Loading…
Loading…
Tender Value
₹49.9 L
EMD Value
₹50,000
Closing Date
31 Jan 2026, 6:00 pmClosed
Similar tender results from the same govt authority in the past 3 years.
Add. City Engineer
SETC of wiring works at various municipal properties under jurisdiction of West (Rander) Zone of SMC (Attempt-III)
262760
ACE /WZ / 14 /2025-26, W.NO.09
Open
Supply,erection and Commissioning
Surat
3 documents required · 3 mandatory
₹1,770
Commissioner, Surat Municipal Corporation
₹50,000
15 Jan 2026
15 Jan 2026
15 Jan 2026
31 Jan 2026
15 Jan 2026
R&B SOR Unit rate of
Sr. Total Amt. including
2023-24 Description Qty. SETC including Unit
ITEM NO. GST in Rs.
Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green)
both are of ISI marked 1.1 KV grade ZHFR/HRFR PVC insulated multistrand copper
wires, in below type of pipe erected with 6A Modular type switch / bell push &
accessories and earth continuity of following type, erected on PVC /
1 1-2-1. Metallic/Wooden box, single mounting base frame covered with textured/ 800 435.13 Point
metallic front plate modules erected on/in wall / ceiling as per pipe erected, with
necessary Lamp holder/ceiling rose / H.D.Connector as directed.
(a) with medium class Rigid PVC pipe and accessories erected flushed on
wall/ceiling complete - Cat III
Point wiring for secondary light point with 2-1.5 sq.mm & earthwire of 1.5 sq.mm
(green) both are of ISI marked 1.1 KV grade ZHFR/HRFR PVC insulated multistrand
copper wires, in following type of pipe to be erected concealed in / flushed on
wall/ceiling, complete with earth continuity and necessary connection with
primary light with accessories erected on Metal / PVC box covered with 3 mm
thick PC(Polycarbonet) / Acrylic sheet for open / concealed wiring. with necessary
2 1-1-4. Lamp holder / ceiling rose / H.D.Connector as directed. 100 155.72 Point
Note:- Maximum up to 6 mtrs length, excess will be considered as Mains for
Secondary Point.
(f) with medium class Rigid PVC pipe and accessories erected flushed on
wall/ceiling complete
Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both
are of .ISI marked 1.1 KV Grade ZHFR/HRFR PVC insulated multistrand copper
wires, in following type of pipe to be erected Open/ concealed in / flushed on
wall/ceiling complete with 6A Modular type switch and hum free EME four or
more step type electronic fan regulator with separately mounted and accessories
3 1-2-2. with earth continuity of following type erected on PVC / Metallic box, single 550 621.99 Point
mounting base frame covered with textured/metallic front plate modules erected
on / in wall / ceiling as per pipe erected. with necessary ceiling rose /
H.D.Connector as directed.
(a) with medium class Rigid PVC pipe and accessories Cat.III
Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are
of ISI marked 1.1 KV grade ZHFR/HRFR PVC insulated multistrand copper wires, in
below type of pipe erected complete with Modular type switch & 5 pin Plug
erected on PVC / Metallic/Wooden box covered with appropriate front plate
1-2-3(i) modules erected on /in wall /ceiling as per pipe erected with following type of 500 461.82 Point
[I] For 6A Plug with 2-1.5 sq.mm Cu. Wire
(a) with medium class Rigid PVC pipe and accessories flushed on wall/ceiling
[II] For 16A Plug with 2-2.5 sq.mm Cu. ZHFR/HRFR Wire
(a) with medium class Rigid PVC pipe and accessories flushed on wall/ceiling
200 694.96 Point
[III] For 16A Plug with 2-4 sq.mm Cu. Wire with 2.5 sq.mm ( green) ZHFR/HRFR
(a) with medium class Rigid PVC pipe and accessories flushed on wall/ceiling 100 819.53 Point
Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket erected
on PVC / Metallic box, single mounting base frame covered with textured /
metallic front plate modules erected on / in wall / ceiling with following type
accessories Cat. III
Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of
1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade ZHFR/HRFR PVC insulated
multistrand copper wires, in following type of pipe to be erected Open/ concealed
in/ flushed on wall/ ceiling, complete with 6A Modular type switches and
following type of accessories erected on PVC/ Metallic box, single mounting base
6 1-2-5. frame covered with textured/ metallic front plate modules erected on/ in wall/ 50 549.92 Point
ceiling as per pipe erected. With necessary batten/angle holder or ceiling rose or
H.D.Connector as directed.
(a) with medium class Rigid PVC pipe and accessories flushed on wall/ceiling
Providing following type of Modular Type Accessories mounted with pvc / metallic
box, single mounting base frame covered with textured / metallic front plate
modules erected with necessary connection. As desired by Engineer In charge
(1)One No. SP 6 Amp. 100 141.53 Each
7 1-2-6. (2) One No 5 pin plug 200 141.53 Each
(4) TV Co-axial Socket outlet - Cat III 25 150.85 Each
(7) Blank Plate Single Cat. III 25 23.73 Each
(8) Modem Jack for Computer Open RJ-45 - Cat III 25 150.85 Each
(22) 16/20/25 Amp. Modular Starter for Motor / A.C. Unit Complete. CAT-III.
1-2-7. Providing & erecting following type of Modular Type Accessories with
necessary connection. As desired by Engineer In charge
(1) 6 Amp. SP one way switch 250 24.58 Each
(2) 16 Amp. SP one way switch 15 47.46 Each
(3) 6/16Amp. Universal socket 150 76.27 Each
(4) 6 A socket 250 38.14 Each
Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size
complete to be erected on/in wall or ceiling erected with necessary PVC fittings &
Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, 500 22.03 Mtr.
in approved manner as directed (a) 20 mm
Providing & erecting PVC Corrugated Flexible Conduit with required nos. of
coupling, PVC bushes, Check-nuts etc. complete of following sizes.
Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping) having double-
locking arrangement with grooves, trunking of size not below 12.5 mm in height
as per IS with accessories of PVC/Resin polypropylene not below 1.8 mm thick
11 1-3-5. duly sealed in joint & erected on wall / ceiling of following size .
(A) Supplying and laying UPVC cable trucking system comprising unplasticised
polyvinyl, chloride rigid material with ignition free & flame proof confirming BS.
With All necessary accessories (Like elbow, tee, bank etc..) and measuring of 250 262.71 Mtr.
following sizes.
(1) 75 mm x 50 mm trucking
(2) 100 mm x 50 mm trunking 250 403.39 Mtr.
Supplying under floor pregalvanised corrosion proof rectangular sheet steel cable
trunking of 1.6 mm thick having with stand point load up to 1.33 Ton & free from
seepage of concrete of screed water with all accessories,Junction Box,Joints as
required and demanded by engineer-incharge and laying/erecting as per OEM
13 1-3-10. guidelines and as per instruction of engineer incharge having following size of
dimensions and No of compartments (W x D x T) Cat-III
[1] 50mm x 25mm x 1.6 mm with One Compartment 100 281.36 Mtr.
[2] 75mm x 25mm x 1.6 mm with One Compartment 100 356.78 Mtr.
[3] 100mm x 25mm x 1.6 mm with one compartment 100 432.20 Mtr.
Mains with 1.1 KV grade ZHFR/HRFR PVC insulated ISI marked stranded Copper
conductor wire in following type of pipe to be erected in / on wall / ceiling with
1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green color for
earth continuity of following size
(a) with medium class Rigid PVC pipe and accessories
(a) 2 wire 4 sq. mm
(b) 2 wire 2.5 sq. mm 2500 76.27 Mtr.
(c) 3 wire 1.5 sq. mm 1 76.27 Mtr.
(d) 3 wire 2.5 sq. mm 2500 94.92 Mtr.
(e) 4 wire 1.5 sq. mm 1 85.59 Mtr.
(f) 4 wire 2.5 sq. mm 100 118.64 Mtr.
(g) 6 wire 2.5 sq. mm 100 161.02 Mtr.
Mains with ISI marked electrolyte stranded copper conductor, Non PVC Zero
Halogen free fire retardant insulated copper conductor, insulated wire
(ZHFR/HRFR) conforms to IS-694, erected in existing pipe with 2.5sq. mm copper
conductor of same specifications for earth continuity of following size.
(a) with medium class Rigid PVC pipe and accessories
[c] 2 wire 1.5 sq.mm
(a) 2 wire 4 sq. mm 1 104.24 Mtr.
(b) 2 wire 6 sq. mm 1 137.29 Mtr.
15 1-4-2. (c) 2 wire 10 sq. mm
(use earth wire of 4 sq.mm )
(d) 3 wire 4 sq. mm 1 133.90 Mtr.
(e) 3 wire 6 sq. mm 1 188.98 Mtr.
(f) 3 wire 10 sq. mm
(use earth wire of 4 sq.mm )
(g) 4 wire 4 sq. mm 1 169.49 Mtr.
(h) 4 wire 6 sq. mm 1 244.92 Mtr.
(i) 4 wire 10 sq. mm
(use earth wire of 4 sq.mm )
Supplying & erecting approved make LAN cable of following size in existing pipe as
16 1-4-8. per direction 1500 43.22 Mtr.
Providing & erecting Switch board for Computer or electric apparatus consisting of
following items in single board erected on PVC / Metal/Wooden board with
mm thick PC (Polycarbonate) / Acrylic sheet erected as directed
1 no. 6A/16A universal plug-switch combined.
4 nos. 6A 5 pin Plug...
[B] For Modular Type Accessories...
18 1-6-12. Decorative call bell Ting-tong box type 250 volts complete erected 10 66.95 Ea.
Providing and fixing approved make Perforated C type cable tray. Made from
sheet steel. The cable tray should be single or double bended as per required and
as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS
4.11.1 2629/4759. with max 17.5% perforation with coupler plate / Fish plate and GI
19 hardware like nut - bolt and washers etc. erection with necessary support(
included) as per Specification and as per instruction of engineer in charge..
Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to
Watt assembled on single MCPCB, with housing used as a heat sink shall be made
of co-extruded polycarbonate channel with diffuser part in needed opal finish
with company mark/name 160V to 270V, Power Factor more than 0.9, THD < 15%,
SOR-22-23 CCT 3000 K to 6500K,
2.16.1 (A)-2 Luminaire efficacy> 85 lumens/watt ,LED
LED driver efficiency > 85 %
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have
shown ranges of Wattage capacity of LED fittings.The Engineer incharge may
select any wattage capacity between the ranges shown.)
(ii) 18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet 500 402.54 Ea.
Supply, Installation, Testing and Commissioning of suitable sweep, BEE 5 Star
rated, Ceiling fan with Brush Less Direct Current (BLDC) permanent ferrite magnet
Motor, class of insulation: B, Rust free 3 nos.Aluminium blades, 2 nos. canopies,
shackle kit with earthing provision, copper winding, Power factor not < 0.9,
Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM,
RPM,230v (tolerance as per IS : 374-2019), THD < 10%, with remote unit for Speed
Control and all remaining accessories including safety pin, nut bolts, washers,
temperature rise = 75 degree C (Max.), suitable for 140 to 285 Voltage and
rectifier circuit with surge, over current and overload protection , 50 Hz, Single
phase AC Supply, earthing etc. Complete as required.[ Make shall be approved by
Engineer in Charge]
Supplying & erecting single phase approved make industrial exhaust fan suitable
for medium duty ring mounted low noise operation suitable for medium duty
having following dia size and maximum speed in RPM [A] 305 mm dia 900 RPM
Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down
23 5-2-1. rod erected duly painted for fan complete with proper insulation without leakage 1 105.93 Mtr.
Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC
bars up to 50mm length each side and pierced through a 16 Gauge M.S. box /
Heavy Duty PVC box complete erected concealed in Ceiling with necessary
Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box.
Providing and erecting Sheet Steel powder coated MCB distribution board - flush /
surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms
to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of
MCBs.(The DBs should be used of same company of MCB to be used) suitable for
(A) single phase incoming and horizontal single phase outgoing
(iii)8 way 25 695.76 Ea.
(b) sheet steel double door (IP-43)
(iii)8 way 25 1,140.68 Ea.
Supplying & erecting Sheet Steel powder coated Cable end termination Box to be
mounted on Top or Bottom of the MCB Distribution Box for housing/covering
Extra wires & Cables, suitable for following size of MCB DB Box.
27 3-11-6. (C) Single Phase 8 Way 10 322.03 Ea.
(d) Single Phase 12 Way 10 385.59 Ea.
(G) Three Phase 8 Way 10 682.20 Ea.
(H) Three Phase 12 Way 10 788.14 Ea.
providing and erecting Approved make RCCBs conforming to IS: 12640 and having
sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for
operation on single phase 240 V,50Hz. having characteristic of quick action &
28 3-12-1. tripping with all advance feature & do not incorporate any electronic component.
for following Max. rating erected as directed
(i) 25 Amps.DP Cat. III 10 1,949.15 Ea.
(ii) 40Amps. DP Cat. III 10 2,211.86 Ea.
(iii) 63 Amps. DP Cat. III 10 2,627.12 Ea.
Providing and erecting Approved make RCCBs conforming to IS: 12640 and having
sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for
operation on 3 phase and neutral 415V,50Hz. having characteristic of quick action
29 3-12-2. & tripping with all advance feature & do not incorporate any electronic
component for following Max. rating erected as directed.
(i) 25 Amps.FP Cat. III 10 2,542.37 Ea.
(ii) 40Amps. FP Cat. III 10 2,610.17 Ea.
(iii) 63 Amps. FP Cat. III 10 3,008.47 Ea.
Providing & erecting 240 V MCB double pole switch for motor & inductive load
(C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box
30 3-10-2. having following capacity
Supplying & erecting approved make RCCB + MCB (Electro magnetic type only)
working on residual current device having 10 KA short circuit breaking capacity
and 30 mAmp. Sensitivity & 30 mili sec. tripping time conforming to IS 12640 test
knob facility trip free mechanism operating for rated leakage at nominal ten volt,
complete erected including all materials lugs screws etc. completed.
[a] 6A / 10A / 16A / 20A / 25A 2 pole single phase
[b] 32A / 40A, 2 pole Single Phase
[c] 63 A, 2 pole Single Phase
[d] 6A to 25 A, 4 Pole Three Phase
[e] 32A to 40 A, 4 Pole Three Phase
[f] 63A, 4 pole Three Phase
Providing and erecting Pipe type earthing with 40 mm dia 2.5 mtr long 'B' grade
G.I. pipe with necessary coupling buch buried in specially prepared earth pit & G.I.
earth wire of 8 SWG erected & connected as directed (For panel)
33 3-14-6-c For using salt and charcoal / coke as required for pipe type earthing. 25 169.49 Ea.
Supplying & erecting earth pit of minimum bore dia.150mm size approved make
Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of
corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200
Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising,
connection terminal dia of 12mm with constant ohmic value surrounded by highly
conductive compound with high charge dissipation suitable for following type of
applications with chamber and heavy duty cover. (A)(approved make OEM has to
submit test certificate including value of earth resistance of installation duly
stamped and signed by agency and officer Incharge has to ensure the value of
earthing resistane mentioned in test Certificate) & having back filling compound
of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as
per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar
content:- <2%(C) Back fill Compound :- Earthing compound should be capable to
retain moisture for long time Necessary test report must be submitted by Agency.
(a) For Electrical Installation up to 440V in normal soil
Length of pipe - 1 Mtr 25 4,544.92 Ea.
Back filling compound - 1 Nos Bag of 15 Kg.
(b)For Electrical installation up to 11 KV in normal soil.
Length of Pipe : 2.00 mtrs 28 5,701.69 Ea.
Back filling Compound :1 no. Bag of 25 Kg.
35 3-14-2 Providing and erecting required size HOT deep Galvanised iron strip for earthing 100 90.00 kg
of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. using proper clamp.
36 3-14-5 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. 20 90.00 kg
(C) 1 H.P. single phase open well motor pump set suitable for 185 LPM discharge
@ 25 mtr. head, suitable for 32 mm dia. Delivery pipe with control panel.Cat. II
Sub Total of the items
18% GST on sub total
1% Labour Cess on sub total
Total estimated amount of the work including GST & Labour Cess
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
wiring 8-1-26.pdf
price bid.pdf
Download all tender documents and submit your bid