Improvement of WS SI and SD system of SLN Medical college and Hospital Koraput under AAP for the year 2025-26

Earth work in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge.

Cutting of B.T / C.C. road for taking C.I. pipes through.

C.C road cutting

B.T road cutting

Supplying all labour and T&P for laying trenches certifugally cast spum (Iron) pressure pipe Class-B confirming to I.S.1536 of different dia as per specification & direction of Engineer-in-charges.

200mm dia D.I.pipe (K7)

Supplying all labour and T&P for filling the trenches with excavated earth in layers and compacting etc. as per direction of the Engineer-in-charges.

Supplying all material, labour, T&P for laying in trenches D.I specials of the following diameter as per P.H. specification including carriage of materials from store to work site complete. as per the direction of Engineer- in- charge

Supplying all material labour and T&P for making of tyton joints using rubber rings of the following nominal diameter including testing of joints including cost of rubber rings as per P.H. design and specification as per the direction of Engg-In-Charge

DI – 200 mm dia

Supplying all labour and T&P for conveyance of surplus earth to the out skirt of town (within 5.Km) by mechanical means

Supplying all materials, labour and T&P for fixing of following size sluice valve , N.R valve & Air valve with double flanged end for water Work propose for the following rating and nominal diameter Including testing of joints as per specification & direction of Engineer-in-charge

Labour Charges of fixing of valve

200mm dia Sluice Valve

80mm dia C.I. Air valve

200mm dia flow control valve

Cost of valve

200mm dia Sluice Valve (P.N.1.6) Gland less of Kirloskar / Vag/ Audco /Talis or equivalent make

80mm dia Kinetic Air valve (PN-1.6) of Kirloskar / Vag/ Audco or equivalent make

200mm dia flow control valve

Supplying all labour and T&P for laying trenches M.S. pipe of following dia as per specification & direction of Engineer-in-charges. (including painting)

200mm dia M.S.pipe (6.30mm thickness)

Supplying all materials,labour and T&P such as welding machine,Oxyacetelen gas set and other consumables for fabricating following M.S.specials including welding charges as per direction of Engineer- in- charge etc all complete

200mm.dia. M.S.flange (12mm thick)

200mm.dia. M.S Offset bend (Plain):-

Supplying all materials,labour,T&P for cutting of M.S Plate/Pipe line work upto 6mm thick with cost of oxygen & acetelene gas transporation charges of all machineries etc all complete.

Supplying all materials,labour,T&P for butt or fillet welding to the M.S mambers at site by using welding machine & generator with transportation charges of machineries & cost of approved electrodes etc all complete.

Supplying all materials,labour and T&P and making flanged joints for MS pipes and specials of the following diameter including testing of joints as per specification all complete

200mm.dia flanged joint :-

Supplying all materials, labour and T&P for connection of existing rising line and distribution line including cutting existing line as per specification and direction of E.I.C

Supplying all materials,labour and T&P for construction of RCC thrust block as per specification and direction of E.I.C - Thrust Block for 111/4o Bend to 90o Bend - 2nos

Earth work in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge.

Filling foundation and plinth with sand watered and rammed.

Cement concrete (1:3:6) with 4cm size hard granite metal

Cement concrete (1:2:4) for R.C.C. works with 12mm size hard granite chips including hoisting and laying.

M.S. Reinforcement for R.C.C. works including cutting,bending, binding and tying grills and placing in position including cost of M.S.Rods, binding wire 18 to 20 gauge.

Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor.

Dry stone masonry or rough stone dry masonary with granite

Construction of brick masonry Sluice valve / Flow meter / control valve / PT etc. chamber as per P.H. design and specfication etc. all complete including covering the chamber with MS shutter with required MS febrication work with required size of MS angle / flate. (size 1.35 x 1.35 x 1.20) - 2nos

Earth work in all kinds of soil

Cement concrete (1:4:8) with 4cm size hard granite metal.

Brickwork with Fly Ash bricks in cement mortar (1:6) in Foundation and Plinth (23cm x 11cm x 8 cm)

12mm. thick C.P. in cement mortar (1:3) for brick work.

Cement concrete (1:2:4) for R.C.C. works with 12mm size hard granite chips including hoisting and laying.

Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor.

M.S. Reinforcement for R.C.C. works including cutting,bending, binding and tying grills and placing in position including cost of M.S.Rods, binding wire 18 to 20 gauge.

Fabricating, Supplying and fixing iron shutter with iron choukat made out of 35mm x 35mm x 5mm M.S. angle, 25mm x 6mm M.S. flat, and 18 guage M.S sheet fitted with aldrop, door handle, tower bolt etc complet.

Supplying all materials,labour and T&P and constructing brick masonry chamber as per P.H. specification and design all complete. S.V / Air valve chamber internal size:-[0.75x0.75x1.225mtr]

PLC panel for SLN Medical College pump House (PLC-SCDA I&C system at SLNMCH Pump house)

Level Transmitter - Designing, Supplying, installing,commissioning & testing of Ultrasonic level transmitter CE marked at each filter bed with following technical parameters Interfacing with PLC panel including mounting arrangement. Range - 0.5 mtr Output - 4.20 mA/HART Power supply - 24V DC ext. Display - 4" LED Accuracy - +/1 0.25% of full scale or batter Enclosure - IP 68

PLC panel for SLN Medical College pump House with two Pumps :- Design, manufacture, supply,installation, testing and commissioning of indoor type PLC panel of size approx. 1000mm X 700 mm X 1500mm (LBH), fabricated out of min. 2mm thick CRCA sheet powder coated to Siemens gray color.The Panel shall be provided with reputed make PLC with following accessories as well as input output configuration. The PLC shall be programmed with IEC 61131 standards for control, monitoring and communication of equipments & instruments at Raw water Pumphouse. PLC shall have Ethernet port & protocal for Modbus TCP communication with following IO. DI –16 num DO – 16 num AI –8 num AO – 4 num. 7 inch color TFT HMI complete with programming shall be provided to interact with PLC. The panel shall include all the accessories (not limited to following) to achieve p

urpose of smooth & trouble free operation of pump house.

Supply, installation and commissioning of LT surge arrester having 5KA capacity with spike and all accessories including cost of all materials, labour, T&P etc all complete.

UPS - Supply, installation and commissioning of single phase 1 KVA online UPS with pure sine wave & float cum boost charging with battery rack and maintenance fee battery system including cable power plug, switch having application in 24V lot DC battery (Drytype) charging to output continuous 3 hrs power backup all complete work (WTP-1 & MCC ROOM-1 Distribution-6)

GSM/GPRS modem - Supplying , Installing and Commissioning of SMS based ON / OFF operation of pumps at remote locations with test & trial including one year guaranty & two year comprehensive maintenance including SIM card & SMS charges. Wireless Motor Controller is suitable for all range of electrical motors and starters and pump sets. It shall protect pump set from dry run. Controller shall have inbuilt battery and charges automatically. Controller shall be controlled through SMS, Call, IVRS or Smart Phone application (All controlling modes are must). It shall have following features as, a. Auto Mode operation – Pump shall

Instrumentation, control and power XLPE cables along with the cable tray, glands, lugs and other accessories for interfacing the instruments at remote station with the RTU as per the technical specifications of Power Cable

Power Cable -ditto-4 core 4 mm2 copper cable

Control Cables-ditto- 3 core 1.5 mm2 copper cable

Control Cables-ditto- -20 core 1.0 mm2 copper cable

Instrument Cable- ditto- 2 Pair 1.0 mm2 cable

OFC: Supply and Laying of 12 core unarmoured Optical fibre cable ( OFC. Fiber glass with F-G 62.5/125micron, 2.6DB/KMF600) to various sites through HDPE pipe /in Air ( pole to pole ), prelaying testing of each cable drum for each fibre and tahing the OTDR traces,submission of OTDR traces (in hard as well as soft copy) to Engineer-in-charge/Site Engineer.

HDPE PIPE: Supply and Laying of 40MM(8Kg/cm2)dia HDPE pipe (Make: Supreme/equvalent) in cable trench as per specification and directions of Site Engineer / Engineer-in-Charge.(excluding earth work)

Designing, Supplying, Installing, commissioning & testing of Power Analyzer interfacing to PLC Panel with Modbus Communication Port, as per IEC 62053 and in the prescribed format including Mounting arrangement

Supplying, installation & commissioning of stainless steel ESE lightning arrester, single phase, radius coverage area 47m GI mast height 3m NFC17-102 & CPRI approved. All complete as per electrical specification and as per direction of EIC supply termination of 70sqmm x 1 core multi strand copper cable including all materials accessories and labour charges complete in all respects as per site requirements and direction of the Enginner in charge. Supply of chemical earthing with crystaline conducting materials for back fill compound & installation of maintenance fees earthing Electro with ISI mark CU/GI pipe dia 50mm2 meter long, Ground filling compound will be provided in 25kg per bag-2nos etc. all completed as per the site requirement.

Design,Drawing, Construction, Testing & Commisioning of 4.00 lakh ltr capacity RCC UGR and piping arrangement up to 5 Mtr from external face etc. all complete as per the direction of Engineer-in-charge.

Cost of materials.

200mm D.I. Pipe (K7)

200mm dia C.I mechanical joint socket

200mm dia C.I mechanical joint Collar

Cost of C.I. specials