REPAIRS TO STEEL FURNITURE, OFFRS AND MAP FURNITURE ETC AT BANAR IN ARMY AREA JODHPUR

Amount

Almirah steel Med and Small (FD-243, 110 & 1032)

Material and labour for SHELF made out of 1.0mm thick Mild Steel Sheet of ALMIRAH STEEL MED and made to shape and size as shown on Drawing No. FD-243 & FD-1032, necessary preperation of surfaces, applying two coats of Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Shelf, complete all as specified and as directed.

Material and labour for DOOR made out of 1.0mm thick Mild Steel Sheet of ALMIRAH STEEL MED and made to shape and size as shown on Drawing No. FD-243 & FD-1032, necessary preperation of surfaces, applying two coats of Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Door, complete all as specified and as directed.

Material and labour for LEG made out of 1.0mm thick Mild Steel Sheet of ALMIRAH STEEL MED and made to shape and size as shown on Drawing No. FD-243 & FD-1032, necessary preperation of surfaces, applying two coats of Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Leg, complete all as specified and as directed.

Material and labour forLOCKING DEVICE complete with MS rod and cover of ALMIRAH STEEL MED and made to shape and size as shown on Drawing No. FD-243 & FD-1032 including taking out unserviceable Locking Device, complete all as specified and as directed.

Material and labour for Brass LOCK (MAKE : GODREJ) of ALMIRAH STEEL MED and fixing to Almirah as shown on Drawing No. FD-243 & FD-1032 including taking out unserviceable Lock, complete all as specified and as directed.

Material and labour for chromium plated Mild Steel HANDLE (as approved) of ALMIRAH STEEL MED and fixing to Almirah as shown on Drawing No. FD-243 & FD-1032 including taking out unserviceable Handle, complete all as specified and as directed.

Material and labour for Mild Steel HINGE (as approved) 75mm in size suitable for ALMIRAH STEEL MED and fixing to Almirah as shown on Drawing No. FD-243 & FD-1032 including taking out unserviceable Hinge, complete all as specified and as directed.

Material and labour for preperation of old surfaces of ALMIRAH MED STEEL (Drawing No. FD-243 & FD-1032) by Sand Paper/Scrapper and applying two Coat of , Synthetic Enamell Paint (as approved) by Spray Painting Machine, complete all as specified and as directed. Outer side of front doors of Almirah Shall be painted in blue/brown colour and remaining portion shall be painted in Light Grey/Off White colour.

Almirah Large steel, 1/2H 1/2S (FD-351,1031 & 1033)

Material and labour for SHELF made out of 1.0mm thick Mild Steel Sheet of ALMIRAH LARGE STEEL and made to shape and size as shown on Drawing No. FD-1031, necessary preperation of surfaces, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Shelf, complete all as specified and as directed.

Material and labour for DOOR made out of 1.0mm thick Mild Steel Sheet of ALMIRAH LARGE STEEL and made to shape and size as shown on Drawing No. FD-1031, necessary preperation of surfaces, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Door, complete all as specified and as directed.

Material and labour for LEG made out of 1.0mm thick Mild Steel Sheet of ALMIRAH LARGE STEEL and made to shape and size as shown on Drawing No. FD-1031, necessary preperation of surfaces, applying two coats of Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Leg, complete all as specified and as directed.

Material and labour for LOCKING DEVICE complete with MS rod and cover of ALMIRAH LARGE STEEL and made to shape and size as shown on Drawing No. FD-1031 including taking out unserviceable Locking Device, complete all as specified and as directed.

Material and labour for Brass LOCK (MAKE : GODREJ) of ALMIRAH LARGE STEEL and fixing to Almirah as shown on Drawing No. FD-1031 & FD-1033 including taking out unserviceable Lock, complete all as specified and as directed.

Material and labour for Chromium plated Mild Steel HANDLE (as approved) of ALMIRAH LARGE STEEL and fixing to Almirah as shown on Drawing No. FD-1031 including taking out unserviceable Handle, complete all as specified and as directed.

Material and labour for Mild Steel HINGE (as approved) 75mm in size suitable for ALMIRAH LARGE STEEL and fixing to Almirah as shown on Drawing No. FD-1031 including taking out unserviceable Hinge, complete all as specified and as directed.

Material and labour for preperation of old surfaces of ALMIRAH LARGE STEEL (Drawing No. FD-1031 &1033) by Sand Paper/Scrapper and applying two Coat of Synthetic Enamell Paint (as approved) by Spray Painting Machine, complete all as specified and as directed. Outer side of front doors of Almirah Shall be painted in blue/brown colour and remaining portion shall be painted in Light Grey/Off White colour.

Chair Verandah FD/E6/MAP/11 (FD-256 & 359)

Material and labour for welding (full round of pipe as a one spot) of broken part of CHAIR VERANDAH as shown on Drawing No. FD-256 & FD-359, rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of (White Colour) Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable part, complete all as specified and as directed.

Material and labour for Mild Steel Round Bar 12mm dia to cover the distance between RT & LT Leg alongwith the Seat Front Side and Rear Side of CHAIR VERANDAH as shown on Drawing No. FD-256 & FD-359 and welded, necessary preperation of surfaces, applying two coats of (White Colour) Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Bar, complete all as specified and as directed.

S&F HARD RUBBER SHOE superior quality (as approved) fixing to Leg of CHAIR VERANDAH as shown on Drawing No. FD-259 & 356 including taking out unserviceable Shoe, complete all as specified and as directed.

Material and labour for Re-canning of CHAIR VERANDAH in mat pattern with 4.0mm wide Half Round Oval Shape Plastic Cane (as approved) to Frame as shown on Drawing No. D-256 & 359 including taking out old/worn out Canning, complete all as specified and as directed.

Material and labour for removing/scrapping old worn out Paint from Steel Frame of CHAIR VERANDAH (Drawing No. FD-256 & 359) by Sand Paper/Scrapper and applying One Coat of White Colour Synthetic Enamell Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Chair CB A Steel With Arms (FD-75(M))

Material and labour for SEAT FRAME made out of Second Class Hardwood of CHAIR CBA STEEL WITH ARMS, fixed with 4 No. of Machine Screw 75x3.0mm and Painting with Synthetic Enamell Paint (as approved) on Seat Frame, canning with superior quality of Plastic Cane 2.0mm Half Round Oval Shape for Seat and 3.0mm for Border as shown on Drawing No. FD-75(M) including taking out unserviceable Seat Frame, complete all as specified and as directed.

Material and labour for BACK FRAME made out of Second Class Hardwood of CHAIR CBA STEEL WITH ARMS, fixed with 4 No. of Machine Screw 75x3.0mm and Painting with Synthetic Enamell Paint (as approved) on Seat Frame, canning with superior quality of Plastic Cane 2.0mm Half Round Oval Shape for Seat and 3.0mm for Border as shown on Drawing No. FD-75(M) including taking out unserviceable Back Frame, complete all as specified and as directed.

Material and labour for ARMS REST made out of Second Class Hardwood of CHAIR CBA STEEL WITH ARMS, fixed with suitable size Screws and Painting with Synthetic Enamell Paint (as approved) on Back Frame as shown on Drawing No. FD-75(M) including taking out unserviceable Arms Rest, complete all as specified and as directed.

Material and labour for Mild Steel Flat Iron 25x3.0mm as RUNNER of length 350mm (approx), making hole for fixing End and Other End welded to CHAIR CBA STEEL WITH ARMS size 35x25x3 mm, applying two coat of Synthetic Enamel Paint over a coat of Red Oxide Zinc Chrome Primer on Steel Surfaces as shown on Drawing No. FD-75(M) including taking out unserviceable Runner, complete all as specified and as directed.

S&F PVC CAP at the top of Back Steel Pipe of CHAIR CBA STEEL WITH ARMS as shown on Drawing No. FD-75(M) including taking out unserviceable Cap, complete all as specified and as directed.

S&F HARD RUBBER SHOE superior quality (as approved) fixing to Leg of CHAIR CBA STEEL WITH ARMS as shown on Drawing No. FD-75(M) including taking out unserviceable Shoe, complete all as specified and as directed.

Material and labour for removing/scrapping old worn out Paint from exposed Steel Frame of CHAIR CBA STEEL WITH ARMS (Drawing No. FD-75(M)) by Sand Paper/ Scrapper and applying one coat of Synthetic Enamell Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Chair CB Steel without Arms (FD-75(M))

Material and labour for SEAT FRAME made out of Second Class Hardwood of CHAIR CB STEEL W/O ARMS, fixed with 4 No. of Machine Screw 75x3.0mm and Painting with Synthetic Enamell Paint (as approved) on Seat Frame, canning with superior quality of Plastic Cane 2.0mm Half Round Oval Shape for Seat and 3.0mm for Border as shown on Drawing No. FD-75(M) including taking out unserviceable Seat Frame, complete all as specified and as directed.

Material and labour for BACK FRAME made out of Second Class Hardwood of CHAIR CBA STEEL W/O ARMS, fixed with 4 No. of Machine Screw 75x3.0mm and Painting with Synthetic Enamell Paint (as approved) on Seat Frame, canning with superior quality of Plastic Cane 2.0mm Half Round Oval Shape for Seat and 3.0mm for Border as shown on Drawing No. FD-75(M) including taking out unserviceable Back Frame, complete all as specified and as directed.

Material and labour for Mild Steel Flat Iron 25x3.0mm as RUNNER of length 350mm (approx), making hole for fixing End and Other End welded to CHAIR CBA STEEL W/O ARMS size 35x25x3 mm, applying two coats of Synthetic Enamel Paint over a coat of Red Oxide Zinc Chrome Primer on Steel Surfaces as shown on Drawing No. FD-75(M) including taking out unserviceable Runner, complete all as specified and as directed.

S&F PVC CAP at the top of Back Steel Pipe of CHAIR CBA STEEL W/O ARMS as shown on Drawing No. FD-75(M) including taking out unserviceable Cap, complete all as specified and as directed.

S&F HARD RUBBER SHOE superior quality (as approved) fixing to Leg of CHAIR CBA STEEL W/O ARMS as shown on Drawing No. FD-75(M) including taking out unserviceable Shoe, complete all as specified and as directed.

Material and labour for removing/scrapping old worn out Paint from exposed Steel Frame of CHAIR CBA STEEL WITH ARMS (Drawing No. FD-75(M)) by Sand Paper/Scrapper and applying One Coat of Synthetic Enamell Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Chair Computer, Chair visitors and Chair Revolving Various types (TP)

Material and labour for TAPESTRY/FABRIC CLOTH over SYNTHETIC FOAM 25mm thick (as approved) for SEAT/BACK of CHAIR COMPUTER/ CHAIR VISITOR/ CHAIR REVOLVING including taking out old worn out Tapestry/ Fabric Cloth and Foam from Chairs, complete all as specified and as directed.

Material and labour for CASTOR WHEEL (as approved) suitable and match with existing castor wheels of CHAIR COMPUTER/ CHAIR VISITOR/ CHAIR REVOLVING including taking out unserviceable or broken Castor Wheel from Chairs, complete all as specified and as directed.

Material and labour for BOTTOM BASE (as approved) of CHAIR COMPUTER/ CHAIR VISITOR/ CHAIR REVOLVING including taking out unserviceable Bottom Base from Chairs, complete all as specified and as directed.

Material and labour for GAS LIFTING HYDROULIC SYSTEM of CHAIR COMPUTER/ CHAIR VISITOR/ CHAIR REVOLVING including taking out unserviceable Gas Lifting Hydroulic System from Chairs, complete all as specified and as directed.

Material and labour for HANDLE of CHAIR COMPUTER/ CHAIR VISITOR/ CHAIR REVOLVING including taking out unserviceable Handle from Chairs, complete all as specified and as directed.

Table Office Officer steel (FD-1003)

Material and labour for TOP of TABLE OFFICE OFFICER STEEL of Prelaminated post forming MDF Board 18/19 mm thick duly round edges, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ ARCHID), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing No. FD-1003 including taking out unserviceable Top, complete all as specified and as directed.

Material and labour for DRAWER made out of 1.6mm thick Mild Steel Sheet and fixing to TABLE OFFICE OFFICER STEEL as shown on Drawing No. FD-1003, necessary preperation of surfaces, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Drawer, complete all as specified and as directed.

Material and labour for CENTRAL STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE OFFICE OFFICER STEEL as shown on Drawing No. FD-1003, necessary preperation of surfaces, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Central Stiffener, complete all as specified and as directed.

Material and labour for SIDE STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE OFFICE OFFICER STEEL as shown on Drawing No. FD-1003, necessary preperation of surfaces, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Side Stiffener, complete all as specified and as directed.

Material and labour for Brass LOCK (MAKE : GODREJ) of TABLE OFFICE OFFICER STEEL and fixing as shown on Drawing No. FD-1003 including taking out unserviceable Lock, complete all as specified and as directed.

Material and labour for Mild Steel HANDLE of TABLE OFFICE OFFICER STEEL and fixing as shown on Drawing No. FD-1003 including taking out unserviceable Handle, complete all as specified and as directed.

Material and labour for for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm (as required) for TABLE OFFICE OFFICER STEEL as shown on Drawing No. FD-84 & FD-1003, necessary preperation of surfaces, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer complete all as specified and as directed.

Material and labour for removing/scrapping old worn out Paint from TABLE OFFICE OFFICER STEEL (Drawing No. FD-1003) by Sand Paper/Scrapper and applying Two Coats of , Synthetic Enamell Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Table office clk steel (FD-1004)

Material and labour for TOP of TABLE OFFICE CLERK STEEL of Prelaminated post forming MDF Board 18/19 mm thick duly rounded edges,exterior grade ISI marked (MAKE : GREEN PLY/CENTURY), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading as shown on Drawing No. FD-1004 including taking out unserviceable Top, complete all as specified and as directed.

Material and labour for DRAWER made out of 1.6mm thick Mild Steel Sheet and fixing to TABLE OFFICE CLERK STEEL as shown on Drawing No. FD-1004, necessary preperation of surfaces, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Drawer, complete all as specified and as directed.

Material and labour for CENTRAL STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE OFFICE CLERK STEEL as shown on Drawing No. FD-1004, necessary preperation of surfaces, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Central Stiffener, complete all as specified and as directed.

Material and labour for SIDE STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE OFFICE CLERK STEEL as shown on Drawing No. FD-1004, necessary preperation of surfaces, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Side Stiffener, complete all as specified and as directed.

Material and labour for Brass LOCK (MAKE : GODREJ) of TABLE OFFICE CLERK STEEL and fixing as shown on Drawing No. FD-1004 including taking out unserviceable Lock, complete all as specified and as directed.

Material and labour for Mild Steel HANDLE of TABLE OFFICE CLERK STEEL and fixing as shown on Drawing No. FD-1004 including taking out unserviceable Handle, complete all as specified and as directed.

Material and labour for for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm (as required) for TABLE OFFICE CLERK STEEL as shown on Drawing No. FD-1004, necessary preperation of surfaces, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer complete all as specified and as directed.

Material and labour for removing/scrapping old worn out Paint from TABLE OFFICE CLERK STEEL (Drawing No. FD-1004) by Sand Paper/ Scrapper and applying Two Coats of , Synthetic Enamell Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Table 3'x2' with out Drawer (FD-1007)

Material and labour for TOP of TABLE 3'X2' WITH OUT DRAWER of Prelaminated post forming MDF Board 18/19 mm thick duly rounded edges,, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing No. FD-1007 including taking out unserviceable Top, complete all as specified and as directed.

Material and labour for CENTRAL STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE 3'X2' WITH OUT DRAWER as shown on Drawing No. FD-1007, necessary preperation of surfaces, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unservice-able Central Stiffener, complete all as specified and as directed.

Material and labour for SIDE STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE 3'X2' WITH OUT DRAWER as shown on Drawing No. FD-1007, necessary preperation of surfaces, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Side Stiffener, complete all as specified and as directed.

Material and labour for for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm (as required) for TABLE 3'X2' WITH OUT DRAWER as shown on Drawing No. FD-1007, necessary preperation of surfaces, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer complete all as specified and as directed.

Material and labour for removing/scrapping old worn out Paint from TABLE 3'X2' WITH OUT DRAWER (Drawing No. FD-1007) by Sand Paper/ Scrapper and applying Two Coats of , Synthetic Enamell Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Table 3'x2' with Drawer (FD-1008)

Material and labour for TOP of TABLE 3'X2' WITH DRAWER of Prelaminated post forming MDF Board 18/19 mm thick duly rounded edges, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHID), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading as shown on Drawing No. FD-1008 including taking out unserviceable Top, complete all as specified and as directed.

Material and labour for DRAWER made out of 1.6mm thick Mild Steel Sheet and fixing to TABLE 3'X2' WITH DRAWER as shown on Drawing No. FD-1008, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Drawer, complete all as specified and as directed.

Material and labour for CENTRAL STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE 3'X2' WITH DRAWER as shown on Drawing No. FD-1008, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unservice-able Central Stiffener, complete all as specified and as directed.

Material and labour for SIDE STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE 3'X2' WITH DRAWER as shown on Drawing No. FD-1008, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Side Stiffener, complete all as specified and as directed.

Material and labour for Brass LOCK (MAKE : GODREJ) of TABLE 3'X2' WITH DRAWER and fixing as shown on Drawing No. FD-1008 including taking out unserviceable Lock, complete all as specified and as directed.

Material and labour for Mild Steel HANDLE of TABLE 3'X2' WITH DRAWER and fixing as shown on Drawing No. FD-1008 including taking out unserviceable Handle, complete all as specified and as directed.

Material and labour for for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm (as required) for TABLE 3'X2' WITH DRAWER as shown on Drawing No. FD-1008, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer complete all as specified and as directed.

Material and labour for removing/scrapping old worn out Paint from TABLE 3'X2' WITH DRAWER (Drawing No. FD-1008) by Sand Paper/ Scrapper and applying Two Coats of , Synthetic Enamell Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Table Dining Ors (Drawing No. FD-165(M))

Material and labour for TOP of TABLE DINING ORS of Block Board 18/19 mm thick with 22 guage aluminium sheet (MAKE : GREEN PLY/CENTURY), shown on Drawing No. FD-165(M) including taking out unserviceable Top, complete all as specified and as directed.

Material and labour for Mild Steel Square Pipe of size 20mm, 1.6mm thick as LEG having length from 300mm to 500mm and fixing/ welded to TABLE DINING ORS as shown on Drawing No. FD-165(M), applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Leg, complete all as specified and as directed.

Material and labour for Mild Steel Square/Round Pipe of size 25mm, 1.6mm thick as LONG RAIL and fixing/welded to TABLE DINING ORS as shown on Drawing No. FD-165(M), applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Long Rail, complete all as specified and as directed.

Material and labour for Mild Steel Square/Round Pipe of size 25mm, 1.6mm thick as SHORT RAIL and fixing/welded to TABLE DINING ORS as shown on Drawing No. FD-165(M), applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Short Rail, complete all as specified and as directed.

Material and labour for Mild Steel Square/Round Pipe of size 25mm, 1.6mm thick as SIDE STIFFNER and fixing/welded to TABLE DINING ORS as shown on Drawing No. FD-165(M), applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Side Stiffner, complete all as specified and as directed.

Material and labour for Mild Steel Square Pipe of size 25mm, 1.6mm thick as CENTRAL STIFFNER and fixing/welded to TABLE DINING ORS as shown on Drawing No. FD-165(M), applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Central Stiffner, complete all as specified and as directed.

Material and labour for Complete removing/scrapping old worn out Paint from TABLE DINING ORS (Drawing No. FD-165(M) by Sand Paper/Scrapper and applying Two Coats of Synthetic Enamell Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

Charpoy MS Tubing with plywood top (FD/MAP-II/01)

Material and labour for Plywood TOP 12mm thick BWR grade confirming to IS-303, ISI marked and fixing to CHARPOY MS TUBING WITH PLYWOOD TOP as shown on Drawing No. FD/MAP-II/01 including taking out unserviceable Plywood Top, complete all as specified and as directed.

Material and labour for MIDDLE STIFFENER made out from Mild Steel Square Tube/Pipe 25x25mm of 1.6mm wall thickness, adjusting existing 2 No. Stiffeners and fixing to CHARPOY MS TUBING WITH PLYWOOD TOP and fixing as shown on Drawing No. FD/MAP-II/01, applying two coats of Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer, complete all as specified and as directed.

Material and labour for Mild Steel CLIT of size 25x25x6mm with single hole on Short Rails for Support of Plywood Top and fixing to CHARPOY MS TUBING WITH PLYWOOD TOP and fixing as shown on Drawing No. FD/MAP-II/01, applying two coats of Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer, complete all as specified and as directed.

Material and labour for Complete removing/scrapping old worn out Paint on Steel Surfaces of CHARPOY MS TUBING WITH PLYWOOD TOP (Drawing No. FD/MAP-II/01 by Sand Paper/Scrapper and applying One Coat of Synthetic Enamell Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

Charpoy GI Pipe with Nylon Newar (FD-220)

Material and labour for Complete Removing of unservicable long rail and Supply and Fixing new long rail of GI tubing 32 mm bore medium grade (ISI marked) duly threaded both ends all as per drg.

Material and labour for Complete Removing of old unserviceable short rail and making of 2 Nos short rails from long rails obtained from item No. 13.01 and threading the both ends of short rails and fixing in position complete.

Material and labour for Complete Removing of old unserviceable legs and making of 2 Nos legs from short rails obtained from item No. 13.02 and threading the both ends of legs and fixing in position complete.

Material and labour for Complete Removing of unserviceable 3 way elbow and S & F new GI elbow 32 mm dia ISI Marked as per drawing.

Material and labour for Complete Removing of unserviceable check nuts and S & F new 32 mm dia GI Check nut (thickness of check nuts shall not be less than 8 mm) all as per drawing.

Material and labour for Complete Removing/taking down existing nylon newar from G.I. pipe charpoys and tightening before weaving with and including approved new white or light colour nylon newar (not made out of recycled nylon) 50 mm wide weight 140grams per 10 runnning metere, closely knitted on both sides and end of newar stiched around, weight of newar in each charpoy not less than 1.50. kg complete all as directed

Removing of unserviceable Ply Wood/MDF from Charpoy GI Pipe tightening of loose components of (i.e.complete charpoy ).S&F Plywood 12MM Thick BWR Grade ISI marked confirming to IS-303 of required size (out of 7’x3’). all as specified and as directed by Engr-in-Charge.

Removing of U/S MS Flat Iron Stiffner of GI Charpoy Plytop. S&F new flat MS Stiffner of size 900 x 50 x 5mm and fixed with Nut & Bolt of size 75 x 6MM as directed by Engr In Charge.

Locker Bed Side Steel (FD-257, 1029 & Built In)

Material and labour for SHELF made out of 1.0mm thick Mild Steel Sheet of LOCKER BED SIDE STEEL and made to shape and size as shown on Drawing No. FD-257 & FD-1029, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Shelf, complete all as specified and as directed.

Material and labour for DOOR made out of 1.0mm thick Mild Steel Sheet of LOCKER BED SIDE STEEL and made to shape and size as shown on Drawing No. FD-257 & FD-1029, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Door, complete all as specified and as directed.

Material and labour for LEG made out of 1.0mm thick Mild Steel Sheet of LOCKER BED SIDE STEEL and made to shape and size as shown on Drawing No. FD-257 & FD-1029, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Leg, complete all as specified and as directed.

Material and labour for aluminum HASP & STAPPLE of size 100mm for LOCKER BED SIDE STEEL and fixed as shown on Drawing No. FD-257 & FD-1029 including taking out unserviceable Hasp & Stapple, complete all as specified and as directed.

Material and labour for Chromium platedMild Steel HANDLE (as approved) of LOCKER BED SIDE STEEL and fixing to Almirah as shown on Drawing No. FD-257 & FD-1029 including taking out unserviceable Handle, complete all as specified and as directed.

Material and labour for Mild Steel HINGE (as approved) 50mm in size suitable for LOCKER BED SIDE STEEL and fixing to Almirah as shown on Drawing No. FD-257 & FD-1029 including taking out unserviceable Hinge, complete all as specified and as directed.

Material and labour for Complete removing/scrapping old worn out Paint from LOCKER BED SIDE STEEL (Drawing No. FD-257 & FD-1029) by Sand Paper/Scrapper and applying two Coat of , Synthetic Enamell Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed. Outer side of front doors of Locker Shall be painted in blue/brown colour and remaining portion shall be painted in Light Grey/Off White colour.

Rack steel 6 tier (FD-106 ,FD-1038)

Material and labour for SHELF made out of 1.0mm thick Mild Steel Sheet of RACK 6 TIER STEEL and made to shape and size as shown on Drawing No. FD-106/1038 applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Shelf, complete all as specified and as directed.

Taking out unservisiable ANGLE IRON and supply & fixing new angle iron fo size 40x40x4 mm for FD-1038 and 30x30x3mm for FD-106 of RACK 6 TIER STEEL alongwith PVC bush as shown on Drawing, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Shelf, complete all as specified and as directed.

Material and labour for Complete removing/scrapping old worn out Paint from RACK 6 TIER STEEL (Drawing No. FD-106 & FD-1038) by Sand Paper/Scrapper and applying two Coat of , Synthetic Enamell Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

Trestle store steel (FD-1043)

Material and labour for welding (full round of angle as a one spot) of broken part of TRESTLE STORE STEEL as shown on Drawing No. FD-1043, rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of (Black Colour) Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable part, complete all as specified and as directed.

Material and labour for Complete removing/scrapping old worn out Paint from TRESTLE STORE STEEL (Drawing No. FD-1043) by Sand Paper/Scrapper and applying One Coat of , Synthetic Enamell Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

Table 900x 900x760 mm steel (FD-1009)

Material and labour for TOP of TABLE 3'X3' WITH OUT DRAWER of Prelaminated post forming MDF Board 18/19 mm thick duly round edges, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHID), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing No. FD-1009 including taking out unserviceable Top, complete all as specified and as directed.

Material and labour for for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm (as required) for TABLE 3'X3' WITH OUT DRAWER as shown on Drawing No. FD-1009, necessary preperation of surfaces, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer complete all as specified and as directed.

Material and labour for removing/scrapping old worn out Paint from TABLE 3'X3' WITH OUT DRAWER (Drawing No. FD-1009) by Sand Paper/ Scrapper and applying Two Coats of , Synthetic Enamell Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Material and labour for welding (full round on pipe as a one spot) of broken part of TABLE 3'X3' STEEL as shown on Drawing No. FD-1009, rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable part, complete all as specified and as directed.

Bed Hard steel (FD/E6/MAP/08R)

Material and labour for HEAD SIDE BOARD of BED HARD MS TUBING of Prelaminated Particle Board 18/19mm thick, exterior grade, ISI marked and fixing as shown on Drawing No. FD/E6/MAP/08R including taking out unserviceable Head Side Board, complete all as specified and as directed.

Material and labour for FOOT REST BOARD of BED HARD MS TUBING of Prelaminated Particle Board 18/19mm thick, exterior grade, ISI marked and fixing as shown on Drawing No. FD/E6/MAP/08R including taking out unserviceable Foot Rest Board, complete all as specified and as directed.

Material and labour for Plywood TOP 12mm thick BWR grade confirming to IS-303, ISI marked and fixing to BED HARD MS TUBING as shown on Drawing No. FD/E6/MAP/08R including taking out unserviceable Plywood Top, complete all as specified and as directed.

Material and labour for MIDDLE STIFFENER made out from Mild Steel Square Tube/Pipe 25x25mm of 1.6mm wall thickness, adjusting existing 2 No. Stiffeners and fixing to BED HARD MS TUBING and fixing as shown on Drawing No. FD/E6/MAP/08R, applying two coats of Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer, complete all as specified and as directed.

Material and labour for Mild Steel CLIT of size 25x25x6mm with single hole on Short Rails for Support of Plywood Top and fixing to BED HARD MS TUBING and fixing as shown on Drawing No. FD/E6/MAP/08R, applying two coats of Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer, complete all as specified and as directed.

Material and labour for Complete removing/scrapping old worn out Paint on Steel Surfaces of BED HARD MS TUBING (Drawing No. FD/E6/MAP/08R by Sand Paper/Scrapper and applying One Coat of Synthetic Enamell Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

Form with Back (FD-78)

Material and labour for SEAT of FORM WITH BACK made of single plank of teak wood of size 1800x255x25mm as shown on Drawing No. FD-78 including taking out unserviceable seat, complete all as specified and as directed.

Material and labour for BACK of FORM WITH BACK made of single plank of teak wood of size 1800x150x19mm as shown on Drawing No. FD-78 including taking out unserviceable seat, complete all as specified and as directed.

Material and labour for for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm x1.6 mm thick(as required) for FORM WITH BACK as shown on Drawing No. FD-78 necessary preperation of surfaces, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer complete all as specified and as directed.

Material and labour for removing/scrapping old worn out Paint from FORM WITH BACK (Drawing No. FD-78) by Sand Paper/ Scrapper and applying Two Coats of , Synthetic Enamell Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Material and labour for welding (full round on pipe as a one spot) of broken part of FORM WITH BACK as shown on Drawing No. FD-78, rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable part, complete all as specified and as directed.

Form without Back (FD-77 &1027)

Material and labour for SEAT of FORM WITHOUT BACK made of single plank of teak wood of size 1800x255x25mm as shown on Drawing No. FD-77/ FD-1027 including taking out unserviceable seat, complete all as specified and as directed.

Material and labour for for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm x1.6 mm thick(as required) for FORM WITHOUT BACK as shown on Drawing No. FD-77 / FD-1027 necessary preperation of surfaces, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer complete all as specified and as directed.

Material and labour for removing/scrapping old worn out Paint from FORM WITHOUT BACK (Drawing No. FD-7&/ FD-1027) by Sand Paper/ Scrapper and applying Two Coats of , Synthetic Enamell Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Material and labour for welding (full round on pipe as a one spot) of broken part of FORM WITHOUT BACK as shown on Drawing No. FD-77/ FD-1027 rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable part, complete all as specified and as directed.

Teapoy Varandha (Fd/E6/MAP/18, FD 383 & FD-255)

Material and labour for TOP of TEAPOY VARANDHA of Prelaminated postforming MDF Board 18/19 mm thick, exterior grade ISI marked duly round edges(MAKE : GREEN PLY/CENTURY/ARCHID), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing No. FD/E6/MAP/18 or FD- 255 including taking out unserviceable Top, complete all as specified and as directed.

Material and labour for replacement of Broken Leg with Mild Steel Square Pipe of size 18mm x 1.6 mm thick / 20 mm round pipe 1.6 mm thick (as required) for TEAPOY VARANDHA as shown on Drawing No. FD/E6/MAP/18 and FD-1009, necessary preperation of surfaces, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer complete all as specified and as directed.

Material and labour for removing/scrapping old worn out Paint from TEAPOY VARANDHA (Drawing No. FD/E6/MAP/18 and FD-255) by Sand Paper/ Scrapper and applying Two Coats of , Synthetic Enamell Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Material and labour for welding (full round on pipe as a one spot) of broken part of TEAPOY as shown on Drawing No. FD/E6/MAP/18 and FD-255, rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable part, complete all as specified and as directed.

Chair School with Hand Board (FD/E6/MAP/05)

Material and labour for Moulded PVC/wooden saet and back of CHAIR SCHOOL WITH HAND BOARD as shown on Drawing No. FD/E6/MAP/05 including taking out unserviceable seat back, complete all as specified and as directed.

Material and labour for for Welding of Broken Leg with Mild Steel Round Pipe of size 20mm x 1.6 mm thick (as required) for CHAIR SCHOOL WITH HAND BOARD as shown on Drawing No. FD/E6/MAP/05, necessary preperation of surfaces, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer complete all as specified and as directed.

Material and labour for for hand board for CHAIR SCHOOL WITH HAND BOARD repalce with Prelaminated MDF board, Make - Greenply/Century/Archidply as shown on Drawing No. FD/E6/MAP/05, all as specified and as directed.

Material and labour for removing/scrapping old worn out Paint from CHAIR SCHOOL WITH HAND BOARD (Drawing No. FD/E6/MAP/05 by Sand Paper/ Scrapper and applying Two Coats of , Synthetic Enamell Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Material and labour for welding (full round on pipe as a one spot) of broken part of CHAIR SCHOOL WITH HAND BOARD as shown on Drawing No. FD/E6/MAP/05 rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable part, complete all as specified and as directed.

S&F HARD RUBBER/PVC SHOE superior quality (as approved) fixing to Leg of CHAIR SCHOOL WITH HAND BOARD as shown on Drawing No. FD/E6/MAP/05 including taking out unserviceable Shoe, complete all as specified and as directed.

Rack steel 1905x1830x760mm (FD-129) Material and labour for removing/scrapping old worn out Paint from Rack steel (Drawing No. FD-129 by sand paper/Scrapper and applying Two Coats of Synthetic Enamell Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Metal shelving Rack adj 3 tier (FD/BNR-04/2004 ) Material and labour for removing/scrapping old worn out Paint from Metal shelving rack 3050x900x500 mm (Drawing No. FD-GE/BNR-04/2004 by sand paper/Scrapper and applying Two Coats of Synthetic Enamell Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Rack shoe steel (FD/E6/MAP/02 (R) )

Material and labour for removing/scrapping old worn out Paint from Rack shoe steel Drawing No. FD-FD/E6/MAP/02 (R) by sand paper/Scrapper and applying Two Coats of Synthetic Enamell Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

S&F HARD RUBBER/PVC SHOE superior quality (as approved) fixing to Leg of Rack Shoe steel as shown on Drawing No. FD/E6/MAP/02 (R) including taking out unserviceable Shoe, complete all as specified and as directed.

Computer Table various size (TP,FD/E6/MAP/03)

Material and labour for for replacement of old/broken table top of COMPUTER TABLE with new table top made out of prelaminated post forming MDF Board 18/19 mm thick duly rounded edges, exterior grade ISI marked (Make : GREENPLY/CENTUARY/ARCHID) with 4mm TW beading all around duly polished all as shown in drg and as per the direction of Engr -in-Charge

Material and labour for for replacement of broken key board tray of COMPUTER TABLE with new key board tray made out of 18mm thick prelaminated exterior grade MDF Board (Make : GREENPLY/CENTUARY/ARCHID) all as shown in drg and as per the direction of Engr -in-Charge

Material and labour for for replacement of telescopic piano type hinges of broken key board tray of COMPUTER TABLE with new telescopic piano type hinges all as shown in drg and as per the direction of Engr -in-Charge

Rack side 4 space stee (FD-1023) Material and labour for removing/scrapping old worn out Paint from Rack side 4 spaces steel Drawing No. FD-FD-1023 by sand paper/Scrapper and applying Two Coats of Synthetic Enamell Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Table 2100x900x760 mm (FD-1013)

Material and labour for removing/scrapping old worn out Paint from Table 2100x900x760 mm Drawing No. FD-FD-1013 by sand paper/Scrapper and applying Two Coats of Synthetic Enamell Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Material and labour for removing old top from Table 2100x900x760 mm and replace with new top of prelaminated MDF board 18 mm, Make- Greenply/Century/Archidply Drawing No. FD-1023 complete all as specified and as directed.

Table bedside (FD/E6/MAP/15R)

Material and labour for removing old top from Table bedside and replace with new top of 18/19 mm thick exterior grade prelaminated partical board , Make- Greenply/Century/Archidply Drawing No. FD-FD/E6/MAP/15R complete all as specified and as directed.

Material and labour for removing old drawer with knob from Table bedside and replace with new drawer with knob of 18/19 mm thick exterior grade prelaminated partical board with knob Make- Greenply/Century/Archidply Drawing No. FD-FD/E6/MAP/15R complete all as specified and as directed.

Material and labour for removing old box from Table bedside and replace with new box of 18/19 mm thick exterior grade prelaminated partical board, Make- Greenply/Century/Archidply Drawing No. FD-FD/E6/MAP/15R complete all as specified and as directed.

Material and labour for removing back from Table bedside and replace with new back of18/19 mm thick exterior grade prelaminated partical board, Make- Greenply/Century/Archidply Drawing No. FD-FD/E6/MAP/15R complete all as specified and as directed.

Material and labour for removing/scrapping old worn out Paint from Table bedside Drawing No. FD/E6/MAP/15R by sand paper/Scrapper and applying Two Coats of Synthetic Enamell Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Book case steel (FD-1028)

Material and labour for in replacement of steel handle with new handle of size 100 mm long to fix in shutter of compartment of Book case steel Drawing No. FD-1028 complete all as specified and as directed.

Material and labour for in replacement of locking device with lock 50 mm dia four lever of Book case steel Drawing No. FD-1028 complete all as specified and as directed.

Material and labour for in replacement of broken glass 5.5 mm thick to shutter of compartment, where required with existing match of Book case steel Drawing No. FD-1028 complete all as specified and as directed.

Material and labour for removing/scrapping old worn out Paint from Book case steel Drawing No. FD-1028 by sand paper/Scrapper and applying Two Coats of Synthetic Enamell Paint (as approved) by Spray Painting Machine, complete all as specified and as directed. Outer side of front sliding doors of Book case Shall be painted in blue/brown colour and remaining portion shall be painted in Light Grey/Off White colour.

L.BHIMSEN

KRISHNA ASSOCIATES

PRAFUL ENTERPRISES