REPAIR MAINT OF STEEL AND WOODEN FUR ARTICLES INCLUDING REPLACEMENT OF UNSV PLYWOOD FROM CHARPOY GI WITH AND CHARPOY STELL WITH PLYWOOD HELD ON CHARGE OF BSO A JAMNAGAR AND ISSUED TO UNIT DEPLOYED UNDER IN THE AOR OF HQ 31 INF BDE

Amount

SCH A PART I ( REAPAIR OF STEEL FURNITURE ITEMS)

RECANNING OF CHAIR VARANDAH STEEL

M & L for removing unserviceable cane from seat of Chair Varandah and Recanning the same with best quality plastic cane 4mm wide and 0.4 mm thick of make : Premier/sha or any other approved make after cleaning throughly all the surfaces of chair including required welding work for broken frame whereever required and all as specified and as directed by Engr-in-charge

M & L for removing unserviceable cane from back of Chair Varandah and Recanning the same with best quality plastic cane 4mm wide and 0.4 mm thick of make : Premier/sha or any other approved make after cleaning throughly all the surfaces of chair including required welding work for broken frame whereever required and all as specified and as directed by Engr-in-charge

M&L for Removing of unserviceable Rubber shoe Chair verandah S&F with new Rubber shoes as per existing size on drg and directed.

Complete removal of old painting by mechanical mean and Preparing surfaces by red oxide primer for preparing surfaces, covering non steel surface to avoid paint marks and painting required Minimum of Two nos of coat of synthetic enamal paint only by spray painting machine Chair Varandah at the place directed by engr in charge

REPAIR/PAINTING OF CHAIR CB STEEL WITH ARMS : FD 75M

M & L for removing unserviceable seat from chair CB steel with with arms and S & F new seat made out of first class teak wood and canned with 2mm wide and 0.3mm thick plastic cane white colour and 4mm wide .4mm thick plastic cane for all round the border including black painting to the wooden frame and fixing to the same with 4 Nos GI Nut and bolts of size 3/16"X3" long with two washers on either side of the seat, and all as specified and as directed by Engr-in-Charge.

M & L for removing unserviceable back from chair CB steel with arms and S & F new back made out of first class teak wood and canned with 2mm wide and 0.3mm thick plastic cane white colour and 4mm wide .4mm thick plastic cane for all round the border including black painting to the wooden frame and fixing to the same with 4 Nos GI Nut and bolts of size 3/16'X3" long with two washers on either side of the seat, and all as specified and directed by Engr-in-Charge.

M & L for removing unserviceable/broken runner and S&F new runner of MS Flat 500mmx18mm x3mm to chair CB tubular steel arms with suitable welding as per drg, and all as specified and as directed by Engr-in-Charge.

M&L for removing unserviceable broken arms rest left or right of chair CB Steel with Arms and supply and fix new arms rest left or right made out of 1st class hard wood teak shape and size suitable for Chair CB Steel with Arms all as directed by Engr-in-Charge and as shown on drg.

M & L for preparation of steel surfaces by emery paper to Chair CB steel with arms and applying one coat of synthetic enamel paint olive green shade approved quality over a coat of red oxide primer and all as shown on Drg. and as directed by Engr-in-Charge.

REPAIR/PAINTING OF CHAIR CB STEEL WITH OUT ARMS : FD 75M

M & L for removing unserviceable seat from chair CB steel with out arms and S & F new seat made out of first class teak wood and canned with 2mm wide and 0.3mm thick plastic cane white colour and 4mm wide .4mm thick plastic cane for all round the border including black painting to the wooden frame and fixing to the same with 4 Nos GI Nut and bolts of size 3/16"X3" long with two washers on either side of the seat, and all as specified and as directed by Engr-in-Charge.

M & L for removing unserviceable back from chair CB steel with out arms and S & F new back made out of first class teak wood and canned with 2mm wide and 0.3mm thick plastic cane white colour and 4mm wide .4mm thick plastic cane for all round the border including black painting to the wooden frame and fixing to the same with 4 Nos GI Nut and bolts of size 3/16'X3" long with two washers on either side of the seat, and all as specified and directed by Engr-in-Charge.

M & L for removing unserviceable/broken runner and S&F new runner of MS Flat 500mmx18mm x3mm to chair CB tubular steel without arms with suitable welding as per drg, and all as specified and as directed by Engr-in-Charge.

M & L for preparation of steel surfaces by emery paper to Chair CB steel with out arms and applying one coat of synthetic enamel paint olive green shade approved quality over a coat of red oxide primer and all as shown on Drg. and as directed by Engr-in-Charge.

Repair to Charpoy GI pipe with Ply top comprising of the following items:- FD-220

Removing of old unserviceable ply from charpoy G.I. 32mm and tightening the frame and making it suitable for fixing plywood top and providng 12mm thick (7 Nos of ply) commercial plywood ISI marked BWR type and fixing of hard rubber shoes to the bottom of legs complete all as specified and directed by Engr - in- Charge. note the required rail will be issued under Sch B GI pipe and converting it to required rail/legs and fixing with no extra cost for fixing

Taking out existing unserviceable GI pipe three way elbow from GI pipe charpoy & Supplying and fixing new GI elbow, 32 mm bore, three way, medium grade, approved quality complete all as specified and as directed by the Engineer - in - Charge.

Taking out existing unserviceable GI check nut from GI charpoy & Supplying and fixing new 32 mm GI check nut complete all as specified and as directed by the Engineer - in - Charge.

Taking down existing unserviceable GI pipe long rail of 32 mm bore from GI pipe charpoy & fixing new long rail of 32 mm bore GI pipe, medium grade, of length as per existing long rail with proper threading complete all as specified and as directed by the Engineer - in - Charge. Note : (a) GI Pipe 32 mm bore will be issued under Sch B free for fixing. (b) cutting and threading of GI pipe shall be deemed including in the quoted rates.

Taking down the existing short rails and making new short rail by cutting the existing GI pipe long rails 32 mm bore obtained from Item No. 6.04 threading suitably and fixing with existing old elbow complete all as specified and as directed by the Engineer - in - Charge.

Making the existing unserviceable GI pipe short rail 32 mm bore of charpoy obtained from Item No.6.05 above and converting into legs by cutting, threading suitably and fixing with existing elbow including providing 3 mm thick MS base plate equal to outer dia of the pipe, welded at the bottom of the leg all as shown in drawing complete all as specified and as directed by the Engineer - in - Charge.

Table dining steel 1900x665 mm FD-165 (IT Table)

Removing unserviceable table top & Supplying and fixing new table top, 19 mm thick block board, with 22 guage aluminum sheet over it complete all as specified.

Taking down and S&F new rubber shoes to the legs of the table complete all as specified.

Rejoining the frame of MS tube with required nos of spot weilding of broken joints where required as per drg.

M & L for preparation of steel surfaces by emery paper to table dinning steel and applying one coat of synthetic enamel paint black shade approved quality over a coat of red oxide primer and all as shown on Drg. and as directed by Engr-in-Charge

Locker bed side Steel FD 1029

M& L for Removing old unserviceable hasp and staple from Locker Bed side and S & F new hasp and staple of approved quality of existing size fixed with screw/ welding to shutter of Locker all as specified and directed by Engr-in-Charge.y as shown in drg.

M& L for Removing old unserviceable Handle from Locker Bed side and S & F new handle of approved quality of existing size fixed with screw/ welding to shutter of Locker all as specified and directed by Engr-in-Charge.y as shown in drg. .

M& L for Removing old unserviceable hings from Locker Bed side and S & F new hings of approved quality of existing size fixed with screw/ welding to shutter of Locker all as specified and directed by Engr-in-Charge

M& L for Removing old unserviceable legs from Locker Bed side and S & F new legs of approved quality of existing size fixed with screw/ welding to shutter of Locker all as specified and directed by Engr-in-Charge.

Refixing loose shelves with spot welding of broken joints nut exceeding 25mm in length.

h) M& L Removing unserviceable existing door shutter of locker bed side and S&F new shutter made out of 1 mm thick PGI sheet complete all as per drg.

& L for preparation of steel surfaces by emery paper to Locker bed side steel and applying one coat of synthetic enamel paint black shade approved quality over a coat of red oxide primer and all as shown on Drg. and as directed by Engr-in-Charge

Almirah Small Steel & Almirah Med Steel FD-1032,DB-3359,FD-114

M & L for preparation of steel surfaces by emery paper to Locker bed side steel and applying one coat of synthetic enamel paint black shade approved quality over a coat of red oxide primer and all as shown on Drg. and as directed by Engr-in-Charge

M& L for Removing old unserviceable Hings from Almirah small/med steel and S & F Hings of approved quality of existing size fixed with screw/ welding to shutter of almirah all as specified and directed by Engr-in-Charge. as shown in drg.

M& L for Removing old unserviceable lock Assembly from Almirah small/med steel and supply and fix new lock assembly including 6mm thick bars round with necessary fittings of approved quality all as specified and directed by Engr-in-Charge all as shown in drg .

M& L for Removing old unserviceable Handle from Almirah small/med steel and S & F new handle 150mm 6 of approved quality of existing size fixed with screw/ welding to shutter of almirah all as specified and directed by Engr-in-Charge.y as shown in drg.

M& L for Removing old unserviceable locks from Almirah small/med steel and S & F new 6 lever lock with duplicate key (2 Nos of key) of approved quality of existing size fixed with screw/ welding to shutter of almirah all as specified and directed by Engr-in-Charge.y as shown in drg.

M& L for Removing old unserviceable Legs from Almirah small/med steeland S & F New legs of approved quality of existing size fixed with almirah all as specified and directed by Engr-in-Charge. as shown in drg

M& L for Removing the existing dented shelves from Almirah small/med steele and bringing the item to the original shape and refixing the shelves with necessary cleats/nuts/bolts including one coat of synthetic enamel paint over a coat of red oxide primer and all as specified and directed by Engr-in-Charge. all as shown in drg.

M& L for Removing old unserviceable door shutter from Almirah small/med steel and supply and fix door shutter necessary fittings of approved quality all as specified and directed by Engr-in-Charge all as shown in drg

Charpoy with hard top (steel)

Carrying out minor repairs like denting & gas welding of broken legs/cleat etc and spray painting with one coat of the black colour synthetic enamel paint to complete as directed by Engr-in-charge.`

M & L for preparation of steel surfaces by emery paper to Charpoy with hard top steel and applying one coat of synthetic enamel paint black shade approved quality over a coat of red oxide primer and all as shown on Drg. and as directed by Engr-in-Charge

Removing old u/s ply and supply and fix new ply as per existing pattern all as specified and directed.

Removing old unserviceable shoes S&F new shoe for bottom legs

Almirah Large Steel. FD-1031,67,FD 114

M & L for preparation of steel surfaces by emery paper to Locker bed side steel and applying one coat of synthetic enamel paint black shade approved quality over a coat of red oxide primer and all as shown on Drg. and as directed by Engr-in-Charge

.M& L for Removing old unserviceable locks from Almirah large steel and S & F new 6 lever lock with duplicate key (2 Nos of key) of approved quality of existing size fixed with screw/ welding to shutter of almirah all as specified and directed by Engr-in-Charge.as shown in drg.

M& L for Removing old unserviceable Handle from Almirah large/steel and S & F new handle 150mm 6 of approved quality of existing size fixed with screw/ welding to shutter of almirah all as specified and directed by Engr-in-Charge.y as shown in drg.

M& L for Removing old unserviceable Hings from Almirah large steel and S & F Hings of approved quality of existing size fixed with screw/ welding to shutter of almirah all as specified and directed by Engr-in-Charge.y as shown in drg.

M& L for Removing old unserviceable Legs from Almirah large steel and S & F New legs of approved quality of existing size fixed with almirah all as specified and directed by Engr-in-Charge.y as shown in drg

M& L for Removing the existing dented shelves from Almirah large and bringing the item to the original shape and refixing the shelves with necessary cleats/nuts/bolts including one coat of synthetic enamel paint over a coat of red oxide primer and all as specified and directed by Engr-in-Charge. all as shown in drg.

M& L for Removing old unserviceable lock Assembly from Almirah large steel and supply and fix new lock assembly including 6mm thick bars round with necessary fittings of approved quality all as specified and directed by Engr-in-Charge all as shown in drg .

M& L for Removing old unserviceable door shutter from Almirah large steel and supply and fix door shutter necessary fittings of approved quality all as specified and directed by Engr-in-Charge all as shown in drg

BED STEEL WITH HARD TOP FOR OFFICER / JCO FD/E6/MAP/08®

Carrying out minor repairs like denting & gas welding of broken legs/cleat etc to Bed steel with plywood top complete as directed by Engr-in-charge.`

M & L for preparation of steel surfaces by emery paper to Bed Steel with hard top steel for officer and JCO,s and applying one coat of synthetic enamel paint black shade approved quality over a coat of red oxide primer and all as shown on Drg. and as directed by Engr-in-Charge

Removing old unserviceable prelaminated board from footer frame and S&F new prelaminated board of size 750x350x18mm thick prelaminated particular board exterior grade complete as directed by Engr-in-charge.`

Removing old unserviceable prelaminated board from Header frame and S&F new prelaminated board of size 750x350x18mm thick prelaminated particular board exterior grade complete as directed by Engr-in-charge.`

Removing old unserviceable short rails and S&F new short rails of Bed Hard size 900x65x25mm rectangular MS pipe 18 guage using gas welding and standard workmanship complete as directed by Engr-in-charge.

Removing the existing unserviceable plywood top from Bed steel with hard top for officer and S&F new 12mm thick BWR plywood of size 1974mmx824mm type with nut and bolt (10 Nos) All as shown on drg Make : Kitply/Century / Greenply.

Removing old unserviceable long rails and S&F new long rails of Bed Hard size 1974x65x25mm rectangular MS pipe 18 guage using gas welding and standard workmanship complete as directed by Engr-in-charge.

Removing old unserviceable stiffners and S&F new stiffner rails of Bed Hard size 850x25x25mm rectangular MS pipe 18 guage using gas welding and standard workmanship complete as directed by Engr-in-charge.`

Removing old unserviceable shoes S&F new shoe for bottom legs

Table bed side (MAP) FD/E6/MAP/15(R) ,FD-157

d)Complete removal of old painting by mechanical mean and Preparing surfaces by red oxide primer for preparing surfaces, covering non steel surface to avoid paint marks and painting required Minimum of Two nos of coat of synthetic enamal paint only by spray painting machine to table bed side at the place directed by engr in charge

a) Removing of existing unserviceable top and S&F with new top of 18mm thick prelaminated particle board (Both side laminated), exterior grade as shown in drg.

b) Removing of existing unserviceable sides and S&F with new sides of 18mm thick prelaminated particle board (Both side laminated), exterior grade as shown in drg.

c) Removing of existing unserviceable back plywood and S&F with new back plywood 6mm as shown in drg.

d) Removing of existing unserviceable upper drawer and S&F with new upper drawer as shown in drg.

e) Removing of existing unserviceable lower drawer and S&F with new lower drawer as shown in drg.

f) Removing of existing unserviceable handle and S&F with new hadne as shown in drg.

g) Rejoining the joints of MS tube with spot weilding in any length where required as per drg.

h) Removing of existing unserviceable rubber shoe and S&F with new rubber shoe as shown in drg.

Repair to Chairs Verandah with PVC Seat FD/MAP/15/06

a) M&L for Removing of U/S canning of seat of chair verandha and recanning of seat of chair verandha with new nylon cane as per drg.

b) M&L Removing of U/S canning of back of chair verandha and recanning of back of chair verandha with new nylon cane as per drg.

d)Complete removal of old painting by mechanical mean and Preparing surfaces by red oxide primer for preparing surfaces, covering non steel surface to avoid paint marks and painting required Minimum of Two nos of coat of synthetic enamal paint only by spray painting machine Chair Varandah at the place directed by engr in charge

c) M&L for Removing of unserviceable Rubber shoe Chair verandah S&F with new Rubber shoes as per existing size on drg and directed.

Table dining steel 900x900 mm FD-1009

d)Complete removal of old painting by mechanical mean and Preparing surfaces by red oxide primer for preparing surfaces, covering non steel surface to avoid paint marks and painting required Minimum of Two nos of coat of synthetic enamal paint only by spray painting machine Table dinning steel at the place directed by engr in charge

a) Removing unserviceable table top & Supplying and fixing new table top, 18 mm thick prelaminated particle board, one side decorative lamination and other side balancing white lamination, Medium density, exterior grade with 4 mm thick Teak wood beading duly French polished complete all as specified.

b) Provision of 300 mm long MS clamps made of 3 mm thick MS flat by welding including bending complete all as specified.

c) Taking down and S&F new rubber shoes to the legs of the table complete all as specified.

d) Rejoining the legs of MS tube with required nos of spot weilding of broken joints where required as per drg.

S&F new legs and welding as per existing drawing with required preparing & painting as per drawing . Complete all as specified and directed.

S&F new MS tube for frame and welding as per existing drawing with required preparing & painting.as per drawing complete all as specified and directed.

Table Office Clk Steel & Table Typist Steel FD-1004, FD-84

d)Complete removal of old painting by mechanical mean and Preparing surfaces by red oxide primer for preparing surfaces, covering non steel surface to avoid paint marks and painting required Minimum of Two nos of coat of synthetic enamal paint only by spray painting machine Table office clerk steel at the place directed by engr in charge

a) Removing U/S Lock with S&F New Lock as per Drg.

b) Removing U/S drawer with S&F New drawer as per Drg.

c)Removing of U/S TOP with S&F New TOP as per drg.

d) Removing of U/S Rubber Shoe with S&F New Rubber Shoe as per drg.

e) Rejoining the joints of MS square tube with spot weilding of broken joints not exceeding 25mm in length as and where required as per drg.

Chair steel with Cushion FD 360

d)Complete removal of old painting by mechanical mean and Preparing surfaces by red oxide primer for preparing surfaces, covering non steel surface to avoid paint marks and painting required Minimum of Two nos of coat of synthetic enamal paint only by spray painting machine Table dinning steel at the place directed by engr in charge

Removing old u/s cushion seat and S&F new cushion seat with all components as per FD

Removing old u/s cushion back and S&F new cushion back with all components as per FD

c) Removing of unserviceable Rubber shoe Chair verandah S&F with new Rubber shoes as per existing size on drg and directed.

e) Rejoining the joints of MS square tube with spot weilding of broken joints not exceeding 25mm in length as and where required as per drg.

Chair Revolving with Arms Fd/E6/MAP/01/, CWE/TP

a) Removing U/S star Base with caster wheels and S&F New star base including caster wheels as per drg.

b) Removing U/S castor wheel and S&F New castor wheel as per drg.

c) Removing U/S hydrolic gas pump and S&F new hydrolic gas pump as per drg.

d) Removing U/S handle and S&F new handle as per drg.

e) Removing old U/S upholstry of seat with cushion foam and S & F new good quality of upholstry of seat with cushion foam of 32density matching with existing as shown in drg.

f) Removing old U/S upholstry of Back with cushion foam and S & F new good quality of upholstry of Back with cushion foam of 32 densitybmatching with existing as shown in drg.

g) Removing of existing unserviceable tepastry of seat and S&F with new tepastry as shown in drg.

h) Removing of existing unserviceable tepastry of back and S&F with new tepastry as shown in drg. Note :Tepstry cloth shall not be less then Rs 200/ Mtr.

REPIAR TO TEAPOY VARANDAH STEEL FD35,255,383 , FD/E6/MAP/17

a) Removing of existing unserviceable top and S&F with new top of 18mm thick prelaminated particle board (Both side laminated), exterior grade as shown in drg.

g) Rejoining the joints of MS tube with spot weilding in any length where required as per drg.

h) Removing of existing unserviceable rubber shoe and S&F with new rubber shoe as shown in drg.

d)Complete removal of old painting by mechanical mean and Preparing surfaces by red oxide primer for preparing surfaces, covering non steel surface to avoid paint marks and painting required Minimum of Two nos of coat of synthetic enamal paint only by spray painting machine Table dinning steel at the place directed by engr in charge

SCH A PART II ( REAPAIR OF WOODEN FURNITURE ITEMS)

RECANING OF WOODEN CHAIRS M&L for removing unserviceable plastic cane and providing new plastic cane 2 to 2.5mm wide for weaving and 4mm wide plastic cane of 0.60mm thick for border work suitable for following description( weaving shall be Godrej pattern) and all as directed by Engr-in-Charge and as shown on drg.

Chair Writing (Seat) FD-280 /250/20

Chair Easy (Seat & Back) FD-229/17

Chair dining (Seat) FD-69/228, 279

REPAIRS TO CHAIR WRITING

M&L for removing unserviceable broken rear legs and supply and fix new rear legs made out of 1st class hard wood teak suitabe for Chair writing all as directed by Engr-in-Charge and as shown on drg.

M&L for removing unserviceable broken front legs and supply and fix new front leg made out of 1st class hard wood teak suitable for Chair writing all as directed by Engr-in-Charge and as shown on drg.

M&L for removing unserviceable broken side/front/back Canning patti of chair and supply and fix new side/front/back canning made out of 1st class hard wood teak and provide 3mm dia holes at a spacing of 10mm to 12.5mm centre to centre along the length of caning patti for the purpose of canning suitable for Chair writing all as directed by Engr-in-Charge and as shown on drg.

M&L for removing unserviceable broken arms rest left or right of chair and supply and fix new arms rest left or right made out of 1st class hard wood teak shape and size suitable for Chair writing all as directed by Engr-in-Charge and as shown on drg.

M&L for removing unserviceable broken bottom stiffiner centre or side from chair writing and supply and fix new bottom stiffiner centre or side made out of 1st class hard wood teak wood all as shown in drg and as specified and directed by Engr-in- Charge.

M&L for removing unserviceable broken rear legs top stiffiner from chair writing and supply and fix new rear leg top stiffiner made out of 1st class hard wood teak wood all as shown in drg and as specified and directed by Engr-in-Charge.

M&L for removing unserviceable broken triangular bracket 60x60x25 mmr from chair writing and supply and fix new triangular bracket 60x60x25 mm made out of 1st class hard wood teak wood all as shown in drg and as specified and directed by Engr-in-Charge

M&L for removing unserviceable broken Nylon Buffers shoes from chair writing and supply and fix new tNylon Buffers shoes all as shown in drg and as specified and directed by Engr-in-Charge S&F Nylon Buffers shoes fixed in repairs.

M & L For preparation of surfaces of old wooden polished surfaces with sand/ emery paper, well dusted of Char writting and applying minimum two coat or more of French polish of dark walnut shade as per approved quality to achieve uniform smooth texture and high glossy finish after filling holes with bees wax to Chair writting all as specified & as directed by Engr-in-Charge

REPAIRS TO CHAIR EASY

All as per srl item 11.01 here in before but for chair easy

All as per srl item 11.02 here in before but for chair easy

All as per srl item 11.03 here in before but for chair easy

All as per srl item 11.04 here in before but for chair easy

All as per srl item 11.05 here in before but for chair easy

All as per srl item 11.06 here in before but for chair easy

All as per srl item 11.07 here in before but for chair easy

All as per srl item 11.08 here in before but for chair easy

All as per srl item 11.09 here in before but for chair easy

REPAIRS TO CHAIR DINING

All as per srl item 11.01 here in before but for Chair Dinning

All as per srl item 11.02 here in before but for Chair Dinning

All as per srl item 11.03 here in before but for Chair Dinning

All as per srl item 11.05 here in before but for Chair Dinning

All as per srl item 11.06 here in before but for Chair Dinning

All as per srl item 11.07 here in before but for Chair Dinning

All as per srl item 11.08 here in before but for Chair Dinning

All as per srl item 11.09 here in before but for Chair Dinning

Chair Dinning FD-69/228, 279 PVC Seat

M&L for removing unserviceable PVC Seat and supply and fix new PVC Seat suitabe for Chair dinning all as directed by Engr-in-Charge and as shown on drg.

All as per srl item 11.01 here in before but for Chair Dinning PVC Seat

All as per srl item 11.02 here in before but for Chair Dinning PVC Seat

All as per srl item 11.05 here in before but for Chair Dinning PVC Seat

All as per srl item 11.06 here in before but for Chair Dinning PVC Seat

All as per srl item 11.07 here in before but for Chair Dinning PVC Seat

All as per srl item 11.08 here in before but for Chair Dinning PVC Seat

All as per srl item 11.09 here in before but for Chair Dinning PVC Seat

Chair WBB or BKB w/o arms FD-56, FD-285

M&L for removing unserviceable Seat made of plywood and supply and fix new plywood Seat suitabe for Chair dinning all as directed by Engr-in-Charge and as shown on drg.

All as per srl item 11.01 here in before but for Chair WBB or BKB w/o arms

All as per srl item 11.02 here in before but for Chair WBB or BKB w/o arms

All as per srl item 11.05 here in before but for Chair WBB or BKB w/o arms

All as per srl item 11.06 here in before but for Chair WBB or BKB w/o arms

All as per srl item 11.07 here in before but for Chair WBB or BKB w/o arms

All as per srl item 11.08 here in before but for Chair WBB or BKB w/o arms

All as per srl item 11.09 here in before but for Chair WBB or BKB w/o arms

REPAIRS TO CHAIR DINNING OFFICER (DRG NO FD/MAP-II/04 AND FD/06/MAP-10) M&L for removing unserviceable/broken part and S&F new part made out of 1st class hard wood teak (Teak wood )duly shaped as per drg included tightening the joints by pinning,screwing ,nailing glueing and placing every part intact all as specified in drg and Engr-in-Charge and as shown on drg.

S&F New Cushion 75mm thick 40 density with fabric fixed in repair on seat of 12mm thick ply of approved colour and quality

Stiffeners as specified in the drawing

Front/back/ side rail as specified in the drawing

Back support as specified in the drg

S&F triangular bracket 75x75x75 mm as per drg fixed in repair

S&F new hard PVC shoe with screw & washer complete all as specified.

Rear leg as specified in the drawing

Front leg as specified in the drawing

M & L For preparation of surfaces of old wooden polished surfaces with sand/ emery paper, well dusted of Char writting and applying minimum two coat or more of French polish of dark walnut shade as per approved quality to achieve uniform smooth texture and high glossy finish after filling holes with bees wax to Chair dinning officer all as specified & as directed by Engr-in-Charge

REPAIRS TO TABLE CENTRE FD-274/29(M)/235

M & L For preparation of surfaces of old wooden polished surfaces with sand/ emery paper, well dusted of Table Centre wooden and applying minimum two coat or more of French polish of dark walnut shade as per approved quality to achieve uniform smooth texture and high glossy finish after filling holes with bees wax to Chair writting all as specified & as directed by Engr-in-Charge

Taking out old unserviceable top and S&F new top of pre-laminated particle board 18/19 mm thick exterior grade as per approved shade make NOVAPAN/ARCHID LAM/KIT LAM ISI marked of existing size and 4 mm thick teak wood edging all around for table top complete all as specified directed by Engineer-in-Charge.

Taking out old unserviceable broken long rails and S&F new long rails of 1st class teak wood (Teak) as per existing shape and size duly planned and finished including tightening of joint complete all as directed by Engineer-in-Charge.

Taking out old unserviceable broken short rails and S&F new short rails of 1st class hard wood (Teak) as per existing shape and size duly planned and finished including tightening of joint complete all as directed by Engineer-in-Charge.

Taking out old unserviceable broken legs and S&F new legs of 1st class hard wood (Teak) as per existing shape and size duly planned and finished including tightening of joint complete all as directed by Engineer-in-Charge.

S&F new hard PVC shoe with screw & washer complete all as specified.

REPAIR TO TEAPOY FD WOODEN FD-382

Removing of old unserviceable existing table top and S&F new table top pre-laminated particle board of 18/19mm thick as per approved shade BWP exterior grade of of make NOVAPAN/ARCHID LAM ISI marked including 4mm thick teak wood beading all around table top of Teapoy complete as per approved colour and shade all as directed by Engineer-in-Charge.

M & L for removing unserviceable/ broken legs and S & F new legs made out of first class teak wood suitable for repair to Teapoy all as specified and directed by Engr-in-Charge.

All as per srl item 5(f) here in before but long Rail/Stiffener/side rails

S&F new hard PVC shoe with screw & washer complete all as specified.

M & L For preparation of surfaces of old wooden polished surfaces with sand/ emery paper, well dusted of teapoy wooden and applying minimum two coat or more of French polish of dark walnut shade as per approved quality to achieve uniform smooth texture and high glossy finish after filling holes with bees wax to Teapoy wooden all as specified & as directed by Engr-in-Charge

Sofa set 5 seater with Arms Drg No. FD-258, 281, 373,CWE(B)FD/0607

g) Replacement of U/S 1 st class HW front/rear rail of 3 seater of as per Drg.

h) Replacement of U/S side rail of 3 seater of as per Drg.

Replacement of U/S 1 st class HW Arms as per Drg.

f) Replacement of U/S 1 st class HW front/rear/side rail of single seater of as per Drg.

S&F 1 st class HW front / rear leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.

Replacement of U/S 1 st class HW Batten of seat and back as per Drg.

M&L replacement of un-serviceable cushion with new U Foam cushion 100 mm thick 40 density (Make: Sleepwell/Kurlon/Coolfoam) as per drg.

Opening & Taking out old Unserviceable Cushion cover and Supply & Fix new coushion cover made out of approved tapestry cloth not less than Rs 250/-per mtr of 48" wide duly stiched with fine thread all as specified and directed in respective drgs.

S&F Nylon Buffers shoes fixed in repairs.

M & L For preparation of surfaces of old wooden polished surfaces with sand/ emery paper, well dusted of Sofa set five seater and applying minimum two coat or more of French polish of dark walnut shade as per approved quality to achieve uniform smooth texture and high glossy finish after filling holes with bees wax to sofa set five seater all as specified & as directed by Engr-in-Charge

Sofa Chair Single seater with Arms Drg No. 281,

M & L For preparation of surfaces of old wooden polished surfaces with sand/ emery paper, well dusted of Sofa Chair single seater and applying minimum two coat or more of French polish of dark walnut shade as per approved quality to achieve uniform smooth texture and high glossy finish after filling holes with bees wax to sofa Chair single seater all as specified & as directed by Engr-in-Charge

M&L replacement of un-serviceable cushion with new U Foam cushion 100 mm thick 40 density (Make: Sleepwell/Kurlon/Coolfoam) as per drg.

Opening & Taking out old Unserviceable Cushion cover and Supply & Fix new coushion cover made out of approved tapestry cloth not less than Rs 250/-per mtr of 48" wide duly stiched with fine thread all as specified and directed in respective drgs.

Sofa set 4 seater with Arms Drg No. FD-258, 281, 373

M & L For preparation of surfaces of old wooden polished surfaces with sand/ emery paper, well dusted of Sofa set Four seater seater and applying minimum two coat or more of French polish of dark walnut shade as per approved quality to achieve uniform smooth texture and high glossy finish after filling holes with bees wax to sofa Chair single seater all as specified & as directed by Engr-in-Charge

S&F 1 st class HW front / rear leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.

Replacement of U/S 1 st class HW Arms as per Drg.

f) Replacement of U/S 1 st class HW front/rear/side rail of single seater of as per Drg.

M&L replacement of un-serviceable cushion with new U Foam cushion 100 mm thick 40 density (Make: Sleepwell/Kurlon/Coolfoam) as per drg.

Opening & Taking out old Unserviceable Cushion cover and Supply & Fix new coushion cover made out of approved tapestry cloth not less than Rs 250/-per mtr of 48" wide duly stiched with fine thread all as specified and directed in respective drgs.

S&F Nylon Buffers shoes fixed in repairs.

REPAIRS TO BED PLYWOOD TOP FD-247 & FD-246

M & L for removing unserviceable / broken leg from bed plywood top and S & F new leg made out of 1st class teak wood and made to shape and all as shown on drg and as directed by Engr-in-Charge.

M & L for removing unserviceable plywood from Head board of Bed plywood top and S & F new 4mm thick plywood one side teak face ( Natural teak) to both side of Head board including 15mm wide 6mm thick teak wood round beeding providing for both side of head board and 35mm wide 4mm thick teak wood beeding for top of head board and all as specified and as directed by Engr-in-Charge.

M & L for removing unserviceable plywood from Foot board of Bed plywood and S & F new 4mm thick plywood one side teak face ( Natural teak) to both side of Foot board including 15mm wide 6mm thick teak wood beeding providing both side of Foot board and 35mm wide 4mm thick teak wood beeding for top of the head board and all as specified and as directed by Engr-in-Charge.

M & L for removing unserviceable long rail from Bed plywood top and S & F new long rail made out of 1st class teak wood and made to shape and al as specified and as directed by Engr-in-Charge.

M & L for removing unserviceable centre rail from Bed plywood top and S & F new centre rail made out of 1st class teak wood and made to shape and al as specified and as directed by Engr-in-Charge.

S & F triangular shape corner bracket size 75X 75mm long and 25mm thick made out of 1st class teak wood to be fixed to legs to long rail of bed plywood top with 50mm wood screw 2 Nos for each bkt and all as directed by Engr-in-Charge.

M & L for removing old unserviceable/ wornout existing plywood top from Bed plywood top and S & F new 12mm thick plywood BWR grade Type AA of size 1940 X 915mm approved make and fixing it by minimum 18 Nos 30mm brass screw for each bed and all as specified and as directed by Engr-in-Charge.

M & L for polishing of bed plywood top with french polish for obtaining glossy finish including preparation of wooden surfaces by scrapping with sand paper & apply putty whereever required and as directedby Engr-in-Charge.

Table 900X600mm Wooden with Drawer FD-41,224

M & L For preparation of surfaces of old wooden polished surfaces with sand/ emery paper, well dusted of Sofa set Four seater seater and applying minimum two coat or more of French polish of dark walnut shade as per approved quality to achieve uniform smooth texture and high glossy finish after filling holes with bees wax to sofa Chair single seater all as specified & as directed by Engr-in-Charge

S& F Top with 18/19mm prelaminated board Extrior Gde both side laminated of approved shade with 6mm thick teakwood beeding duly french polished including taking down old top as directed by Engineer-in-Charge.

S&F 1 st class hw Leg as per drg including taking down old leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class hw long Rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW short Rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW Long Stiffener as per drg Including taking down old stiffner complete all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW short Stiffener as per drg Including taking down old stiffner complete all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW drawer as per drg Including taking down old drwaer complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Knob as per drg.complete all as specified and as directed by Engineer-in-Charge.

S&F new hard PVC shoe with screw & washer complete all as specified

Table 900X600mm wooden without Drawer FD-55/284/224/41(M)

M & L For preparation of surfaces of old wooden polished surfaces with sand/ emery paper, well dusted of Sofa set Four seater seater and applying minimum two coat or more of French polish of dark walnut shade as per approved quality to achieve uniform smooth texture and high glossy finish after filling holes with bees wax to sofa Chair single seater all as specified & as directed by Engr-in-Charge

S& F Top with 18/19mm prelaminated board Extrior Gde both side laminated of approved shade with 6mm thick teakwood beeding duly french polished including taking down old top as directed by Engineer-in-Charge.

S&F 1 st class hw Leg as per drg including taking down old leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class hw long Rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW short Rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW Long Stiffener as per drg Including taking down old stiffner complete all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW short Stiffener as per drg Including taking down old stiffner complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Knob as per drg.complete all as specified and as directed by Engineer-in-Charge.

S&F new hard PVC shoe with screw & washer complete all as specified

REPAIR TO PEG TABLE FD 384

M & L For preparation of surfaces of old wooden polished surfaces with sand/ emery paper, well dusted of peg table and applying minimum two coat or more of French polish of dark walnut shade as per approved quality to achieve uniform smooth texture and high glossy finish after filling holes with bees wax to peg table all as specified & as directed by Engr-in-Charge

M & L for removing unserviceable/ broken legs and S & F new legs made out of first class teak wood suitable for repair to Peg Table all as specified and directed by Engr-in-Charge.

Removing of old unserviceable existing table top and S&F new table top pre-laminated particle board of 18/19mm thick as per approved shade BWP exterior grade of make NOVAPAN/ARCHID LAM ISI marked including 4mm thick teak wood beading all around table top of Peg Table complete all as directed by Engineer-in-Charge.

Removing of old unserviceable long rail and S&F new long rail of 1st class hard wood (TW) as per existing shape and size to peg table complete all as specified and directed by Engineer-in-Charge.

S&F new hard PVC shoe with screw & washer complete all as specified.

M/s Jagdish Machinery Stores (BID ID -3208294)