GE/863/EWS-T-65/2019-20

Amount

Demolition of stone/boulder masonry brick / PCC Block masonry stone masonry built in CM including all quoins, arches, piller complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n.exc 15 cm thick above or below GL complete all as specified and directed.

M&L for Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft/loose soil.

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m deep and getting out in hard / dense soil complete all as specified and directed by Engr-in-Charge.

M&L for Returning, filling in, including spreading, levelling, watering, and well ramming in layers n. exc. 25 cm thick complete all as specified.

M&L Excavating in post holes in hard/dense soil (or similar holes) each n exc 0.5cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surface

M&L for sand cushion 25 mm under floor or foundation complete all as specified and directed.

M&L for Removing excavated material (soil) n. exc. 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified.

M&L Boulder or broken stone fillings, and packing (any thickness) at back of wall and raising (or lowering) to be required level as in agg stainer 300mmx300mmx300mm for weep holes complete all as specified and directed.

M&L for Hardcore or broken stone or boulders of gauge n. exc. 63 mm, deposited, spread and levelled in layers n. exc. 15 cm thick, watered and rammed to a true surface complete all as specified.

M&L for Cement concrete type D-2, 1:4:8 (40 mm graded stone aggregate) in foundation filling and mass concrete complete all as specified.

M&L PCC1:3:6 type C2 (40mm aggregate) in surface channels and drains walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified.

M&L PCC (1:2:4) type B1 using 20 mm graded stone agg as in surface channel and drain etc complete all as specified and directed.

M&L for providing plain cement concrete type C1(1:2:4) using 20 mm graded stone agg as in kerb stones, plinth course etc. including necessary form work complete all as specified and directed.

Material and labour Pre-cast cement concrete block masonry with solid blocks,type C-1, 1:3:6 (using mechanically crushed 20 mm graded stone aggregate) exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and as directed.

M&L for Reinforced cement conceret type B-1, 1:2:4 (20 mm graded aggregates), nominal mix in beams, cantilevers, bressummers, lintels complete all as specified & directed.

M&L for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

Add or deduct for each 25 mm girth or part thereof over or under 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc.

M&L for Walling of random rubble stone masonry, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified.

External angles (for quoins and jambs) in facings for walling of random rubble or polygonal rubble, uncoursed or brought upto courses and squared rubble masonry, regular coursed, Secunderabad and Bangalore types complete all as specified and directed.

Extra over for hammer dressing with maximum depression from a straight edge held against the surface not exc 40 mm dressing for granite or trap stone complete all as specified and directed.

Use & waste of formwork to sides and soffits of floor or roof beam, lintels, shelves including supports complete all as specified.

S&F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900) used instead of exposed portion of PVC sheet beading in the frame at site as per specification & drawing complete all as specified.

S&F Factory made solid panel pvc ventilator shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and fully glazed i.e. glass panes used instead of 5mm PVC sheet panels complete all as specified.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain PVC printed sheet & edges will be painted to match with printed sheet ,reinforced with M.S. Square tube, in opening as per specification & drawing complete all as specified

S&F Aluminium, anodised, barrel tower bolts of length 150 mm of extruded section and fixed complete all as specified.

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as speified.

S&F Butt hinges of size 100 mm, medium weight, cold rolled mild steel and fixed complete all as specified.

S&F Aluminium handles of size 150 mm, cast type, anodised complete all as specified.

Supply & Fix CP towel rail 20mm dia, 60 cm long D type fixed with wooden gutty and steel screws complete all as specified and as directed .

S&F Door closer aluminium hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified.

Supply & Fix GI wire cloth 0.56mm nominal dia of wire and 1.18 mm average width of aperture complete with beads etc. for door shutter/window shutter of any size/ type/thickness complete all as specified and as directed .

M&L for Mild steel TMT bars 10 mm dia. and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified.

Supply and fixing TMT bar 8 mm dia, cut to length, bent to shape required including cranking, hooking ends and binding with and including mild steel (annealed) wire not less than 0.9 mm dia or securing with clips etc all as specified and directed.

M&L for Mild steel TMT bars 6 mm dia. and over upto and including 10 mm dia in stirrups, spaces and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified.

S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated)of FE 410-W (Gde-E-250) quality A, including distance places, cleats etc. complete all as specified.

S&F rolled mild steel Fe -290(Gde E-165) for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.complete all as specified.

S&F rolled mild steel Fe -290(Gde E-165) for framework of water tank and similar work etc.complete all as specified.

S&F powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. (thickness of powder coating 50 micron), complete all as specified

S&F Powder coated not less than 50 micron Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

S&F 12mm Prelaminated particle board, exterior grade, with prelaminated both sides with decorative choice laminations, fixed with screws to frame work complete all as specified and as directed.

M&L for Cement concrete type C-2, 1:3:6 (40 mm graded aggregate), 50 mm thick, in plinth protection, finishing cement concrete surface even and smooth without using extra cement complete all as specified.

M&L for cement concrete type D-2, 1:4:8 (40 mm graded stone aggregate), 100 mm thick as in sub base of floor complete all as specified.

M&L for Glazed ceramic tiles, coloured, in vertical surfaces, 300 X 200 X 7 mm thick over and including 10 mm thick cement plaster in cement mortar 1:4 as backing of wall tiles etc., set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified.

M&L for Non – skid ceramic tiles, coloured, 7 to 8 mm thick (square/ rectangular) area of each tile exc. 0.11 Sqm but n. exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified.

M&L for machine pressed precast concrete interloking paver block of any shape and size conforming to IS 15658-2006 of 60 mm thick, M-35 grade with grey cememt and no pigment complete all as specified and directed.

All as per item No 48 above but with grey cement and pigment complete all as specified and directed.

M&L Reflective chequered cement concrete tiles 30cmx30cm x 25mm thick, With grey cement and pigments, set, jointed and pointed in neat cement slurry ,over and including 20 mm thick screed bed or bedding layer of cement mortar 1:6, over new or existing sub-base in floors complete all as specified and directed.

Material & Labour10mm thick rendering in CM 1:6 on fair face of brick work or concrete surface finished fair and even without using extra cement complete all as specified and as directed by Engr-in-Charge.

Material & Labour15mm thick rendering in CM 1:4 on fair face of brick work, PCC solid block masonary or concrete surface finished fair and even without using extra cement complete all as specified and as directed.

Flush pointing to random/rubbles walling in cement mortar 1:4 complete all as specified and directed.

M&L for two coats of cement base paint on undecorated, new plastered or unplastered surfaces of walls, including preparation of new surfaces complete all as specified and as directed.

Preparation of new wall surface, and applying three coat of White wash complete all as specififed and dircted by Engr-in-Charge.

S&F 5.5mm thick Sheet glass, ordinary quality and glazing with oil putty or beading in square exc 0.5 sq. m in each pane complete all as specified.

S&F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty or beading in square exc 0.5 sq. m in each pane complete all as specified.

M&L for Painting two coats on steel and iron surfaces of any description with synthetic enamel paint over one coat of red oxide on new or previously untreated surfaces exc. 10 cm width or grith including preparation of surface complete all as specified.

S&F 15 mm bore, steel water tubing, medium grade, galvanized, with all fitting and fixed complete to walls and ceiling or laid into floor complete all as specified.

S&F 20 mm bore, steel water tubing, medium grade, galvanized, with all fitting and fixed complete to walls and ceiling or laid into floor in repairs complete all as specified.

S&F 25mm GI Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified.

S&F 500 Ltrs capacity, rotational moulded double layered polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I complete all as specified.

S&F Rotational moulded polyethylene double layered water storage tanks capcity 1000 ltr (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified.

S&F Bib taps, cast copper alloy, fancy type, chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15 mm bore steel tube complete all as specified.

S&F Pillar tap, cast copper alloy, fancy type, with capstan head, chromium plated, screwed down high pressure, with or without lettered 'Hot or ‘Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed to 15 mm bore steel tube complete all as specified.

S &F Brass CP mixer (wall mixer) for mixing of hot and cold water screwd down for iron pipe and fix in repairs complete all as specified.

S&F Stop valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, screwed both ends for iron pipe or for union and fixed for 15 mm bore steel tube complete all as specified.

Supply & Fix Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed to 20 mm bore GI Pipe complette all as specified and as directed by Esngr-in-Charge.

S&F Ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed to 20 mm bore steel tube complete all as specified.

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified.

S&F 110 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.

S&F 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.

S&F PVC(SWR) pipes 110 mm dia as weep holes in retaining wall, complete all as specified and directed.

S&F 110 mm bore, PVC (SWR) bends any radius complete all as specified.

S&F 75 mm bore, PVC (SWR) bends any radius complete all as specified.

S&F 110 mm bore, PVC (SWR) junction single, (single T) equal or unequal, provided with access door complete all as specified.

S&F 110 mm bore, PVC (SWR) vent cowl complete all as specified.

S&F 75 mm outer dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement to waste pipe & fixed in cement concrete (1:2:4) type B1complete all as specified.

Supply & Fix Vitreous squatting pan, `Orissa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) and making system fully functional and leak proof to the entire satisfaction of Engineer-in-Charge. Make Hindware/cera.

Supply & Fix vitreous china wash hand basin white flat back of size 550x400mm including brackets and CP waste coupling and making good to disturbed portion including PVC connection and PVC waste pipe etc complete all as specified and directed .Make:Parryware/Hindware/Cera

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified.

S&F Low density polyethylene (LDPE) pipes, 32 mm bore, of pressure rating 6 Kgf/ Sqcm as in waste pipe complete all as specified.

S&F 10 Ltrs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and connections to pipes and fixing of chain and pull, or lever, if any complete all as specified.

Supply & Fix Soap dish of size 160 x 90 mm any type fixed to plugs with chromium plated brass screw complete all as specified and as directed by Engr-in-Charge.

M&L for PCC (1:3:6) type C-1 using 20 mm graded agg for bond stone of size 15cmx15cm in section in length as per section of wall, including weathering, slightly rounded for chamfered angles and throating, complete all as specified and directed.

M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified.

M&L stainless steel railing height 1.10 m to staircase / platform comprising of newel post of 75mm dia stainless steel pipe with nevwel cap, ballusters of 50mm dia stainless steel pipe & bottom hand rail 16 mm dia (03 nos.) stainless steel pipe including polishing, reveting, bolting and necessary ftting with wall and floor surface complete all as specified and directed. Note: (i) stainless steel work shall be of grade SS-304) (ii) The thickness of SS railing pipe shall be 1.65 mm.

M&L for point wiring with 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated, FRLS and unsheathed type alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continous earthing in & including PVC casing & caping with accessories having ISI mark fixed on wall surfaces / ceiling including provision of PVC box of appropriate size for fixing switches sockets etc. all as specified Make- Polycab/Finolex/Anchor

One light /fan point point controlled by one switch

One socket 3 Pin 5A pin socket oulet 5Amps on indepndent board with cables 1.5 Sqmm size

All as per item No 89 hereinbefore but for socket outlet 3 pin 15 Amps on independent board with cable size of 4 sqmm and earth continuity conductor cable of size 2.5 sqmm. Make- Polycab/Finolex/Anchor

S&F switch piano flush type single pole one way 5/6 Amps. Make : Anchor /Havells/ Kinjal.

S&F socket outlet 5 pin 5/6 Amps flush type multipurpose suitable for 3 pin/2 pin plug complete . Make : Anchor /Havells/ Kinjal.

S&F of switch piano15 Amp 230 Volt, flush button single pole one way complete all as specified and directed by Engr-in-Charge . Make : Anchor /Havells/ Kinjal.

S&F socket outlet 2 in 1, 3 pin 5/6 Amps and 3 pin 15/16 Amps flush type Make : Anchor /Havells/ Kinjal.

S&F ceiling rose surface type 3 terminals to be fixed on PVC block Make : Anchor /Havells/ Kinjal.

M&L for lamp holder PVC/Polycarbonate typr with back plate suitable for batten fittings/angle fittings. Make : Anchor /Havells/ Kinjal.

Supply and fixing LED Lamp 12 W system lumen (NOM) 600 with all accessories all as specified and directed by Engg-in-Charge. Make:CG cat part No-LSW-12W-CDL-BC or equivalent.

Supply & fixing LED Bulk Head light 6 Watt complete accociries Make Philiphs, Cat Pt No -WT202WLED6SNWPSUS2PC or equivalent

Supply and fixing surface & wall mounted LED batten 2feet with extruded aluminium housing and robust construction 10 W system lumen (NOM) 2000 with all accessories all as specified and directed by Engg-in-Charge. Make: Philips catalogue no. BN021 LED10S-6500 PSU GRS1 or equivalant of Wipro and CG

Supply and fixing surface & wall mounted LED batten 4feet with extruded aluminium housing and robust construction 20 W system lumen (NOM) 2000 with all accessories all as specified and directed by Engg-in-Charge. Make: Polycab catalogue no. LDO0103031 or equivalant of Wipro and CG

Supply and Fixing PVC Body sound proof Exhuast fan 150 mm size with single phase 230 Volt 900 RPM with louvers complete.making a hole in wall and after finishing work distrubed surface of wall complete all as specified and directed by Engr-in - Charge Make- Usha /Baja/CG

S&F sheet metal enclosure for DB, 240 Volt 4 way double door . Make- Havells/Standard/ Legrand

S&F sheet metal enclosure for DB, 240 Volt 8 way double door . Make- Havells/Standard/ Legrand

Supply and fixing MCB SPN 40 Amps 10 KA single phase 240 volts including making connection complete all as specified Make- Havells/Standard/ Legrand

Supply and fixing MCB SP 6-32 Amps 10 KA single phase 240 volts including making connection complete all as specified Make- Havells/Standard/ Legrand

S&F 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart incl 4 mm suspension wire, one twin core cable flat of size 10 Sqmm. (Make - Havells/Plaza/Fenolex)

S&F House service bracket hook type complete with 40mm GI Pipe 3.0 m long 90 degree bends, M.S hook and stay or guy.

S&F water heater storage type with multifunctional safety valve, electric operated 230 V, Single Phase complete including one no of heating element, thermostat and indicator lamps and all safety advices as per E-in-C's Branch technical instructions and of capacity 25 liters including provn of hot and cold water pipe ,NRV ,grouting nut, bolts in walls and making good disturbed surfaces. Make : Indo/Bajaj/Havells with ISI Marked and 5 star rating. Make- Bajaj/Usha /Racold

Net Contract Sum will be after deducting Sch Of Credit of Rs. 16875.00

M/S H S ENTERPRISES