Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.3 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹37.3 L+₹1.3 L (3.60%)Rejected-Finance | L2 | Rejected-Finance Not the lowest bidder | |
| 3 | L3₹38.1 L+₹2.1 L (5.87%)Rejected-Finance | L3 | Rejected-Finance Not the lowest bidder | |
| 4 | L4₹38.2 L+₹2.2 L (6.23%)Rejected-Finance | L4 | Rejected-Finance Not the lowest bidder | |
| 5 | L5₹38.4 L+₹2.4 L (6.69%)Rejected-Finance 79 O P ROAD NAYABASTI P O P S BARRACKPORE DIST NORTH 24 PARGANAS PIN 700 120 WB | 24 PARAGANAS NORTH | WEST BENGAL | 700120 | L5 | Rejected-Finance Not the lowest bidder |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
28 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Barrackpore
Office of the Garrison Engineer Barrackpore, Kolkata-700120
REPAIR AND MAINTENACE OF IRON REMOVAL PLANTS, WATER SUPPLY PUMPS AND MOTORS ALONG WITH CONNECTED ITEMS AND REPLACEMENT OF CI/DI/GI WATER SUPPLY PIPELINE AND OTHER MISC WORKS AT KANCHRAPARA UNDER GE BARRACKPORE
2022_MES_533509_1
8659/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
Barrackpore
Refer to tender documents
3 documents required · 3 mandatory
₹500
GE Barrackpore
₹70,000
Yes
30 Aug 2022
24 Jun 2022
30 Jul 2022
24 Jun 2022
28 Jul 2022
15 Jul 2022
Amount
Excavation in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft loose soil complete all as specified and directed.
Returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25 cm complete all as specified and directed
Removing excavated soil not exc 50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed
M&L for lead wool joint with all jointing materials such as lead, rope manila etc as required of site for repairing to leakage after removing /buring of old lead joint from CI/DI pipe etc complete with tool & plant of following size of CI/DI pipe (Note : Excavation, returning filling and removing of earth work shall be measured and paid separately) :-
CI/DI Pipe of 200mm bore
CI/DI Pipe of 150mm bore
CI/DI Pipe of 100mm bore
CI/DI Pipe of 80mm bore
S&F of double flanged non rising/rising spindle sluice valve following dia of PN 1.6, as per IS 14846 and IS1538, cast iron as per IS-210 Gr FG260, SS spindle, Bronze body seat ring, Bornze wedge ring, gland packing-jute & hemp, Natural rubber gasket, Bornze stem nut with spining wheel complete including taking out existing unserviceable sluice valve complete all as specified and directed:-
Sluice valve of 200mm dia
Sluice valve of 150mm dia
Sluice valve of 100mm dia
Sluice valve of 80mm dia
S&F of Non return sulice valve following bore confirming to IS-5312 Part-I, pressure rating PN1.6, Flange drilling as per IS-1538, CI valve body diaphragm, CI disc, Disc face ring -rubber, Aluminium hinge pin, CI hinge and bornze body ring complete including taking out existing unserviceable valve complete all as specified and directed:-
Non-return (reflux) valve of 150mm dia
Non-return (reflux) valve of 100mm dia
S&F of Butter fly valve valve following bore confirming to IS-5312 Part-I, pressure rating PN1.6, Flange drilling as per IS-1538, CI valve body diaphragm, CI disc, Disc face ring -rubber, Aluminium hinge pin, CI hinge and bornze body ring complete including taking out existing unserviceable valve complete all as specified and directed.
Butter fly valve of 150 mm dia
Butter fly valve of 100 mm dia
S&F for 80mm dia GI tubings (medium grade) with all fittings laid in trenches after taking down old steel tubing and connection complete all as specified and as directed.
S&F for 50mm dia GI tubings (medium grade) with all fittings laid in trenches after taking down old steel tubing and connection complete all as specified and as directed.
S&F for 40mm dia GI tubings (medium grade) with all fittings laid in trenches after taking down old steel tubing and connection complete all as specified and as directed.
S&F for 25mm dia GI tubings (medium grade) with all fittings laid in trenches after taking down old steel tubing and connection complete all as specified and as directed.
S&F for 20mm dia GI tubings (medium grade) with all fittings laid in trenches after taking down old steel tubing and connection complete all as specified and as directed.
S&F for 15mm dia GI tubings (medium grade) with all fittings laid in trenches after taking down old steel tubing and connection complete all as specified and as directed.
S&F for gunmetal gate valves with iron wheel head, screwed both ends for iron pipes after taking down old unserviceable gate valve of following sizes complete all as specified and directed:-
Gate valve of 50mm dia
Gate valve of 40mm dia
Gate valve of 25mm dia
Gate valve of 20mm dia
M&L for pressure gauge of 15 mm bore having pressure range 0-10 Kg per Square centimetre with size 100 mm dia complete all as speicified and directed.
Construction of valve pit chamber with brick masonary with sub class 'B' bricks (one brick thick) in cement mortar (1:6) and necessary 75mm thick PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundation and 15mm thick plastering on brick work in cement mortar (1:4) including necessary earthwork etc work having internal dimension 120cm x 120cm x 90cm and providing of 3mm thick MS sheet cover duly hinged on 40mm x 40mm x 6mm angle iron frame and embedded on top of chamber by minimum 4 Nos MS hold fast. Necessary locking arrangement shall be provided to the sheet cover for safety. The steel surfaces shall be painted with two coats black bituminous paint over a coat of anti corrosive red oxide primer complete after demolition of old valve pit chamber all as specified and directed.
Construction of valve pit chamber with brick masonary with sub class 'B' bricks (one brick thick) in cement mortar (1:6) and necessary 75mm thick PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundation and 15mm thick plastering on brick work in cement mortar (1:4) including necessary earthwork etc work having internal dimension 90cm x 90cm x 90cm and providing of 3mm thick MS sheet cover duly hinged on 40mm x 40mm x 6mm angle iron frame and embedded on top of chamber by minimum 4 Nos MS hold fast. Necessary locking arrangement shall be provided to the sheet cover for safety. The steel surfaces shall be painted with two coats black bituminous paint over a coat of anti corrosive red oxide primer complete after demolition of old valve pit chamber all as specified and directed.
M&L for new generation LED post top lantern, 40 Watts, 230 Volts, AC outdoor type with decorative post top for 360 degree indirect lighting IP-65 protection with impact and corrosion resistant complete with driver and lamp complete with all electrical accessories all as specified complete including taking down old unserviceable light fitting from High mast light light pole of maximum 20 metre height from the normal ground level complete all as specified and directed.
Supply and laying ERW MS pipe, Heavy duty with welded GI flange (For Column pipe, 3 Meter Long, both side MS flange, 100 mm dia, ISI marked with all tube fittings complete with all fittings required for column pipe lowering like suitable size nuts, bolts and heavy duty washers and including cutting pipes, screwing, wash and for making gorged bends on piping complete all as specified and directed.
Supply, fixing and commissioning of Heavy Duty Fully Automatic Star Delta Submersible starter (With short circuit protection) suitable for 30 HP pump set with full load line current 50 Amp, Over load relay range- 30-50 Amps confirms to IS-/IEC-60947-4-1 provided with protection degree IP-54, extended wide band coil, complete internal wiring with inbuilt metering & MCB, suitable for 260-440 Volts, AC, 3 phase including taking down old unserviceable pump starter any type and capacity compete all as specified and directed. (Make- L&T Model No-MUG30FASD or equivalent model/Cat No of make as per Appx 'A' as mentioned in PS here-in-after)
Supply, fixing and commissioning of Heavy Duty Fully Direct On Line with wideband coil uistable for 3 phase, 415 Volts, 50 Hz AC supply of relay range 13-21 Amps complete confirms to IS-/IEC-60947-4-1 provided with protection degree IP-54, extended wide band coil, complete internal wiring with inbuilt metering & MCB, suitable for 260-440 Volts, AC, 3 phase including taking down old UNSN pump starter any type and capacity,compete all as specified and directed. (Make- L&T Model No-SS95983 or equivalent model/Cat No of make as per Appx 'A' as mentioned in PS here-in-after)
M&L for disconnecting the centrifugal pump and motor of 3 to 5 HP capacities after disconnection of mechanical type coupling, suction/discharge pipe line and unbolting from foundation base plate loading/unloading the pump and motor to the vehicle and transportation to workshop for repair/replacement/rewinding with super enamelled copper conductor wires 22 gauge and including dismantle & re-assembling the pump setting the impeller & housing for smooth running, replacement of packing gaskets etc. after repair/replacement/maint transportation back from workshop to site, including re-assembling the same, recoupling the pump with motor on base frame, checking the alignment with motor, testing & commissioning on completion and checking upto the satisfaction of Engr-in-Charge.
M&L for steel wire rope 8 mm galvanised IWRC as per IS-2262/02 alongwith suitable size clamps & 'U' bolts for holding the submersible pumps and motor of capcity uto 35 HP complete all as specified and directed.
M&L for servicing, overhauling of submersible sewage pump of capacity 3HP/ 5 HP after lifting from the sewage well, disconnecting column pipes and electric connection, transporting to workshop of pump for replacement of all defective monor worn out parts and accessories and lowering and re-install the sewage pump to its original position with necessary arrangement for testing and commissioning complete all as specified and directed.
M&L for disconnecting & taking out to Submersible Pump & Motor of Capacity of 25 HP from Pump Houses and Transporting to nearest Workshop for repairing and dismantling the submersible pump 25HP for repair & replace-ment of unserviceable spare-parts including necessary cutting, grinding, drilling, machine work for fixing of spares and re-assembling the Same and Tested in work shop and returning back after repairing and Re-instaltion & lowering in Original Position and Re-connection in water supply installation and Testing complete all as specified and as directed. {Note : (i) Unserviceable spares parts of pump set like bearing, pump shaft, impeller, suction casing, discharge casing, stage casing, rotor assembly, suction stainer, diffuser, stage bowl, sand guard, stud nut & bolts shall be measured and paid separately as "Supply only". (ii) Labour charge for taking out and fixing of "Supply only" materials are deemed to be included with quoted rate }
Supply only following spare parts suitable for 25HP Capacity Submersible Pump as per existing size, make & model and against Item No. 28.00 here-in-before :-
Pump shaft suitable for submersible pump of any type, 6 to 8 stage complete all as specified and directed.
Cast Iron Impeller suitable for submersible pump of any type complete all as specified and directed.
Gun Metal Impeller suitable for submersible pump of any type complete all as specified and directed.
Suction casing suitable for submersible pump of any type complete all as specified and directed.
Discharge casing suitable for submersible pump of any type complete all as specified and directed.
Stage casing suitable for submersible pump of any type complete all as specified and directed.
Carbon thrust bearing with pressure plate suitable for submersible pump any type complete all as specified and directed.
Suction stainer suitable for submersible pump of any type complete all as specified and directed.
Stage bowl suitable for submersible pump of any type complete all as specified and directed.
Sand guard suitable for submersible pump of any type complete all as specified and directed.
Bearing segment carrier suitable for submersible pump any type complete all as specified and directed. (Note for Item No.29.01 to 29.11:- Materials of Item No.29.01 to 29.11 to be incorporated in Item No.28.00 here-in-before)
M&L for disconnecting & taking out to Submersible Pump & Motor of Capacity of 15 HP from Pump Houses and Transporting to nearest Workshop for repairing and dismantling the submersible pump 15HP for repair & replace-ment of unserviceable spare-parts including necessary cutting, grinding, drilling, machine work for fixing of spares and re-assembling the Same and Tested in work shop and returning back after repairing and Re-instaltion & lowering in Original Position and Re-connection in water supply installation and Testing complete all as specified and as directed. {Note : (i) Unserviceable spares parts of pump set like bearing, pump shaft, impeller, suction casing, discharge casing, stage casing, rotor assembly, suction stainer, diffuser, stage bowl, sand guard, stud nut & bolts shall be measured and paid separately as "Supply only". (ii) Labour charge for taking out and fixing of "Supply only" materials are deemed to be included with quoted rate }
Supply only following spare parts suitable for 15HP Capacity Submersible Pump as per existing size, make & model and against Item No. 30.00 :-
Pump shaft suitable for submersible pump of any type, 6 to 8 stage complete all as specified and directed.
Cast Iron Impeller suitable for submersible pump of any type complete all as specified and directed.
Gun Metal Impeller suitable for submersible pump of any type complete all as specified and directed.
Suction casing suitable for submersible pump of any type complete all as specified and directed.
Discharge casing suitable for submersible pump of any type complete all as specified and directed.
Stage casing suitable for submersible pump of any type complete all as specified and directed.
Carbon thrust bearing with pressure plate suitable for submersible pump any type complete all as specified and directed.
Suction stainer suitable for submersible pump of any type complete all as specified and directed.
Stage bowl suitable for submersible pump of any type complete all as specified and directed.
Sand guard suitable for submersible pump of any type complete all as specified and directed.
Bearing segment carrier suitable for submersible pump any type complete all as specified and directed. (Note for Item No.31.01 to 31.11:- Materials of Item No.31.01 to 31.11 to be incorporated in Item No.30.00 here-in-before)
M&L for disconnecting all the electric connections of submersible pump and motor of capacity 7.5 HP and transporting to nearest work shop for repair and dismantling to existing unserviceable submersible motor of capacity 7.5 HP, 3 phase, 440 volts, 50 Hz, 2900 RPM and rewinding to stator with PVC insulated copper winding wire including sleeves, thimbles & including minor spare parts like as bronze bushes , gland packing etc and re-assembling to the same motor after repair work and returning back to the exisiting pump house complete all as specified and directed. (Note- Lifting and lowering of motor and pump from borewell will be measured and paid seperately under relevant items)
All as per item No 32.00 here-in-before but 25 HP capacity submersible motor complete all as specified and directed.
All as per item No 32.00 here-in-before but 15 HP capacity submersible motor complete all as specified and directed.
S&F of single phase preventor with accessories suitable for electric motor 7.5 to 25 HP capacity with necessary electrical connection by using proper size of single core copper conductor cable as in repair complete including taking down/ removing old unserviceable one with necessary electrical connection complete all as specified and directed. (Make: Minilec Cat No-VSP1 AST or equivalent model/Cat No of make as per Appx 'A' as mentioned in PS here-in-after)
Supply and laying PVC insulated and PVC sheathed industrial cable for Submersible pump motors of size 6 Sqmm flat three core copper conductor, 1100 Volts, Confirming to IS-694 complete all as specified and directed.
Lifting of unserviceable Submersible pump and motor (12.5HP to 33 HP) complete set along with submersible cable, SWR from (30 to 40 Mtr) depth by chain pully block and other T&P items complete with disconnecting coloumn pipe of 3 meter length complete all as specified and directed.
Lowering of Submersible pump and motor (12 HP to 33 HP) after connection the complete by fixing of water proof insulation joints and fixing protective clamps SWR and supply and replacing the rubber gasket, nut, washers and bolts all as required including commissioning complete all as specified and directed.
Supply, installation and testing of high pressure single head chemical dosing system having power input 230 Volts, 50 Hz, 40 SPM, 1/30 Fractional Horse power, pressure 7 Kg/Sq Cm, maximum output0-10 Ltr/Hour complete with lead tubing, connecting ferrule, check valve etc with following accessories :- (a) Preparation tank of net capacity 100 Ltrs FRP type of dia 540 mm consisting of water inlet line, outlet line with Y strainer, drain, overflow, pot hole with cover and level gauge complete. (b) Agigator 120 watts 900 RPM single phase flange mounted motor with plastic shaft and impeller. (c) Service tank of net capacity 100 ltrs of FRP dosing tank top dia 540mm and bottom dia 480 mm with height 575 mm consisting of water inlet line, dosing pump inlet arrangement, drain, overflow, level gauge, inspection port with agitator 120 watts 900 RPM single phase, flange mounted motor with plastic shaft and impeller etc including taking out old unserviceable chlorine dosing system alongwith all accessories and removing to MES Store complete all as specified and directed. (Make- AQUAFIT/RAMCO/DECLIBAC/AQUAJIO TECHNOLOGIES )
Supply and replacement of discharge tubing suitable for chlorine chemical dosing system of dia 3/8 inch complete all as specified and directed.
Taking out old unserviceable dosing pump complete with disconnecting all water and electrical connections and removing to MES Store, M & L for diaphram type dosing pump for chlorination system having maximum flwo rate 6 LPH, electrically operated 230 Volts, AC, Single phase, 50 watts, pressure upto 5.5 Kc/Sq Cm having manual and automatic speed control adjustable while running, suction lift upto 1.5 meter water level, electrically operated and mechanically actuated diaphram complete with all standard accessories like foot valve, antisyphan vlave, LDPE tubing etc complete all as specified and directed. (Make- Milton Roy UC11 6LPH/RMCO/Aquafit or equivalent make as per Appx 'A' as mentioned in PS here-in-after)
M&L for testing of water samples for complete Physical, Chemical and Biological Examination of Treated water collected from Pump house Bore well and taken into any state Govt or any NABL approved laboratory for water tesing complete all as specified and directed.
M&L for collection of Treated Sewage water sample (quarterly) from Sewage Treatment Plants of 300/350 KLD capacity from kanchrapara Military Station and carry out following test from Govt Laboratory or any NABL approved laboratory complete all as specified and as directed . (a) B.O.D. (Biochemical Oxygen Demand) (b) C.O.D. (Chemical Oxygen Demand) (c) T.S.S. (d) Residual free chlorine, mg/ltr (e) PH value, Oil and Grease (f) Total Coli from Organisms per 100 M (MPN) (g) T O C (Total Organic Carbon)
Opening the top and side cover of IR plant/pressure filter and oxidation chamber and taking out highly iron content filter media/chemicals and alkathene strainer etc and Cleaning the plant inside and side cover including taking out (unloading) the old catalyst (MnO2), Sand , gravels and strainers fromIron removal plant capacity 10000 GPH and oxidation chamber with proper care completely and cleaning of pipes, Butterfly valve etc, of any capacity/ flow, by opening the manhole cover disconnection and including connection of all incoming and outgoing supply pipe lines of any dia, removing the waste material up to 50 mtr away from site/Pump house and spreading and leveling complete all as specified and directed by Eng-in-charge. ( NOTE- Quoted rate deemed to be included for 01x IRP having 10000 GPH capacity and 01xOxidation plant, complete unloading of old filter media of any type and size and removal of debries from the MES pump house)
M&L for preparing of the complete inside and outside surface of the Iron removal plant of 10000 GPH and Oxidation chamber plant cleaning with iron brush and emery paper. Painting the complete inside face with two coat of black bituminous paint suitable for drinking purpose all as directed and outer surface of iron removal filter plant and Oxidation plant including all frontal pipes etc located at Pump House, applying one coat of synthetic enamel plant (as per existing color) with spray painting machine over a coat of red oxide primer (outside) including arrow marking on inlet and outlet pipe line complete all as specified and directed by Engineer-in-Charge. Note- Quoted rate is deemed to be included for complete cleaning of the IRP and oxidation plant as directed including marking of all pipe line and date of change of Filter media on both plants).
Supply and charging of new life MnO₂ compound (20-25mm size) inside the 10000 GPH capacity Iron removal plant as per site requirement complete all as specified and directed.
Supply, Charging and filling the pressure filter sand (Filter sand assorted size from Barakar.source: Barakar River) inside the 10000 GPH capacity IRP/pressure filter (type of sand 16/30 mesh) complete all as specified and directed.
Supply, charging and filling the pressure filter gravel/filter media inside the 1000 GPH IRP (source: Barakar River) of size upto 6 mm to 40 mm in alternate layers as per site requirements complete all as specified and directed .
S&F of LDPE strainers Alkathene fabricated 5/8" double nut & single washer, of iron removal plant as per site requirement complete all as specified and directed .
S&F of mild steel nuts, bolts with washer as per site requirement including taking down old nuts, bolts etc complete all as specified and directed
Maintenance/repair of air compressor assembly by cleaning the whole body and air tank, oiling, greasing tightening of all nut, bolts if required, minor repairing to compressor pump and electric motor including replacement of spare parts such as 'V' belt, air pressure gauge, ball bearing, gun metal butterfly valve of any size, pully of any type, compressor oil etc required to be replace as per site requirement and complete all as specified and directed .
Dismantling fencing wire mesh, any type complete all as specified and directed.
Demolition of reiforced concrete posts including including taking out embedded portion and making good all as specified and directed.
Excavation in post holes each, not exceeding 0.5 cum, getting out, returning, filling in layers not exceeding 25cm, etc and removal of surplus soil to a distance not exceeding 50m and making good surface in soft/loose soil complete all as specified and directed.
S&F for mild steel works as in posts and struts in fencing including cutting tops to shape as directed drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
S&F for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, 11 to 15mm dia of neck, exc 5cm and not exceeding 10cm long complete all as specified and directed.
M&L for PCC (1:3:6) type C2 (using 40 mm graded stone aggregates) as in foundation, filling and mass concrete complete all as specified and as directed.
M&L for Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde E-165) complete all as specified and directed.
Supply only PVC coated Chain link MS galvanisd fencing, mesh size 100mm and nominal dia 5.0mm complete all as specified and directed. (Note: Fixing charge shall be measured and paid under relevent item here-in-after)
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.
S&F for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, conforming to Fe 410 W (Gde E-250) quality B complete all as specified and directed.
S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed. (Note: Each line of wire to be measured)
M&L for brick work with sub class 'B' bricks locally available best quality straight or curved on plan exceeding 6m mean radius, built in cement mortar (1:6) complete all as specified and directed.
Ditto- all as per Item No.63.00 here-in-before but using old bricks complete all as specified and directed. (Note:Bricks to be obtained from Item No.16.00 & 17.00 here-in-before)
Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and directed.
M&L for 75 mm thick PCC (1:4:8) type D-2 (using 20mm graded stone aggreate) as in subbase to flooring complete all as specified and directed.
M&L for 75 mm thick PCC (1:2:4) type B-2 (using 40mm graded stone aggreate) as in flooring finish surface even and fair complete all as specified and directed.
M/S KARTICK CHANDRA CHAKRABORTY
CHATTERJEE ENTERPRISE
M/S D K Singha
ALOKE ENGINEERING AND COMPANY
R.S. COMPANY
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .