Upgradation of Dumping Site by Supplying, Installing & Testing following Machineries at Dhrangadhra Dump Site.

NAME OF WORK :-

Upgradation of Dumping Site by Supplying, Installing & Testing following Machineries at Dhrangadhra

No Item Qty Unit Rate Amount

Supply and install of Trommel machine with conveyor belts of capacity 50 TPD for processing of solid

Rotary Screen-50 TPD (75mm Hole)

For Segregation of Waste Material, Rotary Screen size-L-3400mmX Dia-1600mm Rotary Screen- Inclined

at 5 degrees Mash Size 75mm, MOC of Drum Mild Sheet of 10mm , Both Side Guards of Screening

Machine -MS, Motor Gearbox -5HP, Output Rpm- 32-40, Make- Siemens/ABB/CG/Artiligence. Electric

Control Panel. Cable makes- Havells/KEI.

(A) Shorting & Feeding Conveyor-1no.- Conveyor Size -L-5500mmXW-750mm, Idler Roller Pully -

250mm, Bearing Make -SKF/NBC, Belt Size- 650mmX6mm ThickX3Pty, Make-

Continental/JK/Artiligence, Motor+ Gear, Gear Output RPM-32-40, 5 HP Motor+ Gear Make-

Artiligence/Siemens/ABB/CG Supporting Structure -ISMC-15125X65/100X50

(B) Main & Accept Conveyor-1no.- Conveyor Size -L-7500mmXW-750mm, Idler Roller Pully -250mm,

Bearing Make -SKF/NBC, Belt Size-650mmX6mm Thick X3Ply, Make- Continental/JK/Artiligence, Motor+

Gear, Gear Output RPM-32-40, 3 HP Motor+ Gear Make-Artiligence/Siemens/ABB/CG. Supporting

Structure -ISMC-15125×65/100X50

(C) Reject Conveyor-1no.- Conveyor Size -L- 7500mm X W-750mm, Idler Roller Pully -250mm, Bearing

Make -SKF/NBC, Belt Size-650mmX6mm ThickX3Ply, Make- Continental/JK/ Artiligence, Motor+ Gear,

Gear Output RPM-32-40, 3 HP Motor+ Gear Make-Artiligence/Siemens/ABB/CG. Supporting Structure -

2 Supply and install of Bag Opener of capacity 50 TPD for processing of solid waste

1. Bag Opener of Rotary Motion type Screen with MSW Material having capacity of Bulk density

material of 240 Kg/m3, Screen RPM 22 to 25mm, 1 feed Points, 12 No. Bag Opening Edges. 2. Screen

size Dia. 1000x4250 mm single deck with Screen Material of MS Perforated sheet with 5mm thick Ø200

/ Ø100 mm hole with adjustable inclination. 3. Self alligned type Roller (IS 2069 Grade-A) having size

Ø250x100 mm width (IS2060 Grade-A), Outer Ring as per IS 2069 Flat 100x30 mm thick, Sp. Roller

Bearing of Make - SKF/NTN 4. Motor of 12 HP 3 Phase 415V 50Hz 1440 Rpm with IP55 Protection and

Make - Crompton/ABB/Bharat Bijlee/Equivalent.5. Gear Box of Ratio 30:1, Helical Type, Spare Gear

drive, Make - PBL/Elecon/Primium/Local. 6. Fabricated structure from ISMC (100x50x5 thick) ISA

(50x50x6 mm thick) wheel, Vibration isolation pads on support structure, Gasket at mating bolting faces

to eliminate noise and vibration. Fabricated Chute from MS Sheet with 3mm thick inlet & outlet chute

3 Supply and install of Conveyor Belt for processing of solid waste

Screening machine for screening of compost converted from garbage As per Specifications of DPR

attached with Tender Documents.

Net Total Rs. :-

NOTE :-The rates quoted shall be exclusive of GST but Inclusive of all other taxes, duties which shall not be

paid extra. While GST will be paid for admissible part of actual work done at the approved tender rates. GST

Shall be paid as per prevailing rates at the time of payment.