Karnataka

Active

Works

Bridge cum Barrages

Construction of a Bridge Cum Barrage across the Malaprabha River at Chikkahattiholi village, Khanapur taluk, Belagavi District along with allied works including Sopanam, Left Bank Protection and Connecting Roads from Chikkahattiholi and Karvinkoppa villages together with Operation and Maintenance for a period of 5 years

Karnataka Neeravari Nigam Limited

KNNL Division Kalasa Project Div Khanapur | Khanapur, Karnataka

Amount: ₹41.4 CrCloses: 19 Jun 2026

Tender Value

₹41.4 Cr

EMD Value

₹41.4 L

Closing Date

19 Jun 2026, 9:30 pm

Tender Inviting Organisation

Name

Karnataka Neeravari Nigam Limited

Work Description

Construction of a Bridge Cum Barrage across the Malaprabha River at Chikkahattiholi village, Khanapur taluk, Belagavi District along with allied works including Sopanam, Left Bank Protection and Connecting Roads from Chikkahattiholi and Karvinkoppa villages together with Operation and Maintenance for a period of 5 years

Tender Information

Tender ID

301428

Reference Number

KNNL/2025-26/BB/WORK_INDENT3888/CALL-2

Tender Type

Open

Product Category

Bridge cum Barrages

Location

KNNL Division Kalasa Project Div Khanapur

Source Website

Subscribe to view

Documents Required

7 documents required · 7 mandatory

Technical Bid

RequiredCopy of registration certificate in Class-I & above KPWD / CPWD with validity.

RequiredThe requisite Earnest Money Deposit EMD

RequiredEPF Registration certificate copy.

RequiredEPF Challan Previous month

RequiredCopy of Income tax return filed for the financial year 2024-25.

RequiredGST Registration Certificate.

RequiredEach of the documents uploaded should be self-attested by the contractor or authorized representative in case of firm/company.

Eligibility Criteria

Joint venture is not acceptable.

The intending bidders are advised to visit the site of work, before submitting their tender

The contractor who intends to get pre-qualified for taking up the above work under KNNL should submit through e-portal the details mentioned below along with requisition for blank tender documents. The blank tender documents will be made open to those contractors who meet the pre-qualification criteria for taking up the aforesaid work. The information furnished by the contractor meeting with the prequalification conditions SHOULD BE supported with relevant documents. EACH OF THE SAID DOCUMENT SHOULD BE DULY SIGNED BY THE contractor as a token of genuinely and truthfulness of the documents without self-attested signature of the contractor will not be considered for prequalification.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Each of the documents uploaded to the e-portal should be self-attested by the contractor or an authorized representative in case of firm /company.

Self-attested copies of the documents of all details uploaded to the e-portal for pre-qualification along with the EMD in original should be submitted to the Executive Engineer on or before the date & time specified below in the present notification

The contractor should furnish the name of the individual /firm with address and telephone No with place of registration, year of incorporation etc.

The application made by the firm/company, shall be signed by a person holding the power of attorney, in which case a copy of power of attorney shall be submitted.

The Bidder should also furnish the list of work on hand with all details. Such as bid cost date of entrustment, stipulated date of completion, actual date of completion, completed cost of work etc.,

Bidders for the work who have already executed the work and / or who are executing the works under Karnataka Neeravari Nigam Limited should enclose performance certificates from the concerned Executive Engineer for having satisfactorily executed / or satisfactorily executing the works undertaken by them under Karnataka Neeravari Nigam Limited. Such tenders received without performance certificates or with unsatisfactory performance are liable for rejection

The bidder at the time of submission of the tender should give a detailed execution plan and fortnightly program to complete the work in full manner in 6 months without fail. The program can be modified with mutual consent.

The work will be constantly monitored by the Executive engineer and if there is any slippage in achieving the program/ milestones month wise, a penalty / liquidated damages as indicated in the agreement / tender document would be levied. However, these liquidated damages will be refunded if the contractor makes the good the shortfall in the subsequent months or completes the whole work before the stipulated date of completion.

Defect liability period will be 12 months from the date of satisfactory completion of work and after 1st filling and obtaining necessary clearances from competent authority.

The contactor / authorized signatory should attach his/her scanned signature to the schedule-B before uploading the documents

Conditional tenders will be rejected. The officer competent to accept tender shall have the right to reject any or all the tender without assigning any reason whatsoever

The intending bidder should note that, if any of the lands either in part / parts or in whole required for the work is not acquired by the Nigam, it shall be responsibility of the bidder to take possession of such lands and start the work by consent of the land owners before commencement of the work at no extra cost to the Nigam and no claims/ delays whatsoever relating to non-availability of land would be entertained

If the percentage quoted by the contractor for the work is below ninety percent of estimated amount put to tender or recast amount put to tender of the department, then the contractor shall furnish an additional performance security in the form of Bank Guarantee for an amount equivalent to the difference between the cost as per quoted percentage and 90% of the estimated amount put to tender or recast amount put to tender. In case of contractor quotation rates above 125% of the estimated rates then the amount over and above 125% will be withheld during the progress of work. The additional performance security will be released proportionately to the bill amount till the contractor achieves progress of the entire cost of the work as per agreement.

Photo Copies of the work under taken in the stages of before execution Work under progress, and Completion of the work should be produced at the time of submitting the bill by the Contractor on his own cost

Materials like steel, cement, blasting material etc., required for the work shall be procured by the tenderer themselves and should get tested by the quality control authority before use on the work at their own cost

If KNNL wishes to engage Third party consultant for Quality control assessment, apart from the KNNL quality control and field tests, the contractor should cooperate with both quality control authorities and third party.

All the items in the tender include all lead, lifts, loading unloading, transportation, dewatering and desilting labour, hire charges of machinery curing for concrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer in charge of this work.

Successful bidders should execute the agreement within 20 days from the date of approval intimated. An additional time of 30 days may be allowed with a penalty of 0.5% of Contract value. If the contractor fails to enter into the agreement within the said period, the EMD of the contractor shall be forfeited and action shall be initiated for banning to participate in the tender of KNNL.

Any documents submitted through post / courier is at the risk of contractor (i.e., KNNL is not responsible for postal delay).

The officer competent to accept the tender shall have the right to reject any or all the tenders without assigning any reason whatsoever

The bidder should only submit / upload in KPP Portal portal platform genuine certificates/ documents, etc., that are as obtained from competent/ concerned authorities against each required eligible criteria

Bids submitted by all bidders in the process of bid evaluation will be opened even if, the bidder withdraws from the bidding process by not submitting the original documents for verification or for any other reason and the prices quoted by them will be looked into to ascertain if there is collusion amongst the bidders to determine the competitiveness of the L1 price quoted by other bidders, as per the decision by the KNNL Board.

The contractor should abide by the directions of government towards recovery of 1percent or as modified by Government from time to time Cess from the contractors bill under the provision of building and other construction worker welfare cess Act-1996.

The contractor should submit the Letter of Acceptance to the under signed office within the stipulated period as per the bid document failing which the tender shall be deemed as cancelled

Corrigendum will be published in the News Papers / Website for all modifications / corrections if any

Typographical errors, if any, will not be the ground for any claims by the contractor

The amount put to tender is exclusive of GST. The Contractor Should Quote the rates without GST

The GST of 18 % shall be paid to the tendered amount as per Govt order No PWD 65 RDF 2017 Dated: 11/10/2018 separately

In case of death of Contractor after execution of the agreement/ commencement of work his legal heir if any eligible registered contractor & willing can execute & complete the work as accepted tender rates irrespective of the cost of the work

The increase in GST shall not be paid in the extended period of Contract for which the Contractor alone is responsible for delay as determined by the authority while granting the extension of time

Debarment of tenderers: The procurement entity may debar tenderer for a period not exceeding 3 years from participation in its tenders following such procedures as may be prescribed on the ground that tenderer is engaged in corrupt or fraudulent practices in competing or executing the contract including misleading the procuring entity or any stage of procurement activity with a fraudulent intention. (KTPP Act 26A)

As per GO FD 5 EXP-12/2023 dated 15.05.2023, the contractor shall abide to provide e Bank Guarantee towards Security Deposits

The Contractor shall abide to pay any revision of GST during the tender period.

The Contractor shall also abide by the other conditions as laid down in the Bid document.

Royalty as per Govt. Circular No. MGD/DCB/2024-25/Bengaluru/ dated: 24.01.2025, issued by department of Mines and geology, Government of Karnataka and the subsequent government notification shall be paid by the contractor by the deduction from his bills. The schedule of royalty charges is annexed. The contractor shall produce the Material Dispatch Receipt (MDR) from department of Mines and Geology for exemption and shall be subjected to Govt Circular dated: 13.11.2024 (Annexed)

The contractor shall set up a laboratory at his own cost to test the materials used in the work

The detailed tender notification can be had from the KNNL website https://kppp.karnataka.gov.in and linking to e-tender or in the office of the undersigned

Further information/ Clarifications can be had from the under signed during office hours on telephone no: 08336-222163

All Contractors must obtain Employee Compensation Act (ECA) policy for the workers engaged under the works. KNNL will not be having any liabilities under the said Act provisions.

The contractor shall take the responsibility of 5 years O&M including 1 year defect liability period from the date of issue of certificate by the competent authority for successful commissioning of the project.

Technical Criteria

Past Experience

To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e. 2021-22 to 2025-26 The Contractor should have satisfactorily completed (at least 90% of the contract value) as a prime contractor for at least one similar work (concrete structures such as RCC Retaining wall /Bridge / Barrage, Riverbank Protection Work, along with Rigid Pavement andFlexible pavement, etc) of value not less than Rs. 2442.28Lakhs. Work Done Certificate issued by concerned Engineer and counter signed by Superintending Engineer should be uploaded. An additional weightage of 10% each year will be added to the cost of work done to bring it to present price level.

Work Done Certificate

To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e. 2021-22 to 2025-26. To qualify for award of this contract, executed for a continuous period of 12 months the following minimum quantities of work. (i) Earth work Excavation (Embankment or both put together) 49600 cum, (ii) GSB-1668 Cum, (iii) WMM/WBM 4270 Cum, (iv) PCC/RCC (Minimum of M15 grade)-7700 Cum., (v) Steel-246 Tonne, (vi) BM/DBM/BC/SDBC/MSS-710 Cum

Work Done Certificate

Capabilities of Vendor

Each Tenderer should further Demonstrate i) Availability by owning at least 50% of the required / specified key and critical equipment for this work. ii) The remaining 50% can be deployed on lease / hire basis for all works, provided the relevant documents (commitment agreements etc.) for this work are furnished.Sl No Details of Machinery/Equipment Total-Own-Hire/Lease 1) Self-loader 4.00 cum capacity 2-1-3, 2) Transit Mixer 3-3-6, 3) Tippers 10-10-20, 4) Excavator like JCB & Hitachi 3-3-6, 5) Water Tanker 2-2-4, 6) Plate Vibrator 2-2-4, 7) Pump set (10 HP) 3-3-6, 8) Vibratory Roller 2-1-3 and 9) Hot Mix Plant Batch mixing plant (Minimum Capacity of 40/60 TPH 1-0-1

Others -- Each Tenderer should further Demonstrate

Financial Status

To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e. 2021-22 to 2025-26. b. Each tender in his name should have in the last five years period (i.e. 2021-22 to 2025-26 achieved in at least two financial years an average annual financial turnover of not less than equivalent to the amount of Rs. 4884.55 Lakhs. The financial turnover shall be certified by the registered Chartered Accountant. All documents certificates issued by Chartered Accountant should have a UDIN generated through the ICAI portal. Any such certificate withoutUDIN shall not be considered and shall be treated as invalid document). Financial turnover of previous years shall be given a weight of 10Percent per year to bring them to the price level of the FY 2026-27.

Audited CA Certificate of Annual Turnover

To qualify for award of this contract, liquid assets and or availability and credit facilities of not less than Rs. 1465.37 Lakhs (credit lines /letter of credit/certificate from banks for meeting the fund requirements, etc).

Line of Credit

Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender capacity-(AxNx1.5- B) where, A-Maximum value of civil engineering works executed in any one year during the last five years(Updated to 2026-27 price level) taking into account the completed as well as works in progress. N-Number of years prescribed for completion of the works for which tenders are invited. B-Value, Value, at 2026-27 price level of existing commitments and on-going works to be completed during the next 24months (Period of completion of the works for which tenders are invited)

Others -- Bid Capacity

Fee & Financial Details

Tender Fee Amount

₹7,500

EMD Fee Amount

₹41.4 L

Important Dates

Last Activity

6 Jun 2026

Published

6 Jun 2026

Bid Opening

20 Jun 2026

Download Ends

12 Jun 2026

Pre-Bid Meeting

12 Jun 2026

BOQ Preview

•

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete,wood work, steel work, including T&P and scaffolding wherever nece...

•

Cutting of Trees, excluding removal of stumps and roots of trees. Girth from 300 mm to 600 mm

•

Cutting of Trees, excluding removal of stumps and roots of trees, Girth above 1800 mm

•

Removal of stumps and roots including backfilling with suitable material to required compaction, Girth from 300 mm to 600 mm

•

Removal of stumps and roots including backfilling with suitable material to required compaction, Girth above 1800 mm

•

Clearing Grass and Removal of Rubbish & dumping to outside periphery by manual means.

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

•

Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacte...

•

Cutting and removing jauliflora bushes upto 1.50 m girth excluding removal of stumps and including burning or disposing off the materials

•

Cutting and removing jauliflora bushes above 1.50 m upto 3.00 m girth excluding removal of stumps and including burning or disposing off the materials as directed with all other ancillary operations c...

•

Providing and placing sand bags consisting of empty cement bags filled with 35 to 40 kg locally available sand for forming ring bund including cost of all materials, labour, plugging joints with selec...

•

Filling clayey soil between two rows of sand bags placed for forming ring bund including cost of all materials, labour,tamping, plugging leakage points and all other ancillary operations complete.

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Excavation for foundation in hard rock of all toughness including boulders above 0.6 m diameter ( 0.113 m3 ) for dam, spillway, intake structure, surface power house and other appurtenant structures b...

•

Drilling 50 mm dia. holes vertical or inclined upto 10 degrees to vertical in rock / masonry / concrete by percussion drilling method using waggon drill or any other suitable equipment including cost ...

•

Flushing grout holes of all sizes with water and air jets alternatively for an average period of 30 minutes and observing water intake after flushing including cost of all materials, machinery, labour...

•

Grouting with neat cement grout mix of suitable consistency under specified grout pressure as directed in drilled holes by stage grouting method including cost of all materials, machinery, labour, red...

•

Providing and fixing 25 mm dia 2.75 m long ribbed steel anchor rods with one end split and driven firmly using steel wedge into 1.25 m deep 38 mm dia hole drilled in bed rock and other end provided wi...

•

Preparing foundation bed for masonry or concrete by removing all loose material by wedging / chiselling and disposing off the same as directed and cleaning the surface with air and water jet including...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

•

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

•

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping / welding joints, ty...

•

Providing rubble stone/boulder filling between or behind abutment below apron including cost of all materials, labour, hand packing, finishing top surface & all necessary works as directed and complet...

•

Providing and constructing dry size stone pitching using 200 to 250 mm size stones with pin headers at 2 per m2 using stones and stone chips from approved source including cost of all materials, labou...

•

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...

•

Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two coats on new work including preparing the surface after thorougly cleaning oil, grease,...

•

Providing, fitting and fixing mild steel railing complete as per drawing and Technical Specification

•

Providing and constructing contraction joints by fixing 230 mm wide central bulb type PVC water stop in single line supported by 10 mm dia. steel dowel rods on either side at 1 metre interval includin...

•

Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications. (Batching Plant)

•

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification

•

Providing and foming expansion joint for spillway bridge consisting of 75 x 75 x 6 mm angles 2 numbers provided with 250 mm long 12 mm dia. anchors fixed to both flanges at 150 mm c / c and 140 x 6 mm...

•

Providing and fixing in position 20 mm thick premoulded joint filler in expansion joint for fixed ends of simply supported spans not exceeding 10 m to cater for a horizontal movement upto 20 mm, cover...

•

Providing and fixing GI pressure relief pipe with one end closed by perforated GI plate and other end provided with alluminium lid hinged to pipe including cost of all materials, labour, drilling 8 mm...

•

Providing and forming 350x 350 x 400 mm deep filter drain consisting of 75 mm thick 10 mm down coarse aggregate layer around pressure relief pipe and 75 mm thick sand layer around coarse aggregate lay...

•

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with PVC Pipe 110mm outer dia at 2 kg per m2, extending through the full width of the structure with s...

•

Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than ...

•

Design, fabrication, supply, erection, testing and commissioning of vertical lift sliding type all interchangeable ( except bottom element ) stoplog gate elements consisting of skin plate, horizontal ...

•

Design, fabrication, supply, erection and commissioning of embedded parts consisting of sill beam, wheel tracks, seal seats, guide rails, breast wall liner ( upto one vent height plus 1 m above the ro...

•

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...

•

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

•

Filling available excavated earth ( excluding rock ) in sides of foundations upto plinth in layers not exceeding 20 cms. in depth, compacting each deposited layer by ramming after watering with lead u...

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

•

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

•

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

•

Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nomin...

•

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

•

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying add...

•

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work...

•

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

•

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal exp...

•

Providing and laying flooring with burnt stone slabs 10 cms thick rough chistle dressed on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3, , including cost of materials, mortar...

•

Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification. - Boulder Laid ...

•

Providing and constructing un-coursed rubble stone masonry with approved stones in CM 1 : 4 proportion by volume portions of return walls/ abutments/ similar structure including cost of all materials,...

•

Providing and constructing gabion structures for erosion control, river training works and protection works with wire crates of size 2 m x 1 m x 0.3 m each divided into 1m compartments by cross nettin...

•

Providing and constructing vertical /inclined graded filter media using clean, hard graded sand and coarse aggregates from approved source satisfying specified filter criteria in layers of specified t...

•

Providing casing embankment using semi-pervious / pervious soil collected in embankment area in heaps as part of disposal of excavated soil from canal in layer of 250 to 300 mm (before compaction) inc...

•

Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction.

•

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

•

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...

•

Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on p...

•

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ra...

•

Pavement Quality Concrete using paver - M30 GradeConstruction of M30 Grade un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with OPC @ 270 kg/m3 and GGBS@ 90 kg/m3...

•

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...

•

A. Type - A, "W" : Metal Beam Crash BarrierProviding and erecting a "W" metal beam crash barrier system comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed ...

•

Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification. As per MoRT &H Technical Specification Clause 2504 .

•

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications.A Stone/Boul...

•

Providing Cement mortar 1:3 (1 cement : 3 fine sand) including cost of all materials, labour and usage charges of machinery complete as per the direction of engineer incharge of work.

•

Cast in Situ Cement Concrete M 20 Kerb with ChannelConstruction of cement concrete kerb with channel with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M10 grade f...

•

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectoris...

•

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2012 made of Class C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vi...

•

Direction and Place Identification Signs with size more than 0.9 m2 size Board.Providing and erecting direction and place identification retroreflectorised sign as per IRC:67:2022 made of high intensi...

•

Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67:2012 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick...

•

Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal ...

•

Supplying and installation of delineators (road way indicators,hazard markers, object markers), 80-100 cm high aboveground level, painted black and white in 15 cm wide strips,fitted with 80 x 100 mm r...

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

•

Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation,...

•

Boundary pillar / Guard StoneReinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting. Boundar...

•

Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead

•

Dismantling of Flexible pavements and disposal of dismantled materials and stacking serviceable and unserviceable materials separatelyII) By Mechanical Meansii) Granular courses

•

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...

•

Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70kg per m2 using mechan...

•

Providing and applying tack coat with VG-10 Bitumen using pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom. Tack coat on Bituminous surfa...

•

Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.4% by weight of mix, transported t...

•

Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight ...

•

Surface Drains in SoilConstruction of unlined surface drains of average crosssectional area 0.40 m2 in soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankme...

•

Cutting and burning or disposing off Apu / Jondu from marshy areas as directed with all other ancillary operations complete.

•

Excavation and removal of silt and silt mixed with sand from canal bed by manual means including disposing off the same in spoil bank or on the canal embankment in layers as directed with all other an...

•

Engaging Heavy Mazdoor for clearing debries encountered during removal of gates from vents after storage period etc., Complete with all leads and lifts and as per the directions of the Engineer-in-cha...

•

Engaging Watchman Complete with all leads and lifts and as per the directions of the Engineer-in-charge.

•

Removing the MS element stoplog Gate for Barrages/ Vented Dam including conveying of gates to Store Yard and Stacking as directed including cost of labour, & all necessary works as directed and comple...

•

Inserting the MS element stoplog Gate for Barrages/ Vented Dam including conveying of gates from Store Yard to Barrage/ Vented Dam as directed including cost of labour, & all necessary works as direct...

•

Supplying and fixing rubber seals of approved quality including cost of all materials, labour, removing existing worn out / damaged bulb type rubber seals from gates, cleaning surface, making holes in...

•

Cleaning gates / hoists / embedded parts for re-painting by removing rust, old paint, grease by using wire brush, scrubber, rust remover including cost of all materials, labour, machinery, scaffolding...

•

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

Royalty Rate.pdf

Others - Royalty Rates • 4.03 MB

Tender Purpose Drawings.pdf

Others - Drawings • 23.22 MB

Certificate_BCB.pdf

Others - Price variation Certificate • 0.12 MB

3888_Call-2 Final DTP_.docx

Tender Document • 8.65 MB

schedule B_3888.pdf

Others - Schedule B • 0.56 MB

Tender Notification_WI_3888_Call-2.docx

Others - Tender Notification • 0.64 MB

Ready to Participate?

Download all tender documents and submit your bid

Market Intelligence