complete all as specified and as directed.

S & F factory made solid panel PVC door shutter 28 to 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement , supply and fixing in the frame complete all as specified and directed.

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

S&F of 35mm thick 2nd class Hard wood paneled door shutter factory made (two panel) with lock rail andpanel of 9mm thick BWP commercial ply wood, the size of rail and stile is as per IS 1003 (Part-I), Kiln seasoned and chemically pressure treated.

M&L for two coat of enamel paint over a coat of pink primer on new wooden surface including preparation of surface, over 10Cm width or girth all as specified.

S&F 100mm long butt hinges, extruded alluminium alloy with galvanized mild steel hinge pin, anodized and fixed, type B-21 complete all as specified and directed.

S&F 200mm long aluminium anodized barrel tower bolt of extruded section and fixed complete all as specified and directed.

S&F 150mm long alluminium handles, cast type, anodized and fixed complete all as specified and directed.

S&F of aluminium alloy anodised sliding door bolt woth hasp and stalpe (bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed 16mm dia and 300mm long , complete all as specified and as directed.

S&F steel windows or ventilators partly fixed and partly top hung with glazing bars , complete all as specified and as directed.

M&L for applying two coat of synthetic enamel paint on steel surfaces of any description not otherwise described over 10 cm width or girth over red oxide including necessary preparation , complete all as specified and as directed.

S&F 3mm thick sheet glass Pin headed and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed

S&F vitreous china wash down water closet pan orrisa pattern, white excluding flushing cistern and flush pipe, complete all as specified and as directed. Make: Parryware/Hindware

S&F PVC low level 10 lit capacity valve less syphonic action type flushing cistern with inlet ball valve and handle including brackets complete all as specified and directed Make: Parryware/Hindware

S&F PVC connections of 15mm size with PTMT nuts of 600mm long ,complete all as specified and directed.

M& L Salt glazed stoneware gully traps of 100x100mm size, square or round mouthed, type‘P.,complete all as specified and directed

S&F bib taps 15mm, chromium plated, fancy type, cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe 15mm bore complete all as specified and directed Make Jaquar/Kohler

S&F stop valves, 15mm chromium plated, fancy type, cast copper alloy, screwed down, high pressure with crutch or butter fly handles, screwed both ends for iron pipe 15mm dia, fixed complete all as specified and directed

Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats .(Minimum weight 170gms) Make:- Jaquar/Parryware

S&F Soap dish, vitreous China white, approximate size 160x160x90mm Make:- Jaquar/Parryware

M&L for 75mm dia of outlet, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall, complete all as specified and directed.

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in wall or in floors complete all as specified and directed.

S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to trenches, complete all as specified and directed.

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors ,complete all as specified and directed.

S & F for 75 mm bore PVC (SWR) bends any radius with oval access doors ,complete all as specified and directed.

S & F PVC (SWR) vent cowl suitable for 100mm bore of pipe ,complete all as specified and directed.

S&F 110 mm dia PVC (SWR) junction (single ‘T’) equal or un-equal with access door ,complete all as specified and directed

S&F grating dome 100mm dia of PTMT (minimum weight 25 gms) complete all as specified nad directed.

S&F 110 mm dia PVC (SWR) reducers complete all as specified and directed

S&F 500 litres capacity rotational moulded polyethylene water storage tanks Triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including one 20mm PTMT ball valve with polythene float and fly nut complete all as specified and directed.Make :- Sintex/Star

S&F 15 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors complete all as specified and directed

S&F 20 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors ,complete all as specified and directed

M & L for machine cut kota stone slab 40-50 mm thick as in partition of urinal ,complete all as specified and directed

Cutting chasing pinning in making good to facing in CM 1:3 exe 10cm but n. exe 20 cm in stone wall.

S & F guard bars with ends of bars shouldered ,complete all as directed.

Steel window with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded ,complete all as specified.

Supply & Fixing steel tubing 25mm bore medium grade ISI Marked galvanized with and including all fitting on wall, ceiling or laid to floor ,complete all as specified and directed

M&L for connecting 25 mm bore GI pipe from existing water supply line including necessary excavation , clamping making holes to existing pipe line

Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe 25 mm bore and fixed,complete all as specified and directed

Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20 mm bore and fixed,complete all as specified and directed

Surface excavation n.exc 30cm deep and avg getting out soft/loose soil,complete all as specified and directed

M&L for 75mm thick cement concrete type B-1 1:4:8 (using 20mm graded crushed stone aggregate) as in sub base ,complete all as specified and directed

M&L for sand filling under floors etc complete incl watering & well ramming complete.

S&F machine made precast cement concrete blocks (Interlocking pavers ) rubberised finished coloure of 60mm thick top layers of anti abrasive material laid over 50mm thick sand cushion. The interlocking tiles joint will be filled with fine sand,complete all as specified and directed

M&L for providing precast cement concrete type B-1 1:2:4 (Using 20 mm graded agg) as in kerb sone etc. (of any section indicatd), with plain fair faces, including chamfers, weathering, throating etc. and setting in cement mortar 1:4 complete with joints to match,complete all as specified and directed

Providing precast RCC using 20mm graded aggregate as in cover slab for man holes set in CM 1:6,complete all as specified and directed

S&F TMT bars 10mm dia and over TMT Bars dia , cut to length , bent to shape required, incld cranking, bending spirally for hooping for columns, hooking ends and binding with and incld mild steel wire (annealed) not less thaan 0.90mm dia or securing with clips.

S&F TMT bars 6mm dia to 8mm dia , cut to length , bent to shape required, incld cranking, bending spirally for hooping for columns, hooking ends and binding with and incld mild steel wire (annealed) not less thaan 0.90mm dia or securing with clips

Plain Cement Concrete type C1 1:3:6 (using 20 mm graded granite stone aggregate) cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work.

Cutting into existing manholes for connecting new drain pipe and making good to pipe and rendering cutting out existing benching for and forming branch (1/2type B-1 smooth finished, and reforming benching as required] round or 3/4th Section) in cement concrete 1:2:4 channel

M & L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150 mm bore.

S & laying of RCC Pipe NP-2, 150 mm dia laid in trenches and jointed in CM(1:1) with collars complete to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150 mm bore,complete all as specified and directed

Dismantling of mild steel work of any descripdtions,complete all as directed

S&F anodised aluminium door shutters , aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screwes etc. complete all as specified.

S&F for 4.8 mm thick plain glass ordinary quality & glazing exe .5 sqm each,complete all as specified and directed

S & F PVC beading to fix glass in aluminium door shutter.

S&F rolled section as in main and cross beams, hip and jack rafters, purlins where connnected to common rafters and running rails and guides for sliding door etc conf to Fe 410- W,complete all as specified and directed

S&F for Pre-laminated galvatume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified

S&F for wind ties for roof incld securing bolts etc all complete

S & F Welded steel wire fabric complete to steel member.

Demolition of un-reinforced cement concrete of any description and in any position complete all as specified.

M&L 40mm thick pre-cast cement concrete louvres and jallies (measured solid) in cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate including all moulding and set in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.

Taking down existing water proofing including PCC padding complete all as directed

M&L for PCC 1 : 2 : 4 type B0 using 12.5 mm graded stone aggregate as levelling course of old roof slab complete all as directed

Supply only Integral water proofing compund

M&L for PCC 1 : 2 : 4 type B0 using 12.5 mm graded stone aggregate as in roof kerb including weathering, slightly rounded or chamfered angles and throating, as directed etc

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level),complete all as directed

M&L for 50mm thick PCC 1:3:6 type C-1(using 20mm graded crushed stone aggregates) as in plinth protection,complete all as specified and directed

M&L 25mm thick PCC type B-1 (1:2:4) using 20mm graded stone aggregate to receive floor tiles/kota stone all as specified.

M&L 15mm thick screed bed in CM 1:6 all as specified for laying of floor finishes

Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as in skirting/vertical surface.

S&F anodised aluminium frame of standard section for doors, windows , ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

Taking down cement plastering from stone masonry and ceiling etc incl hacking for key scrubbing down with water etc complete all as specified & directed

M & L for rendering 15mm thick to stone masonry surface of wall in CM 1:6 finished even and smooth w/o using extra cement ,complete all as specified and directed

M&L for Rendering 10 mm thick CM (1:4) on concrete surfaces on ceiling finished even and smooth ,complete all as specified and directed

M&L for three coat of white wash over newly plastered surfaces incl preparation of ceiling etc. all as specified.

M&L for three coat of white wash on newly plastered surfaces incl preparation of previously untreated wall surface.

Taking down chowkhats of any description (with out taking off shutter from the frame) n exc 1.5 Sqm ,complete all as directed

Taking down chowkhat or frames(without taking off shutters from frame) exc 1.5 sq m but n exc 4 sq m each ,complete all as directed

M & L for glazed steel window fabricated with M S hollow section with side hung shutter including hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded all as per Drg No. CEJZ/TD/20 sheet no.1/3 to 3/3,complete all as specified and directed

M & L for gauged steel window fabricated with M S hollow section with side hung shutter including hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded all as per Drg No. CEJZ/TD/20 sheet no.1/3 to 3/3.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones,complete all as directed

S&F of 4mm thick pin headed sheet glass panes of size not. exceeding 0.5 Sqm fixed with oil putty,complete all as specified and directed

S&F of Galvanised mild steel wire cloth,0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples,complete all as specified and directed

M&L for PCC 1:2:4 type B1 Mix using 20mm graded crushed stone aggregate as in hold fast iron fixing and back filing of pressed steel door frame including necessary form work all as specified.

S&F Pressed steel frames for doors of size 125x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

S&F 35mm thick 2nd class glazed and skelton shutter, open rebated and prepare to recieive glass, gauge etc (without sash bars)edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass or gauge etc all complete

S&F 100mm size butt hinges medium weight (ISI Marked), rolled mild steel complete.

S&F of 150 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed

S&F decorative type PVC coated curtain rods including curtain ring with two brackets fixed to wall complete

S&F of fancy type curtain rod knobs coloured for fixing in wall with curtain rod etc

Raking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar all as specified

M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 ,complete all as specified and directed

M&L for two coat of cement based paint on plastered or unplastered surface of wall after preparation of surface,complete all as specified and directed

Removing complete existing treatment and preparation of old surffaces by brooming down or steel wire brushinng scraping moulds,mossand effloroscent salts & tradiing oil and greasy spots to wall including cornices etc plastered or unplastered surtfaces (old decorated surffaces) and M&L for applying two coats of white wash on ceiling all as specified and as directed.

Removing complete existing treatment and preparation of old surfaces by brooming down or steel wire brushinng scraping moulds,mossand effloroscent salts &tradiing oil and greasy spots to wall including cornices etc plastered or unplastered surtfaces (old decorated surffaces) and M&L for applying two coats of White wash wall all as specified and as directed.

Preparation of newly plastered wall surface & applying two coats of oil bound distemper ,complete all as specified and directed

M & L one coat of Birla white putty on newly wall plastered surface,complete all as specified and directed

Taking down steel water tubing and connections, 25mm dia including cleaning for re-fixing all as directed.

Taking down steel water tubing and connections, 20mm dia including cleaning for re-fixing all as directed.

Taking down steel water tubing and connections, 15mm dia including cleaning for re-fixing all as directed.

Dismantling water tanks of capacity exc 250 ltr n exc 500 ltr and removing to store ,complete all as directed

S&F of cast iron floor traps, 75mm dia, with SS grating incl jointing to waste pipe fixed in cement conc type B-1 (1:2:4) all as specified.

S&F 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed,complete all as specified and directed

-Ditto- all as item No 68 above but for 25 mm bore pipe ,complete all as specified and directed

S&F of vitreous china clay water closet ORISSA Pattern size 580x 440 mm white with integral foot rest incl 'P' or 'S' traps, flush pipe of 32mm dia HDPEpipe etc all as specified.Make :- Parryware/Hindware

S&f in repair PVC valveless syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including brackets incld 32 mm PVC flush pipe as fixed in repairMake :- Parryware/Hindware

S&F in of 15 mm boreStop valves, ,fancy type, chro-mium plated , high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed to 15 mm bore GI Pipe

S&F in rep Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) Vitreous China urinals,Half stall (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. including PTMT waste coupling , spreader and waste pipe complete Make :- Parryware/Hindware

S&F in rep Brass chromium plated shower rose 125mm size

S&F of 600 mm long PVC connction 15 mm size with PTMT nuts of length 600mm.

M&L for two caot of synthetic enamel paint to newly steel surface over a coat of red oxide after preparaion steel surface over 10cm in width or grith, not otherwise described over a coat of red oxide after preparaion of new steel surface,complete all as specified and directed

Demolition of stone masonary built in CM all as specilfied and as directed.

S&F for PVC gully trap 125/110mm setting and jointing with solvent cement

S&F of CI nahani/floor trap 100 mm bore , with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4)

-ditto- all as item No 102 above but 75 mm bore

S&F of CI bend 100 mm bore complete and jointing to pipe

-ditto- all as item No 104 above but 75 mm bore bend

S&F of Cast iron cowls of 100 mm bore pipe

S&F of Branch pieces, doubl (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches for 100 mm bore CI pipe,complete all as specified and directed

S&F of Branch pieces, doubl (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches for 75 mm bore CI pipe ,complete all as specified and directed

Dismantling of cast iron or reinforced concrete drain pipes, of 100 mm/75 mm bore jointed in cement mortar and taking out of trenches, if required

S&F Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floorsin repar for CI pipe 100mm dia laid in floor/Wall with cement joint ,complete all as specified and directed

Ditto as item No 111 above but 75mm dia

Grinding rubbing & polishing of existing kota stone flooring

Taking down carefully copper/aluminium point wiring for light, fan, bell socket power slocket etc complete with boards, outlet boxes fittings and fixtures such as switchs, sockets, lamp holders bracket, ceiling rose etc complete

Point wiring complete with 1.5 sq mm single core multi stranded copper conductor PVC (FR) insulated unsheathed cable confirming to IS-694,1100 Volts grade ISI Marked ( class V conductor , Make: KEI ) in and including PVC conduit (ISI Marked) not less than 20 mm dia with accessories fixed on surface of wall / roof / ceiling etc and including sunken pressed steel terminal boxes in wall but including 3.00 mm thick plastic laminated sheet top cover (ISI marked HYLEM sheet Make: Anchor ) and 1.50 sq mm PVC insulated unsheathed stranded copper conductor for common earth and connecting to earth dolly material and labour for:- Note :- (i) Accessories i.e switch/socket shall be measured and paid separately under relevant item of Sch 'A'. (a) One light point controlled by one, one way switch.

(b) One fan point controlled by one way switch.

(c) One socket outlet 3 pin 5/6 Amps on same board

(d) One socket outlet 3 pin 5/6 Amp on independent board

All as per item No 2 above but with 2.5 Sq mm single core multistanded copper conductor cable for 6 pin 15 Amp socket outlet on independent board .

S&F switch flush type single pole one way 5 Amp

S&F switch flush type single pole one way 15 Amp

S&F Angle Lamp holder metal cased insulated body of brass with back plate suitable for batten fittings ,complete all as specified and directed

S&F socket outlet 2 in 1, 5 pin, 5 Amp flush type

S&F socket outlet 2 in 1, 6 pin, 5 and 15 amp flush type

Suply & Fixing Fluorescent tube light fitting. single tube, 1 x 20 w, T8, Complete with LED Tube rod 20 Watt 230 v ( power factor not less than 0.90 ), bipin holders connector block, .Provided for connectiong up with PVC insulated and sheathed , 1100 volts grade , flexible , multistranded 1.0 sq mm copper conductor three core cable all as per directedby engr in charge.

Suply & Fixing Light fittings, with1X10watt LED 230 volt 50 Hz bulk head luminaries, complete. Provided for connecting up with PVC insulated and sheathed , 1100 volts grade , flexible , multistranded 1.0 sq mm copper conductor three core cable.

S & F Ceiling rose, 3 terminal/PVC/ polycarbonate, isolated body

supply and fix socketed stepped type electonic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd

M&L in repairs sub main wiring with 6 Sq mm single core multistrandred copper conductor PVC insulated and unsheathed cable passing through existing PVC / steel conduit and making good the distrurbed surface of wall incl 4 Sq mm single core copper conductor cable PVC insulated and unsheathed cable as earth wire. Note :- Two runs of cable 6 Sqmm and One run of 4 Sqmm shall be measured as unit length.

S&F distribution board in sheet metal encl when MCB to be used with 200 Amps rated copper bus bar , company prewired , IP 54 ,( cat no.-6077 31 of make: Legrand )confirming to relevant IS SPN 8 way. MAKE; LEGRAND/ ABB

S&F MCB single pole 5 to 30 Amps MAKE; LEGRAND/ ABB

S& F MCB SPN 40 amps MAKE; LEGRAND/ ABB

Earthing complete with galvanised steel earth plate electrode 60 x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) wih top edge of the plate not less than 1.5 metres below normal ground level, nnected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in elevtrical plate no. 5 connected to Earthing test point all as ecified or indicated including testing on completion( Rates are deemed to be included for necessry earth work ,PCC pit , RCC cover & GI 15 mm dia protection pipe upto 7.5 mtr. lead etc. complete)

Point wiring complete with 1.5 sq mm single core multi standard copper conductor (FRLS) PVC insulated unsheathed cable confirming to IS:694, 1100 Volt, ISI marked in and incl PVC casing /caoing, medium grade,25/32 mm, ISI marked with accessories on the surface of walls, including pressed steel terminal boxes with earth terminal and dully painted blak inside and out side incl 3.00 mm thick plastic laminated sheet top cover with 1.50 sq mm PVC insulated unsheathed stranded copper conductor as earth conductor for common earth and connecting to earth dolly for One light/Fan point controlled by one, one way switch

M&L for angle holder made out of poly carbonate with metal lamp ISI marked with back plate fixed on PVC square block with CFL 20 Watt( HPL/ Phillips/Bajaj)..Make : Legrand /ABB/ANCHOR

S& F LED tube light fitting. single tube, 1 x 9 w, T8, 230 v ( power factor not less than 0.90 ) connection up with PVC isulated and sheathed,1100 voltsgrade, flexible , multistranded 1.0 sqmm copperr conductor three core. Make CG / PHILIPS / Wipro.

S&F switch flush type 5 Amp single pole one way ISI Marked..Make : Legrand /ABB/ANCHOR

S&F ceiling rose, surface backelite 65x50 mm thick three terminals ISI Marked fixed on PVC square block.Make : Legrand /ABB/ANCHOR

Supply and Fixed LED Mirror light fitting 8 Watt including LED Lamp ,surface mounted lumnaire ,pre wired complete Including Electic Connection. Make Havells Model No. LHEXBLP7PN1W008 Or equivalent in Philips.

Supply and Fixed connecting and commissioning of bulk head fitting 10 watt LED IP -65 protection and making connection with copper conductor cable to fitting with 3 core 1.5 sqmm PVC insulated cable complete all as specified. Make Havells / Philips/CG

S & F exhaust fan 300 mm sweep complete with louvers . Make- Havells, Bajaj, CG

S&F distribution board reccessed in wall double door in sheet metal encl when MCB to be used with 200 Amps rated copper bus bar prewired confirming to relevant IS, IP-42( cat part no.SD- make Legrand or equivalent) SPN 6 way, . Make – Legrand /SIEMENS/ABB

S&F MCB single pole 5 to 30 Amps.Make – Legrand /SIEMENS/ABB

S&F Isolator SPN 16 Amps.Make – Legrand /SIEMENS/ABB

Supply,laying and fixing only along the poles or passing through walls etc jointing and testing LT Cross Linked Polythene Insulated galvanised steel strip armoured electric cable 1100 volt grade heavy duty ISI marked with aluminium conductor and overall served with an outer sheath of PVC of cross sectional area 10 sqmm x 2 core all as directed by Engg-in-charge.

Excavating in trenchs, n exc 1.5m wide and n exc 1.5m in depth; for laying of cables etc. n.exc 10sq m on plan and n exc 1.5m in depth and getting out in any type of soil.

Removing excavated material (soil) not exceeding 50 metre and deposRing where directed at a level not exceeding 1.5 metre above the starting point

Returning, filling in trenches with excavated soil, including, spreading, levelling, watering and well rammin in layers not exceeding 25 cm thick complete.

Supply and laying ,Jodhpur stone quarry faced stone slab cover 40 to 50mm thick, 25cm to 30cm wide, 60cm long, laid dry and abutting each other with gap cetween adjacent slab not exceeding 10mm over under ground cables for protection.

Sand cushioning to under ground cable using river sand and gently punning for cushioning to cable all as specified.

M & L for earthling complete with galvanized Steel earth plate electrode 600 x 600 x 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 meters below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and incl galvanized earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel and earth wire protected by GI protection pipe light grade 15mm dia connected to main earth wire on pole or controll board GI pipe light grade 20mm bore for watering funnel with wire mesh PCC chamber pit in PCC 1:3:6 type C-1 40mm yhick Precast RCC -25 cover reincorced with 8 mm dia TMT bars @ 10 cm C/C on both sides and handle, excavation and earth work in any type of soil and removal upto 50m complete all as sprecified and shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion.

M&L pipe galvanized iron light grade complete with all fittings laid in road crossing, and on pole, buildings complete all as specified and directed ISI marked. of 40mm bore.

Supply and fixing LED Type tube light fitting 22/20 watt complete with LED Tube rod 20/22 watt , not less than 2100 lumens complete with all acessories duly prewired and making connection to ceiling rose with flexible copper conductor cable twin core of size- 1.00 sq mm

S&F sheet metal enclosure double pole powder coated finish .Make – Legrand /SIEMENS/ABB

S& F MCB SPN10 amps Make – Legrand /SIEMENS/ABB

Supply and fixing 1100 volts grade heavy duty PVC insulated aluminium conductor un armoured cable pvc sheathed service connection cable suspended by insulating hangers not more 1 mtr apart of size 6 sq mm 2 core .

Note for all above items:All items are for M&L /S&F and to be executed in "Repairs" only unless otherwise specifically mentioned as "Supply only" or "fixing only" in BOQ. Contractors are requested to quote their rates accordingly.

Jai Doulat Construction Co

BEYLIM INFRA

M/S KAUTILYA GARG

M/s Vishnu Infrastructures