Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹1.0 CrAccepted-AOC 25 1777 A SJM BUILDING KINASSERY POKKUNNU P O KOZHIKODE 673007 | KOZHIKODE | KOZHIKODE | KERALA | 673007 | ₹1.0 Cr | 1 | Accepted-AOC Lowest quoted bidder 30.31per below estimate rate . Hence accepted |
| 2 | 2₹1.4 Cr+₹42.6 L (41.9%)Rejected-AOC PARAKKAL HOUSE CHERUVADI POST MAVOOR VIA CALICUT 673661 OFFICE ROOM NO F30 EMS STADIUM COMPLEX PAVAMANI ROAD PUTHIYARA POST CALICUT 673004 | CALICUT | KOZHIKODE | KERALA | 673661 | ₹1.4 Cr+₹42.6 L (41.9%) | 2 | Rejected-AOC Highest quoted bidder. Hence rejected. |
Tender Value
₹1.5 Cr
EMD Value
₹50,000
Closing Date
28 Jan 2025, 3:00 pmClosed
Executive Engineer
Executive Engineer Electrical circle PMU VADAKARA
The work includes Laying of 7059 meter of 11kV UG Cable of size 3X300 sqmm by HDD method, Doing straight joint, cable termination and Cable mounting, Erection of one number HT DP using PSC pole and fitting AB switches etc.
2024_KSEB_719559_1
No.e tender/04/24-25/dtd23-12-24
Open Tender
Electrical Works
Item Rate
90 days
Kollam Meppayur Road
Please refer Tender documents.
4 documents required · 4 mandatory
₹5,900
Yes
₹50,000
Yes
13 May 2025
24 Dec 2024
30 Jan 2025
26 Dec 2024
28 Jan 2025
26 Dec 2024
26 Dec 2024 - 4 Jan 2025
DEDICATED UG 11 KV FEEDER FROM 110kv SUBSTATION MEPPAYUR TO ELECTRICAL SECTION, MOODADI
Laying HT XLPE UG cable (of sizes beyond 3x185 sqmm and upto and incl. 3x300 sqmm) as per specification excl. Excavation and backfilling.
Doing straight joint on cables of sizes beyond 3x185 sqmmand upto and incl. 3x300 sq mm using the cable jointing kit supplied departmentally as per specification..
Mounting the cable ends of all sizes upto and incl. 3X300 sq mm with special type cable clamps incl. cost of extra materials if needed and giving necessary connections.
Doing one cable end termination on cables of sizes beyond 3x185 sqmm and upto and incl. 3x300 sq mm using the cable jointing kit supplied departmentally.
HT UG CABLE LAYING USING HDD METHOD INCL SUPPLY OF HDPE PIPE (PE100 PN8) CABLE MARKER ETC.
Transportation of 3x300 sq. Mm XLPE cable along with accessories from the store to a work site, using a hired vehicle, carrying up to 1 km length cable.
Loading 3x300 sq. Mm XLPE cable (500meter Drum) from its place of storage to department lorry/ hired vehicle safely and properly without causing any damage to its insulation and make ready for transporting as per the direction of department officers.
Unloading 3x300 sq. Mm XLPE cable (500meter Drum) from department lorry/ hired vehicle to work site and stacking properly without causing any damage to its insulation as per the direction of department officers.
Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading.
Loading HT PSC pole from the stacking place and unloading the same at work site (transport by vehicle).
Providing one Earth using earth pipe incl. Digging separate pit at standard distance away from the pole/structure & backfilling.
Fitting and erecting one HT PSC Pole in position incl. Fitting cross arm, digging & back filling pit, drawing earth leads.
Fitting and erecting one HT DP using PSC pole in position incl. Fitting 2 channel cross arms, digging & back filling pit, drawing earth leads.
Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole incl. conveyance of Materials.
Fitting one Additional 3m Channel cross arm (35x35x5mm), in existing 11kV DP incl. conveyance of materials.
Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP incl. conveyance of Materials.
Fitting one LT 4 line cross arm on HT or LT existing poles incl. fitting insulators and binding the same with LT Line.
Fitting one LT 2 line cross arm on HT or LT existing poles incl. fitting insulators and binding the same with LT Line.
Fitting one set AB switch and giving connection
Fitting one set (3No.) 11kV LA and giving connections excluding earthing.
Fitting one additional HT pin with insulator
Fitting one Additional V cross arm in existing single pole incl. conveyance of materials.
Fitting and providing one HT Stay for 11kV pole incl. Digging & back filling pit.
Providing one Coil Earth using GI earth wire, digging separate pit at standard distance away from the pole/structure & backfilling.
HRL ENTERPRISES (BID ID -2060268)
HRL ENTERPRISES
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .