Renovation of C type quarters in TNPL Housing Colony at TNPL Unit I - Phase I

PREPARE SURFACES OF WALLS AND PLASTER INTERIOR, EXTERIOR AND TOP FACES WITH CEMENT MORTAR, 12MM THICK IN CM 1:4 INCLUDING NECESSARY SCAFFOLDING AND CURING ETC., COMPLETE FROM FFL TO +7.00 MTR LEVEL.

PREPARE SURFACES OF BASE COURSE BY REMOVING ALL LOOSE MORTAR BY HACKING AND LAY TO REQUIRED SLOPE 25MM THICK GRANO FLOOR OF MIX 1:1.5:3 USING  10 TO 12MM GRANITE CHIPS INCLUDING FINISHING THE TOP LAYER WITH A STEEL TROWEL AND FLOAT WHILE LAYING WITHOUT ANY ADDITIONAL CEMENT OR MORTAR AT ALL LEVELS.

TAKE DELIVERY OF HIGH STRENGTH RIBBED DEFORMED BARS/ MS BARS ISSUED BY TNPL FREE OF COST, CUT, BEND AND TIE UP IN POSITION INCLUDING COST OF SUPPLYING NECESSARY 18 GAUGE BINDING WIRE FOR ALL TYPES OF RCC WORKS AT ALL LEVELS.

CEMENT CONCRETE M25 USING 20MM SIZE BLUE GRANITE AGGREGATE FOR ALL CEMENT CONCRETE ITEMS SUCH AS COLUMN, BEAM, SUNSHADE, SHELL WALL, ROOF SLAB, STAIRCASE, ETC., EXCLUDING SHUTTERING BUT INCLUDING LEVELLING, CURING, ETC., COMPLETE ABOVE FFL TO +7 MTR LEVEL.

FORM WORK - WROUGHT AND PUT UP WITH GOOD QUALITY MARINE GRADE PLYWOOD FOR ALL TYPES OF SHUTTERING WORKS LIKE COLUMN, BEAM, SUNSHADE, SHELL WALL, ROOF SLAB, STAIRCASE, ETC., AS "PLASTER FREE FINISH" ABOVE FFL TO +7 MTR LEVEL.

SUPPLY AND LAYING OF FLY ASH BRICKS IN SUPER STRUCTURE IN CM 1:6 INCLUDING SCAFFOLDING, CURING ETC., COMPLETE ABOVE +0.00 MTR TO +7.00 MTR

SUPPLY OF "JOHNSON" OR "SOMANY" OR "KHAJARIA" MAKE VITRIFIED FLOOR TILES OF SIZE 2' X 2' AND APPROVED SHADE, FIXING IN POSITION AND SKIRTING WITH BED MORTAR 1:3 20MM THICK AND POINTING THE JOINTS WITH TILE MATE COMPOUND ETC., COMPLETE AT ALL LEVELS.

SUPPLYING AND FIXING OF CERAMIC FLOOR TILES ANTI SKID OF SIZE 300 X 300MM X 8MM THICK OF APPROVED MAKE AND SHADE WITH BED MORTAR IN CM 1:3, 20MM THICK TO DESIRED SLOPE AND POINTING THE JOINTS WITH TILE MAT COMPOUND, CURING, ETC., COMPLETE AT ALL LEVELS FOR TOILETS.

SUPPLYING OF WALL TILES OF APPROVED MAKE, SIZE AND DESIGN / SHADE AND FIXING THEM IN POSITION FOR WALLS WITH BED MORTAR IN CM 1:3, 20MM THICK, PREPARING THE SURFACES AND POINTING THE JOINTS WITH TILE MAT COMPOUND AS DIRECTED BY ENGINEER INCHARGE.