Grooved Rubber Sole Plates

Item is reserved for procurement from RDSO approved sources (of item id: 3100584 and sub item id:3100584001) and its authorised dealer. RDSO approved OEM (of item id: 3100584 and sub item id:3100584001) or its authorised dealer should quote with tender specific authorization from OEM mentioning the tender number and opening date. Non-Compliance will result in summarily rejection of the offers submitted by dealer without any further reference.

MSME :- MSME benefit will be given to the vendor having Udyam registration with MSME as per the policy guidelines issued by MSME.

LIQUIDATED DAMAGE (LD) ON DELAYED SUPPLY: For delayed supplies, Recovery of Liquidated Damage (LD) shall be levied @1/2% (half percent) of the price of the store per week or part of the week during which delivery is accepted and the upper limit for recovery of LD in supply contracts is 10%(ten percent) of the value of contract irrespective of delays, unless otherwise provided, specifically in the contract

Packing Instruction: Suitably covered with biodegradable transparent polythene and packed in wooden cage: Bottom frame to be made of wooden planks 20mm thick & should have support of at least 3 wooden batons of size 100x100mm of suitable length to facilitate lifting by fork lifter. Each panel to be packed in wooden cage of suitable dimensions made out of wooden strips of 20x100mmsize. Gap between each strip should not be more then 100mm. The material used for product packaging shall be eco-friendly. A list should be pasted on each wooden cage showing order no, PL no, Description of the item, drg. No/ spec. No, qty, firm's name & address and date of despatch etc.

Firm to note that single use plastic should not be used in packing, if material to be supplied otherwise it will be rejected. Collection of non- bio degradables old waste after successful delivery of the product/material from consignee place will be arranged by the supplier.

Collection of Bio Waste: Collect back scheme for packing waste under SWM: Collection of non - biodegradable solid waste after successful delivery of the product /material from consignee place will be arranged by the supplier.

The bidder confirms that Rates and other financial terms quoted in relevant columns of financial bid will only be ruling terms for acceptance, and such terms quoted anywhere else should be ignored. (Denial of this condition not (recommended).

In case of MRP in case item is supplied in standard pkg or otherwise with MRP printed, the consignee shall ensure that PO rates shall not be more than MRP printed on the pkg or otherwise. In case, PO rate is more than MRP rates, then consignee should immediately inform PO issuing authority, bringing out the details of MRP and PO rates so that suitable amendment in rate can be issued by PO issuing authority. Only after receipt of amendment, bill should be forwarded. The despatch/delivery details against this purchase order should be advised to the undersigned invariably.

Inspection by consignee.

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

I/we the tenderer (s) am/are signing this document after carefully reading the contents.

I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.

I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of contract or payment, the master copy available with the railway Administration shall be final and binding upon me/us.

I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.

I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.

I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.

I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.

I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the EMD and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.

I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Security Deposit and may also lead to any other action provided in the contract including banning of business for a period of upto two year.

I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)