CONSTRUCTION OF FIELD PATH AT RD 11165 AND RECONSTRUCTION OF VRB RD 12220 OF NEELON DRAIN

Amount

Excavation in Soil (any type) using hydraulic excavator CK 90 Excavation with hydraulic excavator of 0.90cum bucket capacity including cutting and loading in tippers trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, including all lifts and combined lead upto 30m

Plain cement concrete M-10 (1:3:6) nominal mix in foundation with crushed stone aggregate 40mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.

Reinforced Cement Concrete M-25 with Batching Plant, Transit Mixer and Concrete Pump in Open Foundation complete as per Drawing and Technical Specifications

Reinforced Cement Concrete M-25 with Batching Plant, Transit Mixer and Concrete Pump in sub-structure complete as per Drawing and Technical Specifications (height upto 5m)

Plain cement concrete M-15 in Open Foundation complete as per Drawing and Technical Specifications.

Furnishing and Placing Reinforced cement concrete RCC Grade M30 using Batching Plant, Transit Mixer and Concrete Pump as per drawing and Technical Specifications for Solid slab super structure including centering and shuttering (height upto 5m)

Furnishing and Placing Reinforced cement concrete RCC Grade M40 using Batching Plant, Transit Mixer and Concrete Pump as per drawing and Technical Specifications for Solid slab super structure including centering and shuttering (height upto 5m)

Cold twisted deformed (Ribbed/Tor Steel Bar) Bars Fe500 grade as per IS 1786-1985, for R.C.C. works, where not including in the complete rate of R.C.C. including bending and placing in position complete in all respect.

Making bore and installation of pumping set for dewatering arrangements complete in all respect.

Providing, Running and maintenance of pumping set 8 H.P./Generator Set for dewatering arrangements complete in all respect.

Back filling with Sandy material behind abutment, wing wall and return wall complete as per drawing and Technical Specifications.

Providing GI Plate of any size and desired shape complete in all respect as per approved drawing and to entire satisfaction of engineer incharge

Fillet welding with high strength steel rods complete in all respect and to entire satifaction of engineer in charge

Providing and fixing Stainless steel nut and bolts of all sizes & length required

20mm thick cement plaster 1:2 in two coat work

Drilling/boring hole of any size including rimming complete in all respects and to entire satisfaction of engineer-in-charge

Suppling and laying of GI Pipe Hollow/Pipe of any size

Providing and laying Tar Felt Paper for Joint

Providing weep holes in Reinforced concrete abutment, wing wall/return wall with 100 mm dia PVC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing face. Complete as per drawing and Technical Specifications.

Drainage Spouts complete as per drawing no. SD/205 and Technical Specification with 0.6 meter long GI 100 mm dia drainage GI light grade pipe (For Bridges).

Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 sqm.

VARSHA CONSTRUCTION CO