Loading…
Loading…
Tender ID
Tender Value
₹70,000
EMD Value
₹1,750
Closing Date
17 Mar 2026, 5:00 pmClosed
ASSISTANT ENGINEER
ASSISTANT ENGINEER OFFICE OF ASSISTANT ENGINEER MATHUR GP
Annual Plan-Annual Plan Mathur GP 2025-26 RENOVATION OF ANIKODE WATER TANK PIPE P 251
2026_LSGD_845536_1
251/2025-26/AE/LSGD/MTR
Open Tender
Civil Works - Others
Item Rate
240 days
MATHUR GRAMA PANCHAYAT
Please refer Tender documents.
7 documents required · 7 mandatory
₹555
Yes
₹1,750
Yes
9 Mar 2026
9 Mar 2026
19 Mar 2026
9 Mar 2026
17 Mar 2026
9 Mar 2026
water tank
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
50.18.9.9.2:Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in CHarge. 110 mm dia 4 Kg/cm2
5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources)
5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.05 MB
fot.pdf
Tender Documents • 0.33 MB
intgrity.pdf
Tender Documents • 0.23 MB
afdvt.pdf
Tender Documents • 0.28 MB
BOQ_1428122.xls
BOQ • 0.30 MB
prelimn.pdf
Tender Documents • 0.29 MB
viewsbd.pdf
Tender Documents • 2.49 MB
epay.pdf
Tender Documents • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .