Augmentation of LWSS Dadahu in GP Dadahu Tehsil Dadahu Distt. Sirmour HP

Amount

Excavation in drains and channels etc.in earth work in all kinds of soil such as Kankar Moorum,Shingles, Conglomerate saturated soil decomposed or soft rock &hard rock by blasting including dressing of sides and beds,disposing of excavated earth with all leads, lifts disposed earth to be levelled and neatly dressed and thenreturning the stacked soil into foundation and trenches etc. including ramming and consolidating the same whereever required with all leads, lifts and including jungle clearance and as per the direction of the Engineer Incharge.

Providing and layinng cemment concrete 1:6:12 (1 cement:6app sand:12app graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth in all height and depth including all leads, and carrige of material at site and as directed by the Engineer Incharge .

Squared rubble masonary coursed with hard stone of approved quility of foundation and plinth including racking out joints in cement morter 1:6(1cement:2app sand) including all leads lifts and carrige of material at site and as directed by the Engineer Incharge .

Providing and laying 38mm thick cement concrete 1:2:4(1cement :2app sand:4app graded stone agg.12.5mm nominal size and curing complete .I/c all laeds ,lifts and carrige of material at site and as directed by the Engineer Incharge.

Applying coat of hot bitumen (mexphalt 80/100 or equipment using 1.70Kg per square mtrs on damp proof , course after cleaning the surface with a cloth lightly socked in kerosin oil, including all leads , lifts and carige of material at site and as directed by the Engineer Incharge.

Brick using common burnt clay building bricks ( 11 class) including racking out joints in cement morter 1:4(1cement:4app sand)extra for super structure above plinth level and upto floor two level including all leads lifts and carrige of material at site and as directed by the Engineer Incharge .

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30X30X5mm . So as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for insitu-reinforced concrete and plain concrete work in, including all leads, lifts for insitu-reinforced concrete and plain concrete work in, including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Flat surface such as soffits of suspended floors, roofs,landings and the like floors etc.in all thickness.

Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttresses,plinth and string sources and the like.

Edge of slabes

Providing and laying reinforced cement concrete work 1:2:4(1cement:2app.sand:4app.graded stone aggregate 20 mm nominal size) nominal size and curing complete excluding cost of form work and reinforcement for RCC work in suspended floors roofs, landings shelves and their supports balconies beams,girders bressumers and cantilevers upto floor two level in all height and depth, including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Providing and laying cement concrete 1:2 :4(1cement:2app.sand:4app.graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforced for reinfoece concrete work in wall(any thickness not less than 0.1m thickness) attahced pillaster buttresses, plinth and string courses etc. from top of foundation level upto floor two level,including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge..

Providing tor steel reinforcement for RCC work including banding, binding and placing in polsition complete upto floor two lelvel including all leads, and carriage of material at site and as directed by the Engineer Incharge.including cost of binding wires.

20mm cement plaster in single coat on rough side of brick stone masonary for interier plastering upto floors two level including arrisis ,internal rounded angle ,chamfers and rounded angles not exceeding 80mm in girth and finished even and smooth in cement morter 1:6(1cement:6app sand) including all leads , lifts and carrige of material at site and as directed by the Engineer Incharge.

6mm cement plaster to ceiling in cement morter 1:3( 1cement:3app sand) including all leads ,lifts and carrige of material at site and as directed by the Engineer Incharge.

Providing and fixing pressed steel door frames conforming to manufactured from commercial mild steel sheet of 1.25 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.25 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc.complete as per architectural drawings and directions of engineer- in-charge.

Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side

Supplying and fixing rolling shutters of approved make made of 80 mm x 1.25 mm M.S. laths interlocked together through their entire length and joined together at the end by end locks mounted on specially designed pipe shaft, with brackets side guides and arrangements for inside and outside locking with push pull operation complete but excluding the cost of the top cover and spring.

i)Shutters having width below 3.5 metres.

ii)Providing and fixing 27.5 centimetre long wire spring grade No. 2 for rolling shutters.

3) Providing and fixing top cover for rolling shutter

4)Providing and fixing ball bearing for rolling shutter

Applying priming coats over new metal and metal based surfece after and including preparing the surface by thoroughly cleaning oil , grease, dirt and other forign matter sand papering and knotting ready mixed paint brusing wood primar pink, including all leads ,lifts and carrige of material at site and as directed by the Engineer Incharge.

Painting two coats (excluding priming coat) on new metal based surfece with enamal paint to give an even shade including cleaning the surface of all dirt dust and other foreiign matter , sand papering and stoping with paint other then white , leads ,lifts and carrige of material at site and as directed by the Engineer Incharge.

White washing with lime on undecorated wall surface (two coat) to give an even shade including thourghly brooming the surface to remove all dirt ,dust morter dirts and other foreign matter including all leads , lifts and carrige of material at site and as directed by the Engineer Incharge.

Cement concrete flooring 1:2:4(1cement :2app sand:4app graded stone aggregate 20mm nominal size ) laid in one layer finished with a floating coat of neat cement 40mm thick including all leads,lifts and carrige of material at site and as directed by the Engineer Incharge.

Terrazzo tile flooring with precast terrazzo tiles 20 mm thick with marble chips of specified size laid in floors,treads of steps and landing on a bed of 25 mm average thickness of cemenrt mortar 1 :6 ( 1 cement,6 sand ) jointed with neat cement slurry mixed with pigment to match the shade of tile where ever required including rubbing and polishing complete with tiles of following shades medium with in all leads and lifts complete in all respect.

Providing and fixing M.S round or square bars at required spacing in wooden frames of wooden and clearstory window ,including all leads , lifts and carrige of material at site and as directed by the Engineer Incharge.

Providing and fixing M.S tower bolts (barel type) with necssary screw etc. complete 200x10mm including all leads , lifts and carrige of material at site and as directed by the Engineer Incharge

Providing and fixing M.S sliding door bolts with nut and screw etc. complete 250x16mm including all leads , lifts and carrige of material at site and as directed by the Engineer Incharge

Providing and fixing M.S. handles with necessary screws etc. complete including all leads , lifts and carrige of material at site and as directed by the Engineer Incharge.125mm

Providing and fixing M.S hooks and eyes 100mm including all leads , lifts and carrige of material at site and as directed by the Engineer Incharge.

Supplying and fixing cast iron cover with frames for main holes of size 500mm intenal dia metre C.I. Cover (Medium) duty the weight of cover to be not less than 58Kg I/c all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Providing under layer for plinth protectatin of 75mm thich (Un consolidated) bed of dry brick stone 40mm nominal size well rammed and consolidating and grouted with fine sand including preparation of ground including all leads , lifts and carrige of material at site and as directed by the Engineer Incharge.

Providing plinth protection 50mm in cement concrete 1:3:6(1cement :3app sand:6app graded sotne agg. 20mm nominal size) including finishing the top surfece of concrete smooth including all leads , lifts and carrige of material at site and as directed by the Engineer Incharge.

C/O random rubble masonary open surface drain 150mm width with hard stone of approved quility in cement morter 1:6(1cement:6app sand) including earth work 100mm bed concrete 1:5:10 (1cement:5ap sand :10app graded stone agg. 40mm nominal size) and curing complete zand 25mm cement plaster 1:3(1cement :3app sand) including all leads , lifts and carrige of material at site and as directed by the Engineer Incharge.

Providing and fixing M.S. fan clamp type -I 16 mm dia light etc. complete including all leads , lifts and carrige of material at site and as directed by the Engineer Incharge.

Providing and fixing PVC Pipe 80 mm dia from P or s trap to septic tank & vent. in septic tank including all leads ,lifts and carrige of material at as directed by the Engineer Incharge.

Providing and fixing P or S Trap including all leads ,lifts and carrige of material at site and as directed by the Engineer Incharge.

Providing and fixing toilet sheet with CP Brass hings (white) including all leads ,lifts and carrige of material at site and asdirected by the Engineer Incharge.

Providing and fixing vent pipes & fittings single socked pipe 50 mm dia (1.83 mtr. Long) including all leads ,lifts and carrige of material at site and asdirected by the Engineer Incharge.

Chaman Lal Contractor

[email protected]

Deepak Kumar Contractor

Jawant Singh

OM PARKASH SHARMA