Notice Inviting e-Tender No. 28/EE(R and B)/NKDA/2026-27

Restoration of Street

Bituminous Macadam Providing and laying bituminous macadamwith 100-120 TPH hot mix plant using crushed aggregates of specified grading premixed with approved bituminous binder @3.3% (min)for Grading-1and 3.4% (min) for Grading-2 by weight of total mix, transported to site, laid over a previously prepared base with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction (Reference to MORT&H's specification clause 504). for Grading II (19mm nominal maximum aggregate size) Layer Thickness 50-75mm By Mechanical Means

Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder of approved grade@ 5.2% (min) for Gr.-1 & @ 5.4% (min) for Gr.-2 , as per table 500-17, and mix design done as per table 500-10 and job mix formula as per cl. 505.3.3 and filler(Cement /hydrated lime / Rock dust ), transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory tandem roller and with pneumatic tyre roller of 12 to 15 tonne weight with a pressure at least 0.56 MPa as directed by E-I-C to achieve the desired compaction as per clause no 507.3.5 complete in all respects ref. to MORTH specification clause No.507. for Grading-2 ( 13.2 mm nominal maximum aggregate size), Layer thickness:30-40mm

Providing and applying tack coat with Cationic bitumen emulsion (MS) complying with IS:8887 using emulsion pressure distribution the prepared bituminous/granular/cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503).( For Bituminous surface ).

Add @ GOOD SERVICE TAX ( SL No. 02 to 04)