Stage Contract for the day to day Maintenance/Minor Repairs/Renovation/Face Lifting of various Govt. buildings under the jurisdiction of PWD Division Banihal for the Financial Year 2025-26 ( Under Non Plan 3054 ) (2nd Call).

Demolishing concrete manually / by Mechanical means including disposal of Material with in 50 mtr. lead. 1:3:6 or richer mix

1:4:8 0r leaner mix

Demolishing R.C.C work manually / by Mechanical means including stacking of steel bars and disposal of unserviceable Material within 50 mtr. Lead.

Extra for cutting reinforcement bars manually / By Mechanical Means in R.C.C or R.B work (Payment shall be made on the cross sectional area of R.C.C or R.B work).

Extra for scraping, cleaning and straightening reinforcement from R.C.C or R.B work.

Demolishing brick work manually / By Mechanical means incl. stacking of serviceable material and disposal of unserviceable Material with in 50 mtr. Lead (in cement mortar).

Removing mortar from bricks and cleaning bricks incl. stacking with a lead of 50 Mtr. (Stacks of Cleaned bricks shall be measured) from Brick work in cement mortar.

Dismantling doors, windows and clere-story windows (Steel or wood) shutter including chowkhats, architrave, hold fasts etc. Complete and stacking within 50 mtrs. Lead of area of 3 Sqm. and below

of area beyond 3 Sqm.

Taking out doors, window and clerestory windows, shutters (steel or wood) incl. stacking within 50 mtr. Lead of area of 3 Sqm. and below

of area beyond 3 Sqm.

Demolishing brick tile covering in terracing including stacking of serviceable Material and disposal of unserviceable material within 50 mtr. Lead.

Demolishing mud phuska in terracing and disposal of Material within 50 mtr. Lead.

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster incl. disposal of rubbish to the dumping ground with in 50 mtr. Lead.

Repair to plaster of thickness 12mm to 20mm in patches of area 2.5 Sqm. and under including cutting the patch in proper shape raking out joints and preparing the plastering the surface of the wall’s complete including disposal of rubbish to the dumping ground within 50 mtr. Lead. With cement mortar (1:4) 1 cement : 4 fine sand

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Providing and fixing 12 mm thick flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 marked, in ceiling with necessary nails etc. complete (frame work to be paid separately) :

1:4:8 (1 cement : 4 coarse sand : 8 graded crushed stone agg. 40mm nominal size) crushed

1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone agg. 20mm nominal size) crushed

1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone agg. 20mm nominal size) crushed

Brick work with common burnt clay F.P.S (Non-modular) brick of class designation 7.5 in foundation and plinth in (1 cement : 4 coarse sand)

Extra for brick work in Super structure above plinth level upto floor V level (By manual means)

Extra for brick work in square or rectangular pillars.

Half brick masonry with bricks of class designation 7.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand)

Extra for halff brick masonry in superstructure above plinth level upto floor V level

Providing and laying damp-proof course /under floor 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone agg. 20mm nominal size). Crushed

Centering and shuttering including strutting, propping etc and removal of form work for:-oundation, footing, bases of columns.

Suspended floors, roofs, Landing, balconies and access platform.

Shelves (Cost in Situ)

Edges of slab and breaks in floors and walls under 20 mm wide

Providing and laying reinforced cement concrete 1:1.5:3 ( 1 cement :1.5 coarse sand :3 graded crushed stone aggregate 20mm nominal size ) beams, suspended floors, landings balconies & staircases etc. having upto 15° slope excluding cost of centering, shuttering all work upto floor V level

Reinforced cement concrete Works in walls (any thickness) including attached pilasters, buttresses, plinth & string courses, fillets, columns, pillars, piers, abutments, posts and sturts etc. upto floor five level excluding cost of centering, shuttering, finishing & reinforcement.1.1:5:3 ( 1 cement :1.5 coarse sand :2 graded crushed stone aggregate 20mm nominal size )

Providing and laying in position 1:1.5:3grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level

Reinforcement for R.C.C work incuding straightening cutting, bending, placing in position and binding all complete, Thermo - Mechanically treated bars of specified grade) (TMT)

Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structutral steel etc. as requierd. In gratings, frames, guard bar ladders railing, brackets, gates & similar work.

Structural steel work in built up welded sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Regrading, terracing of mud phaska covered with tiles or bricks, in cement by dismantling tiles or bricks, removing mud plaster preparing the surface of mud phaska to proper slope relaying plaster gobri leaping and tiles or bricks grouted in cement mortar 1:3 (1 cement : 3 fine sand) including replacing unservicable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded) with in 50 mtr. Lead .

Raking out joints in lime or cement and preparing the surface for repainting or replastering including disposal of rubbish to the dumping ground within 50 mtr. Lead.

White washing with lime to give an shades Old work (Two or more coats)

Old work ( One or more coats)

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth incl. necessary repairs to scratches etc complete.

Renewing glass panes, with putty and nails wherever necessary including raking out old putty : Float glass panes of thickness 4.0 mm(weight not less than 10kg/sqm)

Removing dry or oil bound distemper, water proofing cement paint and the like by scraping and sand papering and preparing the surface smooth including necessary repairs to scratches etc complete.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade.(one or more coats) on old work.

Painting with Synthetic enamel paint of approved brand incl. manufacture of required Colour to give an even shade (One or more coats on old work)

15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement : 6 coarse sand)

1:4 (1 cement : 4 coarse sand)

12 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement : 6 coarse sand)

1:4 (1 cement : 4 coarse sand)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. New work (two or more coats) over and including priming coat with cement primer.

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface water thinable cement primer.

Finishing wall with acrylic smooth exterior paint of required shade on new work (Two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing cement paint applied @ 2.2 kg/10 sqm.

Finishing walls with water proofing cement paint of required shade New work (Two or more coats) applied @ 3.84 Kg/10Sqm

Old work (One or more coats) applied @ 2.20 Kg/10Sqm over priming coat of primer applied @ 0.80 ltrs./10 Sqm complete including cost of priming coat.

Float glass panes of thickness 5.0 mm(weight not less than 12.5 kg/sqm)

With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel work

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade.New Steel work (Two or move coats)

Distempering with 1st quality Acrylic/oil bound washable distemper (ready-made) having VOC content less than 50 grams/litre of approved manufacturer and of required shade and colour complete as per manufacturers’ specifications, one or more coats on old work

Painting (one or more coats ) on rain water, soil , waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture on old work :75 mm diameter pipes

100 mm diameter pipes

150 mm diameter pipes

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on oldwork

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on old work.

Providing and applying white cement based putty of average thickness 1mm of approvded brand and manufacture over the plastered wall surfaces to prepare the surafce even and smooth complete.

Providing and applying white cement based putty of average thickness 2mm of approved brand and manufacture over the plastered wall surfaces to prepare the surafce even and smooth complete.

Providing and fixing double scaffolding system (cup lock type) on the exterior side upto seven storey height made with 40 mm dia M.S tube 1.5 m centre to centre horizontal & vertical tubes joining with cup & lock system with M.S tubes, M.S tube challies, M.S clamps and M.S staircase system in the scaffoldings for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding ststem shall be stiffened with bracings, runner, connection with the building etc. wherever required for inspection of work at required locations with essential safty features for the workmen etc complete as per directions and approval of Engineer-in-charge.The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. (To be used for maintenance work judicially necessary deduction for scaffolding in the existing item to be done.

1620 (20 mm OD) pipe

2025 (25 mm OD) pipe

Providing and fixing Polyethelene-Aluminium Polythelene (PE-AL-PE) Composite presure pipes conforming to IS:15450 U.V stabilised with carbon black having thermal stability for hot and cold water supply , capable to with stand temperature upto 80 c including all special fittings of composite material (Engineering plastic blend and brase inserts wherever required) e.g Elbow

1620 (20 mm OD) pipe

2025 (25 mm OD) pipe

Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

20 mm dia nominal bore (Medium)

25 mm dia nominal bore (Medium)

32 mm dia nominal bore (Medium)

Painting on G.S sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution.

20 mm dia nominal bore (Medium)

25 mm dia nominal bore (Medium)

32 mm dia nominal bore (Medium)

40 mm dia nominal bore (Medium)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Internal work-Exposed on wall 15 mm dia. nominal bore

20 mm nominal bore

25 mm nominal bore

32 mm nominal bore

40 mm nominal bore

20 mm nominal bore

25 mm nominal bore

32 mm nominal bore

40 mm nominal bore

s, tees, reducers, couplers and connectors etc with clamps at one meter spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the Engineer-in-charge (concealed work including cutting chases and making good the wall etc).1216 (16mm OD) pipe

Cutting holes in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete upto 15x15 cm

Providing and fixing PVC floor trap of Finolex / Supreme make.

Providing and fixing water closet squtting pan Indian type (Orrisa pattern) white vitreous china w.c pan of size 580x440 mm with integral type foot rests (Hindware / Cera/Parryware make) with 100 mm PVC P&S Trap including cutting and making good the walls and floors wherever required.

Providing and fixing white vitreous china pedestals type water closet (Hindware/Cera/Parryware make) (European type w.c pan) with 100 mm PVC P&S trap including cutting and making good the walls and floors wherever required.

Providing and fixing PVC moulded fittings/accessories for PVC pipes including jointing with seal ring complete (Finolex / Supreme make)75mm dia Plain bend

Size 630x450 mm

Providing and fixing white vitreous china pedestal for wash Basin completely recessed at the back for the reception of pipes and fittings. (Hindware / Cera/Parryware make)

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340 x 410 x 265mm size respectively. (Hindware / Cera/Parryware make)

Providing and PVC low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231 with all fittings and fixtures complete. (Hindware / Cera / parry ware make). (10 lts. Capacity) white.

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work)15 mm nominal bore

Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work. .15 mm nominal bore

Providing and fixing white solid plastic seat with lid for pedestal type w.c pan complete (Hindware / Cera / Parry ware make).

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required (Hindware/Cera/Parryware make)Size 550 x 400mm

Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per I.S:13983 with C.I brackets and stainless steel plug 40mm including painting of fittings and brackets cutting and making good the walls wherever required:-610x460mm bowl depth 200mm

470x420 mm bowl depth 178mm

Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete Flexible pipe 32 mm dia

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: Semi rigid pipe 32 mm dia

40 mm dia

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.

Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour 25 mm nominal bore, weighing not less than 62gms

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms.

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms.

600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour: Waste coupling 31mm of 79 mm length and 62 mm breadth weighing not less than 45gms.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid ISI license]

Construction brick masonary manhole in cement mortar 1:4 (1 cement : 4 coarse sand) R.C.C top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size ) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design. Inside size 90x80cm and 45cm deep including angle Iron frame 50x50x6mm and precast RCC slab cover with 40x40x5mm frame (2'-0" x 2'-0") with F.P.S bricks with class designation 75 & with crushed stone aggregate.

Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931

Providing and fixing 18mm stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep, fixed in urinal partitions by White Agaria Marble Stone/Granite stone of approved shade by cutting a chase of appropriate width withchase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-Charge and finished smooth.

Powder coated aluminium (minimum thickness of powder coated 50 microns)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z-section and other sections of approved make conforming to IS 733 and IS 1285, fixed with dash fastener of required dia and size incl. necessary filling upto gaps at junctions i.e at top, bottom and sides with required EPDM rubber/ neoprane gasket felt etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required incl. cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless steel screws, all complete as per architectural drawing and the directions of Engineer-in-charge (glazing ,panelling and dash fasterner to be paid for reparately). For fixed portion For shutters of doors, windows & ventilators incl. providing and fixing hinges /pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprane gasket required (fittings shall be paid for separately). Anodised aluminium (anodised transparent or dyed to required shade according to IS 1868 minimum anodic coating of grade AC 15).

Powder coated aluminium (minium thickness of powder coated 50)

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (confirming to IS 12823 grade I type II) in panelling fixed in aluminium doors, windows shutters and partition frames with C.P brass / stainless steel screws etc complete as per architectural drawing and directions of Engineer-in-charge. Pre laminated particle board with decorative lamination on both sides.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z-section and other sections of approved make conforming to IS 733 and IS 1285, fixed with dash fastener of required dia and size incl. necessary filling upto gaps at junctions i.e at top, bottom and sides with required EPDM rubber/ neoprane gasket felt etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required incl. cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless steel screws, all complete as per architectural drawing and the directions of Engineer-in-charge (glazing ,panelling and dash fasterner to be paid for reparately). For fixed portion Anodised alumnium (anodised transparent or dyed to required shade according to IS:1868 minimum anodic coating of grade AC 15).

Providing and fixing double action hydraulic floor fixing of approved brand and manufacture IS : 6315 marked, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg for door, incl. cost of cutting floors embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece MS sheet outer box with slide plate etc complete as per the direction of Engineer-in-charge with stainless steel cover plate minimum 1.25 mm thickness.

Providing and fixing glazing in aluminium door, windows, ventilator shutter and partitions etc with EPDM rubber / neoprene gasket etc complete as per the architectural drawing and directions of Engineer-in-charge (Cost of aluminium snap beading shall be paid in basic items with floating glass panes of 5.00 mm thickness (weight not less then 13.50 kg/Sqm.) (Saint Gobin/Modi Guard)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering grade. All work upto linth level. 1:5:10 (1 cement : 5 coarse sand : 10 graded crushed stone agg. 40mm nominal size) crushed

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc complete. 200 x 10 mm

Providing and fixing Brass 100mm mortice latch and lock with 6levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Providing and fixing in position collapsible steel shutters with vertical channels 20x 10x2 mm and braced with flat iron diagonals 20 x5 mm size with top and bottom rail of T- iron 40x40x6mm with 40 mm dia, steel pulleys complete with bolts, nuts, locking arrangment, stoppers, handles, including applying a priming coat of approved steel primer.

Providing and fixing alumnium handles ISI marked anodised (anodic coating not less than grade AC as per IS:1868) transparent or dyed to required colour and shade with necessary screws etc complete. 125mm

Second class Deodar wood : 35mm thick

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm

Providing and fixing 35mm thick wire gauge shutters using Galvanised M.S wire gauge of average width for aperture 1.4mm in both directions with wire of dia 0.63 mm for doors, windows and clear story windows with hinges and necessary screw & including ISI marked bright M.S bright finished M.S Butt hinges with neceaasry screw of required size. Second Class Deodar wood.

Providing & fixing panelled or panelled & glazed shutters for Doors and windows & clerestoy windows incl. ISI marked M.S pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid separately, all complete as per direction of Engineer-in-charge. Second class Deodar wood : 30mm thick

Extra for depth for manholes Size 90x80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

20mm dia

Providing and fixing wooden moulded beading to doors & windows frames with iron screws, plugs & priming coat on unexposed surface etc complete. 2nd class Teak wood 50x12mm

Providing and fixing polythelene Aluminium polythelene (PE-AL-PE) composite pressure pipes conforming to IS : 15450-U.V stabilised with carbon black having thermal for hot and cold water supply, capable to with stand temperature upto 80 c including all special fittings of composite material (Engineering plastic blend and brase inserts wherever required) e.g Elbows, tees, reducers, couplers and connectors etc with clamps at one meter spacing. This includes testing of joints complete as per direction of the Engineer-in-charge.Internal work-Exposed on wall 1216 (16mm OD) pipe

50 mm thick with 20 mm nominal size stone agg (Crushed)

Providing and fixing tiles false ceiling of approved material of 595x595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanised @ 120 Sqm. both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200mm center to center and cross "T" of size 24x25mm made of 0.30 thick sheet 1200mm lay spaced between man "T" at 600mm center to center to form a grid of 1200x600mm and secondary cross "T" of length 600mm size 24x25mm made of 0.30 mm thick sheet to be interlocked at middle of 1200 x 600mm panel to form grids of 600x600 and wall angle of size 24x24x0.30mm laying false ceiling tiles of approved texture in the grid. including, wherever required cutting/making, opening for services like diffusers, grills, light fittings, fixtures smoke detectors etc Main "T" runners to be suspsnded form ceiling using G.I slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mtr. long dash fasterners 4mm G.I adjustable rods with galvanised butterfuly level clips of size 85x30x0.8mm spaced at 1200mm center to center along main T, bottom GI Metal ceiling lay in perforated Tegular edge globawhite color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop made of GI sheet having galvanizing of 100 gm/sqm (both sides inclusive) and 20% perforationarea with 1.8 mm dia holes and having NCR (Noice Reduction Coefficient) of 0.5 electro statically polyesterpowder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.

Size of tile 600x600 mm

Size of tile 800x800 mm

Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS:15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately)..Make Khajaria/Rak. Size of tile 500x500 mm

Size of tile 600x600 mm

Size of tile 800x800 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. Size of tile 500x500 mm

Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm ( average) thick cement mortar 1:3 (1 cement:3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing, polishing and curing complete.

Providing and laying vitrified floor tiles of size 600 x600 mm in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete

Disposal of unserviceable dismentled material/waste mulba by Mechanical transportation outside Municipal limits incl. cost of loading, unloading, stacking complete (Trolly)

Grinding and polishing old terrazo flooring/Skirting with floor polish of specified brand for smooth finishing including disposal of waste material of grinding/ polishing from site of work to dumping site at ground floor.

Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment tomatch the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) :

18mm thick

Extra for providing edge moulding to 18mm thick marble stone counters, Vanities etc including machine polishing to edge to give high gloss finish etc complete as per design approved by Engineer-in-charge. Granite work

Extra for providing frosted Glass Panes 10 Kg /Sqm. (4mm Thick) instead of ordinary float Glass Panes 10 Kg/Sqm. in Doors, Windows and clerestory window shutters (Area of opening for Glass Panes excluding Portion inside rebate shall be measured).

Providing and fixing M.S Wire gauze to old wood shutters/steel shutters including removing and fitting of shutters complete

Providing and fixing M.S Grills of required pattern in frames of windows etc with M.S Flats square or round bars etc incl. priming coat with approved steel primer all complete.Fixed to steel windows by welding

Fixed to openings / wooden frames

Providing and fixing alumnium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with nuts and screws etc complete 300 x 16mm

Providing and fixing brass bib cock of approved quality. 15 mm nominal bore

Good Earth avg. for an avg. Distance of 15 km

TOTAL AMOUNT in Rs. P

Providing and fixing gang saw cut mirror polished (pre moalded and pre polished) machine cut for granite of any color or shade Area of slab over 0.5 sqm in kitchen, platform, vanity counters, window sills facias and similar locations of required size of approved shade colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement matching pigment, epoxy touch ups including rubbing moulding and polishing to edge to give high gloss finisg etc complete at all levels. 16mm thick

Carriage of Sand, Aggregate upto 40mm for an avg. Distance of 105 km

Providing and fixing double glazed hermetically sealed glazing in aluminum windows, ventilators and partition etc. with 6mm thick clear float glass both side having 12mm air gap including providing EPDM gasket, perforated aluminum spacers, desiccants, silicon sealant (both primary and secondary sealant) etc. as per specifications, drawings and directions of Engineer-in-charge complete. sqm 3852.20

Providing and fixing PVC Panelling in walls 8 to 10 mm thick including all fittings and fixtures complete ( Wall Affair or any equivalent make)

Steel work in built up tubular round, square or rectangular including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer including welding and bolting with special shaped washers etc.complete. Hot finished welded type tubes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (Internal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing) having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.15mm nominal outer dia pipes.

20 mm nominal outer dia pipes.

25 mm nominal outer dia pipes.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.) having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.15mm nominal outer dia pipes.

20 mm nominal outer dia pipes.

25 mm nominal outer dia pipes.

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement incl. cement slurry but excluding the cost of nosing of steps etc complete. 40 mm thick with 20 mm nominal size stone agg (Crushed)

20 mm nominal bore

25 mm nominal bore

Providing and fixing 6 mm water proof ply complete job

Providing and fixing 12 mm water proof ply complete job

Providing and fixing 19 mm water proof ply complete job

Carriage of material by M.T including loading , unloading complete Sand, Aggregate upto 40mm for an avg. Distance of 25 km

32 mm nominal bore

40 mm nominal bore

50 mm nominal bore

65mm nominal bore

80 mm nominal bore

Providing corrugated G. S. sheet 0.63 mm thick with zinc coating not less than 275 gram/m2 in roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch inhorizontal/vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Extra for straight cutting in C.G.S. sheet 0f 0.63 mm thick in roofing for making opening of area exceeding 40sq.decimetre for chimney stacks, sky light etc.

Providing and fixing lSI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hardwood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces ofshutters.35 mm thick including lSI marked M.S. pressed bright finished butt hinges with necessary screws of required size

Providing and fixing lSI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including lSI marked M.S. pressed bright finished butt hinges with necessary screws of required size.

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot &double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge.(Door handle, lock and stopper etc.to be paid separately).

Bricks avg.for an avg. Distance of 120km

Providing & fixing panelling or panelling & glazing in panelled or panelled and glazed shutters for doors, windows & clerestory windows (Area of opening for panel insert excluding portion inside Grooves or rebates to be measured) panelling for panelled or panelled & Glazed shutters 25mm to 40mm particle board 12mm thick, Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked

Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) Light shade using white cement

Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 12 mm dia.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Providing and fixing ply wood 4mm thick one side decorative veneer conforming to IS: 1328(type 1), for plain lining/cladding with necessary screws, including priming coat on unexposed surface with. Decorative veneer facings of approved manufactures

WOODEN FLOORING Wooden planking, tongued and grooved in flooring including fixing withiron screws complete: Second class teak wood

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil

Providing and fixing

chromium plated brass 100 mm mortice latch and lockwith 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing ball bearing for rolling shutters

Providing and fixing aluminum tee channels (heavy duty) with rollers, stop end in pelmets as curtain rods.

6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)

Providing and fixing PVC rigid foam sheet 1mm thick on existing door shutters(bathroom and W.C. doors) using synthetic rubber based adhesive

Distempering with 1st quality Acrylic/oil bound washable distemper (ready-made) having VOC content less than 50 grams/litre of approved manufacturer and of required shade and colour complete as per manufacturers’ specifications, one or more coats on old work

Supplying and fixing rolling shutters of approved make, made of requiredsize M.S. laths, interlocked together through their entire length and jointedtogether at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover

Providing corrugated G. S. sheet roofing including vertical/curved surfacefixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 0.63 mm thick with zinc coating not less than 275 gram/m2

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

French spirit polishing, Two or more coats on new works including a coat of wood filler old work

Re-fixing old glass panes with putty and nails

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade on old work (one or more coats)

Finishing walls with water proofing cement paint of required shade Old work (one or more coats applied @ 2.20 kg/10sqm) complete

Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm

Cleaning of under ground sump, Over Head R.C.C. Tank (independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- (i)Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits.(ii) Entire surface area of the sump shall then scrubbed thoroughly withwire brush etc. and pressure washed with water (iii) Chlorination of RCC internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface.(v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.

Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in- charge.

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore

20 mm nominal bore

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement incl. cement slurry but excluding the cost of nosing of steps etc complete. 40 mm thick with 20 mm nominal size stone agg (Crushed)

20mm nominal bore

25 mm nominal bore

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.For thickness of tiles 10 mm to 25 mm

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing Aluminium composite panel sheet for doors 1mm thick