Loading
Loading…
Loading…
Tender Value
₹1.7 L
EMD Value
₹3,386
Closing Date
20 May 2026, 3:00 pmClosed
Executive Engineer
Executive Engineer Mechanical Division
Providing Installation and Commissioning of three 3 no of 1 5 TR 2 0 TR High wall Split type Air Conditioning system at DOTS Centre of AGMC GBP Hospital Agartala
2026_CEPWD_72731_1
19_EE_DNIT_MECHDIVN_AGT_202627
Open Tender
Electrical Works
Works
30 days
Agartala
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,000
₹3,386
9 Jun 2026
11 May 2026
20 May 2026
11 May 2026
20 May 2026
11 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Providing star rated (5 star with applicable ISEER according to current industry standard) high wall split type AC machine (Condenser & evaporator coil pipe should be made of copper) and technical specification with hermetically sealed compressor operating on non CFC refrigerant, pipe as supplied with AC machine, necessary plug top for IDU (With 01 year overall machine and compressor warranty) suitable for wall mounting conforming to IS 1391(Part-II) specification (Except power consumption) suitable for operation on 230 volt, 50 Hz, single phase AC supply capable of performing a) Cooling b) Dehumidifying c) Air circulating d) Filtering having rated cooling capacity. | |||||
| 1.01 | 1.5 TR high wall split type AC machine (Minimum rated cooling capacity should not be lsss than 4500 Kcal/hr or 18000 BThu/hr or 5250 watt). | 2 | Nos | - | - |
| 1.02 | 2.0 TR high wall split type AC machine (Minimum rated cooling capacity should not be lsss than 6000 Kcal/hr or 24000 BThu/hr or 7000 watt). | 1 | No | - | - |
| 2 | Standard installation, testing and commissioning of 1.5 / 2.0 TR high wall split type AC machine, including hole cutting, finishing etc. as per direction of the Engineer-in-charge. | 3 | Nos | - | - |
| 3 | Fabrication of M.S platform for placement of condensing unit by using M.S angle of (50x50x5) mm size base plate, nuts and bolts/ universal bracket (GSS) for ODU of 1.5 / 2.0 TR high wall split type ACs including all accessories for onsite installation i/c painting, fitting, fixing, grouting by cement mixture as per direction of the Engineer-in-charge. | 3 | Nos | - | - |
| 4 | Supply, installation of additional length of copper pipe of appropriate size of (5/8" (15.88 mm), 1/4”(6.35 mm), 3/8” (9.53 mm) and 3/4”(19.05 mm) or nearest dia. as per manufacturer design for both suction and liquid line with insulation and necessary wiring between indoor and outdoor units suitable for 1.5 / 2.0 TR high wall type / 3.65 TR floor mounting vertical Split type ACs. | 10 | Mtrs | - | - |
| 5 | Providing hard PVC pipe of best quality of 25 mm diameter including necessary clamping and fitting for draining of condensate water from indoor unit as per direction of the Engineer-in-charge. | 20 | Mtr. | - | - |
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 0.23 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.63 MB
DNIT.pdf
Tender Documents • 3.19 MB
BOQ_74013.xls
BOQ • 0.23 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .