REPAIRS TO ROAD POTHOLES PAVER BLOCKS ROAD MARKING AND ROAD FURNITURE OF KATARIBAGH AND NAVAL BASE KOCHI UNDER GE NW KOCHI

M & L for Repair to pot holes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 kg per 10 sq m, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings) depth of potholes exc 30 mm filling in screened & graded road metal, watering and well ramming (including supply of road metal) all as specified and as directed

M&L Preparing black top surfaces by brushing with wire brushes for removing cacked mud etc sweeping with broom and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc all as specified and as directed

M&L for applying evenly a priming/tack coat with bituminous primer at 5 Kg per 10 Sqm all as specified and directed.

M&L for Bituminous premixed semi dense asphaltic concrete 40mm 1 consolidated thickness with 5.5% binder content by weight of total mix (using Paving Bitumin Grade VG-30) rolled and compacted to required camber, gradient and super elevation with 8 to 12 tonne capacity mechanical power roller, mixed in hot mix plant and spread with mechanical paver all as specified and directed.

M&L for premix bituminous macadem (consolidated thickness 75mm or less) with 4% binder content by weight of total mix, using paving bitumen grade VG-30, roled and consolidated to required gradient and camber using 8 to 12 ton capacity mechanical power roller complete with paving bitumin complete all as specified and directed

M&L for preparation of New/Old Road surfaces and applying thermoplastic reflective paint for marking of minimum 2mm thick single coat as in centre line and edge line, zebra crossing, stop lines etc., road marking of 150/100mm width using 'HOT MARK' white or golden yellow by indigenous modern propelled road marking machine as directed including all ingredients such as blinder, glass beads titanium dioxide calcium carbonate inter filler, thermoplastic requirement for glass beads shall be the table No 800.4 of MOST specification including spraying of glass beads etc all as per manufacture's instructions complete all as specified and as directed.

S&F road reflective studs Cat's eye model No. 290 series made of ABS plastic body, size 90mmx110mmx17mm, dynamically designed, very high impact strength and fitted with 2 Nos highly reflective reflector at 3m/dark eve, fixed as per manufacturer's instructions complete all as specified and as directed.

S&F Road Stud (Cat Eye) of size 100x100x26 mm body made of non breakable polycarbonate with electronicallywelded prismatic retro- reflective lense on both sides for maximum retro-reflection in wet and dry condition. Body shall be dust proof. I e non dust accumulation on lense and space shall be built for finger grip, including fixing with bitumen adheshive BT-69 complete all as specified and directed.

S&F solar Cat Eye Aluminium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified and as directed

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m in depth for foundation, man holes etc and getting out in soft/loose soil all as specified and as directed