SPL REPAIR TO BLDG NO M 35 AND SPL REPAIR TO 04 X WASHROOMS BLOCK NO 03 TO 06 OF SM BK BLDG NO P 13 EME AT PALAMPUR MIL STN

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n. exc. 1.5 sq.m each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n. exc. 1.5 sq.m each and fixing in same opening complete all as specified and directed.

Taking down chowkats or frames but with shutters (with out taking off shutter from the frames) exc 1.5 sq.m but n. exc 4 sq.m each, complete all as specified and directed.

Taking down shutter of any description exc 1 sq.m but n. exc 2 sq.m each. complete all as specified and directed.

M & L second class soft-wood clean sawn as in vertical post,scantling for ceiling or roof truss member etc complete all as specified & directed.

S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying and fixing in opening as per specifications & directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat molded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified & directed.

S&F 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F 150 mm size (length of bolt) aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work precast concrete articles complete all as specified and directed.

M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in Cement mortar 1:6, complete all as specified and directed.

M&L walling of random rubble, un-courses, well bonded bedded & solidly hearted built in cement mortar 1:4, complete all as specified and directed.

Rendering 15mm thick plaster on stone masonry or other than fair faces of brick wall in cement mortar 1:6 finished even and fair without using extra cement, complete all as specified and directed.

Rendering 15mm thick plaster on fair faces of brick work/stone masonry, concrete surface in CM 1:4, finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L exterior painting work till top surface of existing plater and crack filling with crack seal upto 3mm where required and making good/smooth the surface with wall putty with silicon additive and sandaling the surface for removal of loose particles and applying one coat of smart care waterproof primer (Damp Prime Suprema) on walls and chajjas with 10% dilution of water and applying two coat of 100% acrylic smooth emulsion exterior grade with silicon antive and anti algal properties (Apex Ultima Suprema) complete all as specified and directed. Note: The above specification for exterior painting is guaranteed for 8 years performance warranty and to be executed only by original equipment manufacturer.

M&L preparation of newly plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion and applying plaster of paris putty of 1mm thick over newly plastered wall surfaces including preparation of surface even and smooth complete all as specified and directed.

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Demolition of cement concrete unreinforced in ground floors, kota stone, granite flooring, tiles flooring and pavings not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified & directed.

M&L RCC 1:2:4 nominal mix type B0 using 12.5mm graded crushed stone aggregate as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified, compete all as specified and directed. (Colour as approved by GE)

M&L pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, facia and fixed with self tapping screws as specified. (Colour as approved by GE)

Providing and fixing tiled false ceiling of size 595x595mm in true horizontal level suspended on interlocking gyproc metal grid of hot dipped galvanized steel section (galvanized @ 120 gms/sqm, both side inclusive) consisting of 3600mm long main "T" runner size 24x38mm and 0.30mm thick, 1200mm long cross "T" of size 24x25mm and 0.30mm thick, 600mm secondary cross "T" of size 24x25mm and 0.30mm thick and PPGI wall angle of size 24x24mm and 0.4mm thick, bottom exposed capping of width 24mm of all T-sections shall be of 0.25mm thick PPGI, wall angle is fixed along the perimeters of the ceiling to walls, partitions or columns etc with rawl plugs and wooden screws at 300mm centers Main "T" runners are then suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 8mm dia and 45mm long dashfasterners, 4mm GI adjustable rods with galvanised butterfly level clips of size 85x30x0.8mm spaced at max 1200mm center to center along main T and not more than 150mm from spliced joints. The last hanger at the end of each main runner should not be greater than 600mm from the adjacent = wall, then 1200mm long cross "T" is interlocked between the main "T" at 600mm center to center to form a grid of 1200x600mm and then secondary cross "T" of length 600mm is then interlocked at middle of the 1200x600mm grid to form grids of 600x600mm. Cross tees at the ends having length more than 600mm are to be supported independently. Finally whitecoloured Gyproc 8mm thick Dew Drop/Granular tiles of size 595x595 having foil on back side & PVC paper on front side wrapped around edges to be placed in grid complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wll paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed.

S&F solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet used instead of plain colour sheet inclusive of solvent cmeent and fixing at site on PVC frame as per specification and drawing (or without PVC frame work), fixed in repair complete all as specified and directed.

S&F 30mm thick flush shutters, solid core construction, with partical board core and covered with decorative face veneer with lipping/frame to match on both sides complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work precast concrete articles complete all as specified and directed.

M&L 50mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection/footpath finished even and smooth without using extra cement complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in floors finished rough to receive floor finishes, complete all as specified and directed.

M&L 25mm thick PCC 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as in floors finished rough to receive floor finishes, complete all as specified and directed.

M&L Non-skid, coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm as in floors etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:4, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles complete all as specified and directed.

M&L Vitrified Ceramic tiles 10mm thick (square / rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15 mm thick screed bed or bedding layer in CM 1:4 complete all as specified.

M&L Vitrified Ceramic tiles 10mm thick (square / rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm, in skirting/dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 10 mm thick backing coat in CM 1:4 complete all as specified.

M&L Glazed ceramic coloured tiles in vertical surface 350mm x 250mm x 7mm/450mm x 350mm x 7mm/450x300x7mm/600x300x7mm thick set and jointed in neat cement slurry, pointed in white or coloured cement to match the colour of tiles, over and including 10mm thick backing coat in CM 1:4 to receive tiles, including dismantling complete all as specified and directed.

M&L 20 mm thick granite (of any type) work (table rubbed and polished and moulding of outer edges) for wall lining (Veneering to wall) with and including 10mm thick in CM 1:3 and pointed in white cement (1:2) using marble dust with admixture of pigments to match with shade of granite, complete all as specified and directed.

M&L PCC 1:3:6 type C2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

S&F compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. Fe-410 W(Gde-E-250) quality-B, complete all as specified and directed.

S&F in repair aluminium (extruded section body) door coser hydraulically regulated, designation No. 3 universal type suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed.

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including fixing fittings such as GI nipple for inlet, outlet, washout and overflow etc, including 20mm size ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe including dismantling of tank complete all as specified and directed.

S&F in repair vitreous china premium/1st quality wash down water closet wall hung EWC white/ivory/gel gasket etc. including fixing of plastic water closet seat cover, block/white closed pattern with flat bottom and cover and mild steel chromium plated hinging device (excluding flushing cistern & flush pipe) complete all as specified and directed.

S&F concealed self closing valve for wall mounted WC, 32mm dia, PVC flushing pipe, PVC connection 15mm size with PTMT nuts of length 450mm and with CP brass coupling & PVC washer at both ends, complete all as specified and directed.

S&F vitreous china, wash basin white, oval type 550mm x 400mm including brass Chromium Plated waste coupling 32mm size with long screwed shank and fly nuts, flange end bedded in red lead cement,PVC medium grade 32mm size waste pipe, PVC connection 15mm size, 450mm long with PTMT nuts at both ends (fixed in repair), complete all as specified and directed.

S&F 32mm bore low density polyethylene (LDPE) pipes of pressure rating 6 Kgf/sq.cm for low level cistern and waste pipe for sink, washbasin complete all as specified and directed.

S&F in repairs PVC coated mild steel conduit pipe 25mm dia (Drapery rod) with PVC coated MS clamps to hold drapary rod and decorative attachment at one or both ends of drapary rod, fixed to opening of door/windows, each opening n exc 1.50 mtr, contained with a pair of clamps and ap pair of side ornamental attachments complete all as specified & directed.

S&F in repairs, fancy type, chromium plated, bib cock, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified & directed.

S&F in repairs CP stop valve/angle valve (one way or two way as per requirement at site), cast copper alloy, fancy type,chromium plated, screwed down, high pressure, with crutch or butter fly handle, screwed both ends 15 mm bore iron pipe or for union complete all as specified & directed.

S&F in repairs CP stop valve/angle valve, concealed type (one way or two way as per requirement at site) with long shank and cup, cast copper alloy, fancy type,chromium plated, screwed down, high pressure, with crutch or butter fly handle, screwed both ends 15 mm bore iron pipe or for union complete all as specified & directed.

S&F in repair CP jet spray hygenic spray jet for 15mm bore dia fittings 1 to 1.5m long tube acrylic type complete all as specified and directed.

S&F in repairs health faucet (ABD body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F Brass chromium plated mixer for mixing hot and cold water, screwed down for iron pipe for 15mm dia bore pipe, fixed in repair, complete all as specified and directed.

S&F PVC connection 15mm size, 600 mm long with PTMT nuts complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125mm size, with or without swivel joints, including shower arm 15mm size, 195mm long with bend of 45 degree with flange of CP any colour, fixing to steel pipe or union complete all as specified and directed.

Dismantling 75mm bore cast iron or reinforced concrete drain pipes, PVC pipe jointed in cement mortar, solvent etc and taking out of trenches if required complete all as specified and directed.

Dismantling 100/110mm bore cast iron or reinforced concrete drain pipes, PVC pipe jointed in cement mortar, solvent etc and taking out of trenches if required complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints fixed in walls including fixing clamps etc. complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints as in floors / laid in trenches, complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints fixed in walls including fixing clamps etc. complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints as in floors / laid in trenches, complete all as specified and directed.

S&F 75mm bore PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends in any radius complete all as specified and directed.

S&F 100/110mm bore PVC (SWR) bends in any radius complete all as specified and directed.

S&F in repairs soap dish vitreous china white,approximate size 160mm x 160mm x 90mm fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified & directed.

S&F steel water tubing, 15 mm bore, galvanised , "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor (including chiseling or groove cutting of stone masonry for concealed type tubing incl all necessary means) including taking down complete all as specified and directed.

Fixing only steel water tubing, 15 mm bore, galvanised , "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor (including chiseling or groove cutting of stone masonry for concealed type tubing incl all necessary means) including taking down complete all as specified and directed.

S&F steel water tubing, 20 mm bore, galvanised , "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor (including chiseling or groove cutting of stone masonry for concealed type tubing incl all necessary means) including taking down complete all as specified and directed.

Fixing only steel water tubing, 20 mm bore, galvanised , "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor (including chiseling or groove cutting of stone masonry for concealed type tubing incl all necessary means) including taking down complete all as specified and directed.

S&F steel water tubing, 25 mm bore, galvanised , "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor (including chiseling or groove cutting of stone masonry for concealed type tubing incl all necessary means) including taking down complete all as specified and directed.

S&F anodised aluminium frame for doors, windows, ventilators with minimum thickness of powder coating 50 micron with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc. 0.5 sq.m in each pane complete all as specified and as directed.

S&F Powder coated Anodised aluminium window and ventilator shutters (minmium thickness of powder coating 50 micron), weight of aluminium section not less than 0.914 kg/m for style and rail, weight of glazing clip not less than 0.124 Kg/m including necessary joining cleats, glazing clips, rubber neoprane packing,anodised aluminium snap beading,screws,anodised aluminium fittings such as peg stays one number,hinges type B-21, 100 mm long two numbers,suitable handle one number on each shutter complete all as specified and directed.

M&L preparation of new surfaces of steel of any description, over 10 cm width or girth not other wise described and appliying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed.

Prepartion of old wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

Prepartion of new wooden surfaces of any description not otherwise described, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.

S&F 18/19mm thick block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face, complete all as specified and directed.

S&F auto closing hinges 35mm of 0 degree crank (KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters fixed in repairs complete all as specified and directed.

S&F ball bearing runners 45mm Telescopic (KTS-20) full extension load capacity 50 Kgs complete all as specified and directed.

S&F stainless steel handles 100mm size for kitchen cabinet shutters fixed in repair complete all as specified and directed.

S&F chromium plated stainless steel wire bracket (storage basket) pull out type for large utensils size 480 x 500 x 150mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed.

S&F chromium plated stainless steel wire bracket (cup and saucer basket) pull out type for large utensils size 380 x 500 x 100mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed.

S&F chromium plated stainless steel wire bracket (plate basket) pull out type for large utensils size 380 x 500 x 100mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed.

S&F chromium plated stainless steel wire bracket (Cutlery basket) pull out type for large utensils size 380 x 500 x 100mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed.

S&F, 75 mm size, hasp and staple, safety type aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified & directed.

S&F 40 mm size (Width of flaps when open) continuous paino hinges, mild steel, bright finish or electrogalvanised complete all as specified & directed by Engineer-in-charge.

S&F pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and tarring back side of frame, complete all as specified and directed.

S&F 35mm thick factory made 2nd class hard wood rail and style plain framed, panelled shutter with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 (part 1) kiln seasoned and chemically pressure treated complete all as specified and directed.

M&L plain cement concrete 1:2:4 type B-0 using 12.50 mm graded stone aggregate cast in situ in lintels up to 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straight or curved) complete all as specified & directed.

S&F 150 mm size extruded aluminium alloy handles, cast type, anodised complete all as specified and directed.

S&F 100 mm size extruded aluminium alloy handles, cast type, anodised complete all as specified and directed.

S&F 100 mm size (length of bolt) aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F Steel locking bolts with mild steel electro galvanised plate and bright bolt not less than 10mm dia, 100mm size complete all as specified and directed.

S&F 300 mm size (length of bolt) aluminium alloy, anodised, sliding door bolt with hasp and staple ,(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F 300mm, ordinary door springs including roller and roller plate complete all as specified and directed.

S&F 1st class softwood small fitting such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like including all necessary labours articles n.exc 200 Cu.cm each complete all as specified and as directed.

S&F brass chromium plated tubular towel rail, 20mm dia, D type 60cm long , fixed to wall with CP brass screw and PVC rawl plugs, complete all as specified and directed.

M&L preparation of old surfaces of steel of any description, over 10 cm width or girth not other wise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

M&L Non-skid, coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm as in floors etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling of stone slabs,paver blocks and tiles of any description or thickness in floors,path apron etc laid dry or laid dry and pointed surface complete all as specified and directed.

M&L granite of any type tiles 15 to 20mm laid over and including 15mm thick screed bedding in CM 1:6 machine cut, bedded and jointed with grey cement slurry and pointed with cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

S&F in repairs vitreous china squatting pan, 'orissa' pattern, size 580 x 440 mm white , with integral foot rests (excluding flushing cistern and flushing pipe) with polythene float and flynut complete screwed for iron pipr or brass ferrule and fixed complete all as specified and directed.

S&F vitreous china wash down water closet pan (Pedestal pattern) EWC white connected to drain or out going pipe and flushing pipe complete as in repair including PVC sheet cover closed recessed type with flat bottom, and cover with mild steel chromium plated or aluminium hinging device complete all as specified and directed.

M&L 10 litres capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32mm dia PVC flushing pipe and 15mm dia, 450mm long PVC connection with CP brass coupling nuts and PVC washer at both ends (fixed in repair), complete all as specified and directed.

S&F in repairs vitreous china wash basin, oval type centre top size 550 x 420mm excluding tap, waste, chain, plug and porcelain stopper but incl brackets, cutting for and pinning in ends brackets or erecting stand incl waste pipe complete all as specified and directed.

S&F in repairs vitreous china urinal half stall type white of size 400x590mm with integrated spreader (excl flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F in repairs stop valve/angle valve, cast copper alloy, fancy type, chromiun plated, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for 15 mm bore iron pipe or for union complete all as specified & directed.

S&F in repairs, chromium plated, bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified & directed.

S&F in repairs, fancy type, pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' & 'Cold' with long screwed shanks and fly nuts, screwed for 15 mm bore iron pipe complete all as specified & directed.

S&F in repairs 32mm waste coupling of PTMT (half or full threaded) minimum weight 32mm-45gms/40mm-60gms) complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connection, including cleaning for refixing or removal from site, complete all as specifed and directed..

S&F steel water tubing, 15 mm bore, galvanised , "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor complete all as specified and directed.

S&F in repairs old steel tubing medium grade 15mm bore and connection in new or old position (walls, ceiling, floors etc) complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connection, including cleaning for refixing or removal from site complete all as specified and directed

S&F steel water tubing, 20 mm bore, galvanised , "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor complete all as specified and directed.

S&F in repairs old steel tubing medium grade 20mm bore and connection in new or old position (walls, ceiling, floors etc) complete all as specified and directed.

S&F PVC waste pipe 32mm or 40mm dia 1000mm long for WHB/sink complete all as specified and directed.

S&F PVC connection 15mm size, 450 mm long with PTMT nuts complete all as specified and directed.

S&F in repairs PVC soil waste pipe 110mm bore single socketed, in any length with rubber rings joints, fixed in wall with clamps etc complete all as specified and directed.

S&F PVC soil waste pipe 110mm bore single socketed, in any length with rubber rings joints, laid in trenches or in floors with clamps etc complete all as specified and directed.

S&F PVC soil waste pipe 75mm bore single socketed, in any length with rubber rings joints, laid in trenches or in floors with clamps etc complete all as specified and directed.

S&F in repairs PVC soil waste pipe 75mm bore single socketed, in any length with rubber rings joints, fixed in wall with clamps etc complete all as specified and directed.

S&F 110mm bore PVC branch pieces double Tee equal or unequal with oval access door ,complete all as specified and directed.

S&F 75mm bore PVC branch pieces double Tee equal or unequal with oval access door ,complete all as specified and directed.

S&F PVC (SWR) vent cowl 75mm bore dia, complete all as specified and directed.

M&L PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in filling under sunken floors complete all as specified and directed.

S&F High performance two component brushable elastomeric poly urea waterproofing coating cold applied brush applied ultraseal BA or approved equivalent (in sunken portion of WC & floor trap) liquid membrane with white in colour with a elongination of 500% and tensile strength of 5 N/sq mm @ DFT 1mm as per ASTM D 2370.73 % solid content, shore A hardness of min 70. The system include final base preparation, epoxy primer application @200-250 gms/sqmt depending upon the surface porosity and applying home shild ultraseal BA or approved equivalent in two coats at 1.5 kg sqm providing 1.2 mm DFT etc, complete as per manufacture specification.

M&L 15mm thick (average) screed bed/plaster in cement mortar 1:3 in order to maintain proper slope and base in sunken protion of WC & floor trap for surface for laying of APP based polymeric membrane, mixed with water proofing compound as per manufacturer's instructions finished even and smooth without using extra cement complete all as specified and directed. Note:- WPC and polymeric membrane shall be measured and paid separately)

M&L preparation of old surface of ceiling and applying two coats of white wash on old decorated surface complete all as specified and directed.

Taking down cement plaster including tiles of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

Rendering 10mm thick plaster on fair faces of brick work/stone masonry, concrete surface in CM 1:6, finished the surface even and smooth without using extra cement complete all as specified and directed.

Rendering 15mm thick plaster with WPC on fair faces of brick work/stone masonry, concrete surface in CM 1:4, finished the surface even and smooth without using extra cement complete all as specified and directed.

Rendering 5mm thick on ceiling in CM 1:3 finished the surface even and smooth without using extra cement complete all as specified and directed.

Taking down carefully existing aluminium / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed.

Taking down unsv DB of any size and capacity including MCB etc and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

Taking down unsv sub main wiring of any type and any size from wall, ceiling etc. complete all as specified and directed.

M&L point wiring for one light/fan/call bell point controlled by one 5 Amp switch with 1.5 Sqmm PVC (FRLS-H) insulated unsheathed multi stranded copper conductor cable 1100 volts grade single core conforming to IS-694-1990 and including one run of continous earth wire to common earth and connected to earth with 1.5 Sqmm PVC (FRLSH) insulated unsheathed multi stranded copper conductor cable draw in & incl PVC surface casing 'N' capping double lock type to be fixed with the help of rawal plugs & screws incl all fittings such as Tee, connector pieces, L-junction etc on joints including polycarbonate/PVC sunk boxes mounting modular switches, sockets, regulators etc and making good disturbed surfaces with CM (1:4) to match with the existing surface complete all as specified and directed. Notes : (a) Wiring shall be done by using proper colour coding.

All as per the description of serial item No 140 here-in-before but one 5 pin socket outlet, 6 amps on the same board complete all as specified and directed.

All as per the description of serial item No 140 here-in-before but one 5 pin socket outlet, 6 amps, independent complete all as specified and directed.

All as per the description of serial item No 140 here-in-before but for one 5 pin socket outlet 16 Amps on Independent board with cables 2.5 sqmm size complete all as specified and directed.

S&F bell, AC 230 volt single pole complete all as specified and directed.

S&F modular bell push 6A 1 Module 240 volts ISI marked complete all as specified and directed.

S&F modular switch one way 6 Amp, one module 240 volt ISI marked complete all as specified and directed.

S&F socket, 6A - 2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and directed.

S&F socket 6A/16A - 2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and directed.

S&F modular switch 1 way 16 A, 1 module, 240 volts ISI marked complete all as specified and directed.

S&F modular white cover plate 8M complete all as specified and directed.

S&F modular white cover plate 6M complete all as specified and directed.

S&F modular white cover plate 3M complete all as specified and directed.

S&F modular white cover plate 1M complete all as specified and directed.

S&F single pole and neutral enclosure with 1 two pin and earth plug and a socket complete with one single pole MCB, 20 Amp, 240 volts ISI marked complete all as specified and directed.

S&F ceiling rose, 3 terminal surface type complete all as specified and directed.

S&F angle lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F decorative ultra slim LED tubelight fitting of LED with extruded polycarbonate, environmental friendly energy efficient rady to use, 20 watt, 6500K fitting, including reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed.

S&F decorative ultra slim LED tubelight fitting of LED with extruded polycarbonate, environmental friendly energy efficient rady to use, 5 watt, 6500K fitting, including reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed.

S&F fancy lights with LED bulb holder plastic housing with clear prismatic diffuser, with IP 42 compelte all as specified and directed. Note: The item must be brought as per sample approved by GE.

S&F in replacement Recess mounted slim LED luminaire with drop down diffuser light 36W having 600x600mm, 230 volts AC corrosion resistent complete all as specified and directed.

S&F focus lights 15 watts, IP 67 protection with clear prismatic diffuser, complete all as specified and directed. Note: The item must be brought as per sample approved by GE.

S&F bed side light 3 watts, IP 42 protection with clear prismatic diffuser, complete all as specified and directed. Note: The item must be brought as per sample approved by GE.

S&F factory made CRCA sheet power coated double door panel board 2mm thick, of size 70x70x20 cm, with Aluminium bus bar, Mounting rail for meters MCCB & MCB SPN, wall mounted type partially grouted in wall with locking arrangement, handle and making good disturbed surface as well as matching with existing whitewash colour/surface and including provn of following and connection all as specified and directed:- (a) MCCB 100A, 415 Volts- 01 No. (Incoming) (b) MCB SPN, 32A, 230 volts- 05 Nos (Outgoing for each guest house and 1 common for outside lights points) (c) Single phase meters- 04 Nos (For each guest house) (d) Three phase meter- 01 No.

M&L in replacement for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 6 Sq mm for phase and neutral and one run of 6.0 Sq mm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the medium grade ISI mark PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length complete all as specified and directed. Note:-1. Wiring shall be done in proper colour coding.

M&L disbribution board sheet steel powder coated for MCB with rated bus bar and neutral link earthing stud SPN 8 way 240 volts double door complete all as specified and directed. Note: Distribution board and MCB's should be same make.

S&F in replacement SPN 40 Amp rating 240V, 10 KA, 'C' curve MCB and current carrying capacity in the MCB DB complete with connection testing and commisioning complete all as specified and directed.

S&F in replacement 240V, 10 KA, 'C' curve MCB SP and current carrying capacity 6 to 40 amps, in the MCB DB complete with connection testing and commisioning complete all as specified and directed.

Disconnecting/taking down ceiling fan/ Exhaust fan of any sweep removing and cleaning the dust properly, painting with same colour with good quality synthetic enemelled paint after preparing surface for painting with existing colour shade, oiling and greasing of bearing including refixing and making the connection and testing complete all as specified and directed.

M&L cutting and taking out old burnout winding of any sweep ceiling fan/exhaust fan and rewinding with same gauge of copper winding wire of superior quality including insulation material varnishing etc and testing complete all as specified and directed.

Taking down old unserviceable electric water geyser, S&F new electric water storage Heater (vertical type Geysers) 25 Ltrs BEE RATING 5 STAR, 230 volts AC single phase with and including grouting with high tensile rag bolt, nut & washer etc as directed as per site requirement and making necessary inlet /outlet water connection for Geysers. Geysers to have glass lines tank, fero glass coated container, PUF insulation, glass coated heating element, thermostat cut off etc.complete all as specified and as directed. Note:- Old unserviceable electric water heater to be deposited in MES store yard.

S&F 250mm sweep exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding, 5 star rated complete all as specified and directed.

Disconnecting water heater and taking in safe custody/refixing the same including fastner and making the connection and testing complete all as specified and directed.

S&F electronic meters temper proof LCD display with polycarbonate cover single phase 230V, 10-60A accuracy class-1, 50 Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage & KWH complete all as specified and directed.

S&F electronic meters temper proof LCD display with polycarbonate cover three phase 415V, 10-60A accuracy class-1, 50 Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage & KWH complete all as specified and directed.

S&F 300mm sweep exhaust fan made of steel body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding, 5 star rated complete all as specified and directed.

Earthing complete with galvanised iron earth plate electrode of size 600mm x 600mm x 6mm thick buried directly under ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 metre below ground level, connected to galvanised earth lead wire 4.0mm by means of bolts, nuts, check nuts, and washers including test point by means of bolts, nuts, check nuts and washers of galvanized iron and connected to main switch/ control board up to 7.5 metre away from earth electrode and including GI pipe light grade 40mm bore protection pipe & necessary excavation and earth work in any strata, PCC chambers in PCC 1:3:6 type B1, RCC 1:2:4 type B1 cover slab 50mm thick with 8mm dia TMT bars at 140mm C/C both ways, with lifting handle, watering pipe of GI medium grade 40mm dia, wire mesh, funnel, lugs and charcoal, salt etc all as applicable and as per plate No 3 of SSR Part-1 and all as specifird and directed

M/s ASS Construction Co (BID ID -3149585)