Construction of Sub-Centre Building at Siala under Krushnaprasad Block in the District of Puri for the year2023-24

Earth Work in excavation for foundation hard soil with all leads and lifts including all labour, T&P articles, safety measures, incidentals, dewatering, removal of stumps and other deleterious materials and disposal up to a lead of 50mtr, dressing of side and bottom as necessary for the work etc.complete as per direction of the Engineer-in-charge.

Providing and filling foundation and plinth with good coarse river sand of approved quality including watering and ramming with cost conveyance, royalities, taxes of the materials and labour with T&P required for the work etc. complete as per specification and direction of the Engineer-in-Charge.

Providing and laying Cement concrete of proportion (1:3:6) in foundation using 40mm nominal size clean black hand broken granite stone metal of approved quality from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15cm thick to the required level, ramming, watering, curing etc. complete including cost and conveyance of all materials with all taxes and royalities and labour with T&P required for the work etc. complete as per direction of the Engineer-in-charge.

Fly ash brick masonry in foundation and plinth in cement mortar (1:6) using fly ash Bricks having a crushing strength of not less than 75kg/cm2 including splays, cutting , circular moulding chamfering and corbelling watering and curing after immersing the bricks in water for six hours before use with watering, curing including cost, conveyance , royality taxes of all materials labour with T&P required for the work etc. complete as per specification and direction of the Engineer-in-Charge.

2.5cm thick damp proof course with Cement concrete (1:2:4) using 12mm.size hard crusher broken granite chips including cost, carriage,royality, taxes of all materials labour with T&P required for the work etc. complete as per specification and direction of the Engineer-in-Charge.

R.C.C. work of M-30 grade with 20mm sizedown grade H.G.C.B chips including hoisting lowering and laying concrete, ramming in layers not exceeding 15cm thick compacting by means of vibrator ,curing ,finishing the exposed surface smooth, dewatering ,shoring ,shuttering if necessary at the time of laying concreat including cost, conveyance royality taxes of all materials labour with T&P required for the work etc. complete as per specifiation and direction of the Engineer-in-Charge.

Column Base

Plinth Bend

Lintel(G.F)

Lintel(F.F)

Lintel(S.F)

Chhajja(G.F)

Chhajja(F.F)

Roof Beam & Column(G.F)

Roof Beam & Column(F.F)

Roof Beam & Column(S.F)

Roof Slab(G.F)

Roof Slab(F.F)

Roof Slab(S.F)

Staircase(G.F)

Staircase(F.F)

Supplying, cutting, bending, straightgening, placing & binding of uncoated HYSD bar reinforcement as per drawing & technical specification with cost, conveyance & royalities of all materials, labour with T&P required for the works etc. complete as per direction of the Engineer-in-Charge.Ground Floor

First Floor

Second Floor

Fly ash brick masonry in cement mortar (1:6) using fly ash Bricks having a crushing strength of not less than 75kg/cm2 including splays, cutting , circular moulding chamfering and corbelling watering and curing after immersing the bricks in water for six hours before use with watering, curing including cost, conveyance , royality taxes of all materials labour with T&P required for the work etc. complete as per specification and direction of the Engineer-in-Charge.In Super-structure(G.F)

In Super-structure(F.F)

In Super-structure(S.F)

Providing & Fixing Vetrified tile in floor on 20mm thick bed(1:4) c.m Jointed with cement slury mixed with pigment to match the shade of the tiles including rubbing & polishing complete including cost of tiles (Plain Ivory).Ground Floor

First Floor

Providing and fixing Vetrified tiles in Wall or dados with 12mm thick cement mortor (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles inlcuding rubbing and polishing with all cost, conveynace, taxes of tiles labour with T& P required for the work etc. complete as per specification and direction of the Engineer-in-Charge.Ground Floor

First Floor

6mm thick cement plaster with cement mortar (1:4) RCC surface finished smooth including closed deep chiping and slurry treatment with Ordinary Portland Cement (OPC) and using good coarse river sand of approved quality finished smooth over brick masonary after racking out joints including watering & curing with cost, conveyance, royalty, taxes of all materials & labour with T&P required for the work etc. complete in all respect as per specification and direction of the Engineer-incharge.Ground Floor

First Floor

16mm thick cement plaster (1:6) finished smooth to inside brick wall surface after racking out the joints including watering and curing with cost, conveyance, royality, taxes of all materials and labour with T&P required for the work etc. complete in all respect as per specification and direction of the Engineer-in-Charge.Ground Floor

First Floor

Second Floor

12mm thick cement plaster (1:6) finished smooth to outside brick wall surface after racking out the joint including watering and curring with cost ,conveyance, royality, taxes of all materials and labour with T&P required for the work etc. complete in all respect as per specification and direction of the Engineer-in-Charge.Ground Floor

First Floor

Second Floor

20mm thick cement plaster with cement mortar (1:6) using good coarse river sand of aproved quality finished smooth over brick masonary after racking out joints including watering & curing with cost, conveyance, royalty, taxes of all materials & labour with T&P required for the work etc. complete in all respect as per specification and direction of the Engineer-incharge.

Finishing walls with Weather coat paint over one coat of priming of approved shade on new work/old work two coats to give an even shade including scaffolding, staging charges with cost, convyeyance, taxes of all materials, labour with T&P required for the work etc. complete as per specifiation and direction of the Engineer-in-Charge.Ground Floor

First Floor

Second Floor

Finishing wall surface of walls with Acrylic wall putty (water based) with 2 coats of plastic Emulsion paint over a coat of priming of approved made & finished smooth and even surface to receive painting over a coat of white cement primer including scaffolding, staging charges with cost, conveyance, taxes of all materials, labour with T&P required for the work etc. complete as per specifiation and direction of the Engineer-in-Charge.Ground Floor

First Floor

Wall painting two coats to walls with plastic emulsion paint of approved shade on new work over one coat of priming to give an even shade including cost of paint per 1 sqm with cost, conveyance, taxes of all materials, labour, T&P etc. required for the work complete as per direction of the Engineer-in-Charge.Ground Floor

First Floor

Providing, fitting and fixing of M.S. Door, M.S Windows, M.S. Grills ,M.S. Grill Gate and Collapsible Gate with top and bottom rails in proper position including making holes in walls, RCC structure including mending, or cutting to sizes or grooves in walls and fixing with CC (1:2:4) with hard black crusher broken granite stone chips of 12mm with cost ,conveyance, royality, taxes of all materials, labour with T&P required for the work etc. complete in all respect as per specification and direction of the Engineer-in-Charge.

Painting 2 coats to the new surface of wood and iron works over a coat of priming and two coat with any approved shade of paint including cost, conveyance & royalities of all materials, labour with T&P required for the works etc. complete as per specification and direction of the Engineer-in-Charge.Ground Floor

First Floor

Supplying, fitting & fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mmx32mmx2mm @ 0.90mtr C/C & stainless square pipe bracing of size 32mmx32mmx2mm in 3rows in stair case as per approved design & specification , buffing, polishing etc. with cost, conveyance, taxes of all materials, labour, T&P etc. required for the work complete in all respect as per specifiation and direction of the Engineer-in-Charge.

Providing 2.5cm (1") thick grading concrete with C.C. (1:2:2) on roof slab using 6mm size h.b.g. chips including watering, curing, all cost, conveyance, royality and taxes of all materials, labour with T&P required for the work etc. complete as per specification and direction of the Engineer-in-Charge.

Supplying,fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame,shutters and all fitting and fixtures.

Supplying,fitting and fixing of openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame,shutters and all fitting and fixtures.

PH Work- Earth work in all kinds of soil in excavation of foundation trenches within 50m initial lead including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30 in depth and depositing the soil as per direction of EIC.Initial lift upto 1.50m.3.05 * 1.95 * 1.50

Supplying all materials, labour T&P and filling in F&P with river sand well watered and rammed including conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC.3.05 * 1.95 * 0.15

Supplying all materials labour T&P and providing c.c. (1:3:6)using 4cm hg metal including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC.3.05 * 1.95 * 0.10 = 0.594 Cum

Supplying all materials labour, T&P and providing c.c. (1:1.5:3) using 12mm hg chips including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC.2.00 * 0.90 * 0.038 = 0.068 Cum

Supplying all materials labour T&P and providing brick work with Fly ASh Bricks having c. s. not less than 75Kg/cm2 with dimensional tolerance +-8% in cm (1:3)including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and dir of EICIn F&P in cm (1:4).2 * ( 2.75 + 0.90 ) * 0.375 * 0.75 = 2.053cum

Supplying all materials labour T&P and providing c.c. (1:1.5:3) using 12mm hg chips for RCC works including hoisting laying, watering, curing, conveyance of all materials to work site payment of royalty taxes etc. all complete as per specification and direction of EIC.2.50 * 1.40 * 0.10 =0.35 cum

Supplying all materials labour T&P and providing MS reinforcement for RCC works including cutting, bending, binding and tying the grills and placing in position including cost of binding wire and 18 to 20 gauge conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC.-

Supplying all materials labour T&P and providing rigid and smooth centering and shuttering for RCC works including false work and dismantling them after casting including conve4yance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC.2 * ( 2.50 + 1.40 ) * 0.10 = 0.78 sqm

Supplying all materials labour T&P and providing cement plaster on brick/stone work including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC.12mm thick CP (1:3).2 * ( 2.50 + 1.40 ) * 0.30 = 2.34 sqm

Supplying all materials labour T&P and providing cement punning including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC.Same as above item 20mm C.P in 1:3

Supplying all materials labour T&P and providing cement flush pointing to brick masonry (1:3) including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC.2 * ( 2.75 + 1.65 ) * 0.75 = 6.60 Sqm

Filling F&P with excavated materials including watering and ramming as per direction of EIC

Supplying all labour materials T&P and fixing of 2” RCC baffle wall precast with cc (1:1.5:3) using 12mm bhg chips for fitted to septic tank as per PH specification and direction of EIC.1.15 * 0.45 m

Supplying all materials labour T&P and providing fitting and fixing SW Tee in wall including filling the necessary with cement concrete (1:2:4) with 12mm size hg chips all complete materials to as per specification and dir of EIC.100x100x100mm PVC Tee/Y

Supplying all labour materials T&P and fixing of MS step iron in 12mm dia MS steel bar and fixing into walls of septic tank duly embedded in c.c. (1:3:6) all complete as per PH specification and direction of EIC-

Supplying all labour materials T&P fitting fixing of door frame made ouf PVC profiles joined to the horizontal after insenting MS/Fiber ‘L’ angles of size 200x100mm and self tapping screws A one meter run reinforcement provided along the sheet of the frame where the door is to be hanged. It is to be fixed to the walls with steel screws and rawal plugs all complete as per the dir of EIC

Supplying all materials labour T&P and fixing porcelain glazed tiles/Marble tiles /Kota /Kodappa tiles in dados skirting on 12mm thick cp (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rub bins and polishing complete as per direction of EIC.G.FLOOR

First Floor Wall

Supplying all materials labour T&P and fixing Ceramic tiles in floors. Treads and landing on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the3 shades of the tiles including rub bins and dir of EIC. G.FLOOR

First Floor

Supplying all materials labour T&P and providing painting two coats with approved cement paint on plastered surface etc. all compt as per specification and direction of EIC.

Supplying all materials labour T&P and cutting holes through brick/stone masonry works including making good the damages in cm (1:4) for taking H.C.I/PVC pipes and fittings etc. all complete as per PH specification and direction of EIC.250mm thick wall

375mm thick wall

Supplying all materials labour T&P and cutting holes through brick/stone masonry works including making good the damages in cm (1:4) for taking G.I/PVC pipes and fittings etc. all complete as per PH specification and direction of EIC. Groove cutting through wall & floor -

Supplying all materials labour T&P and fixing water closet, squatting pan (Indian type WC pan/Orissa pattern squatting pan) duly embedded in cc(1:5:10) using 4cm hg metal all compt. As per direction of EIC. 580mmx440mm size White Orissa pan

EWC with Seat Cover

Supplying all materials labour T&P and fitting & fixing UPVC SWR soil waste ventilating pipes and fittings of the following OD conforming to ISI No.13591/1992 to walls with nails bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method as per manufacturers specification testing e. w. in excavation in all kinds of soil and refilling of trenches as per direction of EIC.110mm dia UPVC SWR Pipe

110mm dia U-PVC P. Trap

110mm U-PVC S/J with Door

110mm U-PVC D/J with Door

110mm U-PVC door bend

110mm dia U-PVC Plain bend

110mm dia U-PVC Plain tee

110mm U-PVC Cowl

125mm dia CP Grating

75mm dia U-PVC SWR Pipe

75mm U-PVC Plain tee

75mm U-PVC door Bend

75mm U-PVC Plain Bend

Supplying all materials labour T&P and fixing wash kitchen sink/laboratory sink with CI/MS brackets painted white including holes in walls and making good the damages etc. all complete as per PH sp and dir of EIC.610x510x200 mm Stainless Steel kitchen Sink

Supplying all materials labour T&P and fixing wash basins with hole for pillar taps with CI/MS brackets painted white including holes in walls and making good the damages etc .all compt. As per PH sp. And dir. Of EIC.550x400mm WHB

Supplying all materials labour T&P and fixing mirror of superior glass mounted on 6mm thick AC sheet or plywood sheet and fixed to wooden plugs with cp screws and washers compt. As per PH specification and direction of EIC.Rectangular Plastic Frame Mirror

Supplying all materials labour T&P and fixing standard size cp towel rail/ring compt. with cp brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of EIC. CP Towel rail

CP Towel ring

Supplying all materials labour T&P and fixing standard size cp soap holder compt. With cp brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of EIC. CP soap holder

Supplying all materials, labour T&P and fitting and fixing C.P shower with 15mm or 20 mm inlet with C.P shower arm including polishing all complete as per P.H. specification and direction of EIC15mm dia cp revolving shower .

Supplying all materials, labour T&P and fitting and fixing Acraylic shelf including polishing all complete as per P.H. specification and direction of EIC.450mmx125mm size Plate Acraylic Shelf

Supplying all materials labour T&P and fitting and fixing 10 ltr capacity low level flushing cistern with a pair of cast iron or m.s. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float, c.p. brass handle, unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia cp foush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main etc. all complete as per specification and direction of EIC. 10ltr Capacity Cistern

Supplying all materials labour T&P and constructing gully trap chamber of the following inside size with 8cm thick RCC precast cover slab in cc (1:1.5:3) using 12mm size hg chips foundation concre3te(1:3:6) using 40mm size hg metal on bed and around trap KB Brick work in cm (1:6) in F&P and inside 12mm thick cp (1:3) finished with a floating coat of neat cement including fixing 100mm size HCI gully trap and grating etc. all complete as per approved drawing specification and dir of EIC.Inside size 250mmx250mm gully trap

Supplying all materials, labour T&P and construction of Inspection chamber of the following sizes with c.c.(1:3:6) using 40mm size hg metal on bed, Ist class KB Brick work in cm(1:6) moulding and shaping the channel inside and benching with c.c. (1:1.5:3) with punning to inside cement flush pointing (1:3) to outside RCC cover slab in cc (1:1.5:3) using 12mm size hg chips with RCC m. h. cover, e. w. in excavation in all kinds if soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to site payment of royalty taxes etc. all complete as per approved specification and direction of EIC.Inside size : 760 x 760 x 460mm Inspection Chamber

Supplying all materials labour, T&P and constructing soak way pit of the following sizes with precast RCC rings joined loose gravel backing in the rear of well staining, precast RCC cover slab in c.c. (1:2:4) USING 2mm size hg chips fitted with iron lifting handles including e. w. in open well excavation in all kinds of soil and refilling the cavity around the pit and painting the iron works watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per approved drawing, specification and direction of EIC.0.91m dia x 2.10m deep

Supplying all labour materials T&P and laying of UPVC soil waste pipe of the fo0llowing internal diameter confirming to IS in trenches of the depth upto 1.2mtr including jointing with supply of approved rubber, lubricant by non heat application method on bending with 150mm thick cc (1:3:6) using hg metal of 25mm to 40mm and then making all-round encasing including earth work excavation in all kinds of soil, refilling the trenches watering, curing, conveyance of all materials to site payment of royalty, taxes etc. & testing all complete as per PH sp and dir of EIC. 110mm dia with allround encasing

Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor testing all complete as per specification and dir of EIC.20mm dia C-PVC pipe

25mm dia C- PVC Pipe

40mm dia C-PVC Pipe

Supplying all Materials labour T&P and fitting and fixing brass/CP Fittings of the following nominal bore with supply of all jointing materials etc. complete as per PH Specification and Direction of EIC. 15mm dia CP pillar cock

20mm dia cp concealed stop cock

15mm dia cp angle stop cock

15mm dia cp bib cock S.B.

15mm dia cp bib cock L.B.

15mm dia CP Two way angle/bib Cock

25mm dia PVC Valve

32mm dia PVC Valve

Health Fuccet

15mm dia CP flange

15mm dia CP Extension piece

Supplying all materials labour T&P and fixing water storage sintex tanks including and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting and placing the to the required position, including cost of tank conveyance and taxes of all materials to work site etc. all complete as per PH specification and direction of EIC. ( 1000 lit sintex tank)

Supplying all materials labour T&P and construction of masonry staging with providing 1st KB brick work in cm (1:6) of 0.40mtr height in staging and in circular protection wall to support to the tank 12mm thick cement plaster in cm (1:4) over brick work RCC beam of 2.61 x 0.25x0.30 using cc (1:1.5:3) using 12mm chips including centering and shuttering curing, conveyance of all materials to work site etc. all complete as per sp and dir of EIC.1000 ltr capacity

Transportation of tube well materials supplying all materials labour T&P and including transportation of boring equipments etc. all comp as per dir of EIC

Supplying all materials labour T&P and setting up boring equipments including erection of suitable staging for installation of required size of tube well dismantling and removing the same after completion of the work including transportation of boring equipments, cleaning and leveling the site excavation of mud pit channels, etc. all comp as per dir of EIC.

Supplying all materials labour T&P and drilling pilot bore not less than 102 mm dia without casing pipes in all kinds of soil and rocks for the following depths excluding supply of necessary boring pipes including supply of necessary cutting equipments extra sockets etc withdrawing the boring pipes, washing and keeping the bore clear for logging if required all comp as per dir of EIC. From 0 mtr to 360mtr

Supply all material labour T&P and lowering the PVC casing pipes, fittings and well screens in position including fitting and fixing of centralizer cutter plug and washing the bore as per dir of EiC. 50mm dia PVC Lowering

50mm dia PVC Pipe

50mm dia PVC Strainer

Plug Cutter.

Cleaning and developing the tube well with 8 hour pumping for seven consecutive days or till clean and adequate discharge obtained from the tube well including supply and use of all necessary equipment & labour as per dir of EIC.

Supplying of all materials labour T&P and fitting and fixing of maya pump set with all fitting and as per sp and dir of EIC.

Supplying of all material labour T&P and for construction of tube well platform as per specification and direction of EIC.

Supplying all material, T&P for fixing 1.00 HP centrifugal Pump set includes construction of foundation fixing with foundation, foundation bolt making connection to the suction and delivery pipe lines supply and fixing of required G.I Bend, G.I short piece including transportation of pump G.I fitting and related transportation of pump G.I fitting and related items to the work site. Testing and commissioning of pump set etc. All complete as per specification and direction of EIC.

Please Enable Macros to View BoQ information