REPAIR TO ROOFS, PURLINS, RAFTERS, FLOORING, JOINERY ETC TO CERTAIN BLDGS IN NAA UNDER GE (N) TEZPUR

Amount

Note 1: (Applicable for all parts/items) : The bidders/contractors are advised to read tender document, all drawings & all corrigendum/amendments and general condition of contracts before entry/quoting the rates. Note 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading of incorrect/ pre-revised BOQ shall be treated as non bonafide and rejected. Fixed credit has been given in technical documents which shall be taken into account during acceptance of bid/tender.

Dismantling asbestos cement sheets (corrugated, semicorrugated, plain etc. of any type) in roof coverings, walls, ridges etc. or of similar types complete in all respect as specified and directed.

Taking down shutters exc 1.0 sqm but not exc 2 Sqm each complete in all respect as specified and directed.

Taking down chowkats and shutters (without taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified and directed.

Taking down chowkats and shutters (without taking off shutters from the frame exc 1.5 sqm but n.exc 4 sqm each complete all as specified and directed.

Supplied and fixed 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete in all respect as specified and directed.

Supplied and fixed Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete in all respect as specified and directed.

Supplied and fixed Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete in all respect as specified and directed.

S & F 35mm thick, second class HW, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete in all respect as specified and directed.

Providing and fixing in position kitchen cup board box type as per design and directed of 550-600mm deep, fixed over wall with PVC gittie and screws/or in beneath of kitchen counter, kitchen cabinet in required sizes at site made out of 17-18mm thick one side decorative lamination and other side balancing lamination sheet consisting of carcass 17-18mm thick PVC sheet. Provision of shelves, shutters made out of 17-18mm thick one side decorative laminated PVC sheet , all required brackets, screws etc,. The panel shall be fabricated using adhesives and screws whereever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finish as per maufactures specifications and drawing including 15mmX20mm medium grade chrome finish piano hinge of requird length, magnet catcher, Al handle 100mm size all items each per shutter including taking down of existing box complete in all respect as specified and directed. Make: Rajshri Plastiwood, Sintex

Providing and fixing in position kitchen cup board box type as per design and directed of 250-300mm deep, fixed over wall with PVC gittie and screws/or in beneath of kitchen counter, kitchen cabinet in required sizes at site made out of 17-18mm thick one side decorative lamination and other side balancing lamination sheet consisting of carcass 17-18mm thick PVC sheet. Provision of shelves, shutters made out of 17-18mm thick one side decorative laminated PVC sheet , all required brackets, screws etc,. The panel shall be fabricated using adhesives and screws whereever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finish as per maufactures specifications and drawing including 15mmX20mm medium grade chrome finish piano hinge of requird length, magnet catcher, Al handle 100mm size all items each per shutter including taking down of existing box complete in all respect as specified and directed. Make: Rajshri Plastiwood, Sintex

Supplied and fixed in repair 10 liter capacity PVC valveless, syphonic action type, low level cistern, capacity , white, with inlet ball valve, float and handle including brackets & flush pipe of polyethylene complete in all respect as specified and directed.

S&F in repairs short body Bib taps of 15mm bore, fancy type CP finish cast copper alloy with crutch handle screwed down for iron pipes complete all as specified and directed.

S&F in repairs long body Bib taps of 15mm bore, fancy type CP finish cast copper alloy with crutch handle screwed down for iron pipes complete all as specified and directed.

S & F coloured 0.50mm thick pre- painted galvalume aluminium zinc coating GI based trapezoid profile steel sheet having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws with bitumen washer to truss members of any material complete in all respect as specifified and directed.

S & F pre-painted galvalume aluminium zinc coating GI based (trapezoid profile) steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in ridge or valley gutter or of similar type used in roofs fixed with self tapping screws with bitumen washers and necessary mild steel flat iron supports at every 1m distance as sepcified and directed. (to be measured as flat)

S & F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in eves covering or of similar type, fixed with self tapping screws including necessary mild steel flats and screws for fixing with framed structure complete in all respect as specifified and directed.

M&L for ceramic coloured digital printed floor tiles of size area exc. 0.11Sqm and not exc 0.18Sqm X7-8mm thick set and jointed in neat cement slurry and pointed with white cement with pigment to match the tile colour over and including 15mm thick screed bedding in CM 1:6 including dismantling of floor tiles with cement mortar bedding of any thickness upto PCC/RCC surface and rubbish off the premises complete in all respect as specified and directed.

M&L for Glazed ceramic coloured wall tiles of size area exc. 0.06Sqm and not exc. 0.16Sqm X7-8mm thick set and jointed in neat cement slurry and pointed with white cement with pigment to match the tile colour over and including 15mm thick screed bedding in CM 1:4 complete including dismantling of wall tiling including cement mortar bedding of any thickness upto brick/PCC/RCC wall surface and rubbish off the premises complete in all respect as specified and directed.

Providing and laying heavy duty non-skid coloured digital printed floor tiles of size 300mm300mm X8-10mm thick set and jointed in neat cement slurry and pointed with white cement with pigment to match the tile colour over and including 15mm thick screed bedding in CM 1:6 and dismantalling of existing tiles/blocks of any description complete in all respect as specified and directed. Make: Somany (Heavy duty), Johnson (Endura), Orient Bell (Pavers)

Supply and fixed 4mm thick Sheet glass, ordinary quality and glazing with oil putty as required in square n exc 0.5 sq. m in each pane including taking down of existing glass complete in all respect as specified and directed.

Supply and fixed 4mm thick Sheet glass, figured/frosted glass and glazing with oil putty as required in square n exc 0.5 sq. m in each pane including taking down of existing glass complete in all respect as specified and directed.

Supply and Fix exposed GI powder coated snap grid frame work for false ceiling in flat or in sloping , of grid size 600x600mm comprising of wall/cleat angle of size 25x25x0.35mm and cross tee of size 24x38x0.70mm with 4mm dia GI wire as suspender and including 4mm thick decorative pre -painted non asbestos board (E-Board) in false ceiling including fixing arrangement from steel/wooden truss of any type including dismantalling of existing false ceiling complete all as specified and directed. (Make: Eternit, Everest or equivalent)

M&L 10mm thick plastering on brick/stone/concrete surafces of ceiling in CM (1:3) finished even and smooth without using extra cement including taking down of existing plaster/rendering complete in all respect as specified and directed.

Material and labour for 15mm thick plastering on brick/stone/concrete surafces of wall in CM (1:6) finished even and smooth without using extra cement including taking down of existing plaster/rendering complete in all respect as specified and directed.

Material and labour for 15mm thick plastering on brick/stone/concrete surafces of wall in CM (1:4) finished even and smooth without using extra cement including taking down of existing plaster/rendering complete in all respect as specified and directed.

S & F mild steel sections (Beam, tee, angle, channel or flat sections) in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing, independent fixing with welding etc. including distance pieces, cleats etc. using Fe 410-W (Gde E-250) quality A complete in all respect as specifified and directed.

S & F rolled/hollow section as in framing for door/vent/CB chowkhats and the like fixed with angle cleat and connecting plates complete (Butt hinges shall be measured and paid for separately) complete in all respect as specified and directed.

Providing and laying for cement concrete in coping, hold fasts using type B-1, 1:2:4 (using 20mm nominal size crushed and graded stone aggregate) or of similar work, etc. including necessary form work complete in all respect as specifified and directed.

Supply and fixed 75mm size of butt hinges stainless steel complete in all respect as specified and directed.

Supplied and fixed Aluminium anodised, barrel tower bolts of extruded section and fixed 200mm complete in all respect as specified and directed.

Supplied and fixed Aluminium handle cast type anodised 125 mm size complete in all respect as specified and directed.

Material and labour for preparation of old wooden surfaces of any description not otherwise described, over 10 Cm width or girth and applying two coats of synthetic enamel paint complete all as directed and specified.

Material and labour for preparation of old painted steel surface of any description not otherwise described, over 10 Cm width or girth and applying two coats of synthetic enamel paint complete in all respect as specified and directed.

M&L painting two coats of synthetic enamel paint on new un decorated wooden surface over 10cm width or girth, including one coat of pink primer & preparation of surface complete in all respect as specified and directed.

Supply & Fixed 100mm size of butt hinges medium weight, cold rolled mild steel complete in all respect as specified and directed.

Supplied and fixed aluminium anodised sliding door bolts with hasp and staple (bolt type) 16mm dia bolt 250mm long complete in all respect as specified and directed.

S & F Galvanised mild steel wire cloth, 0.43mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete in all respect as specified and directed.

S & F in repair galvanised mild steel wire cloth, 0.43mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples in door or windows complete in all respect as specified and directed.

Material and labour for complete removal of existing treatment on wall and applying two coats of oil bound distemper and finished another one coat with spunge roller over one coat of alkali resistant priming paint over 2mm thick (in two layers), wall care putty complete in all respect as specified and directed.

Material and labour for complete removal of existing treatment over walls and applying two coat of weather coat over 2mm thick wall care putty (in two layers) and a coat of primer including rubbing etc. and all necessary preperation complete in all respect as specified and directed.

Material and labour for preparation of newly undecorated plastered surface of wall and applying two coats of oil bound distemper and finished another one coat with spunge roller over one coat of alkali resistant priming paint over 3mm thick (in two layers), wall care putty complete in all respect as specified and directed.

Material and labour for preparation of newly undecorated plastered surface of wall and applying three coats of cement based paint over one coat of alkali resistant priming paint complete in all respect as specified and directed.

Preparaing old decorated plastered or unplastered surface of ceiling and apply two coats of white wash complete in all respect as specified and directed.

Supply and fixed two layered of any colour rotational moulded made out from LLDPE material water storage tanks of capacity 500 ltr (cylindrical vertical with closed top) including three tank nipples and unions of PPR material 25mm outer dia and one dead plug, hoisted and fixed in position including dismantling/ taking down all as specified in SSR Part I complete in all respect as specified and directed.

Supply and fixed PTMT ball valve high pressure 20mm bore dia with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete in all respect as specified and directed. Make: Prayag, Symet, Shakti

S & F in repair Wash hand basins, vitreous China of size 550 x400mm(flat back or angle back type), including cutting for and pinning in ends of brackets over new angle iron erecting stand embedded in PCC (1:2:4) block including 32mm dia bore waste fitings cast copper alloy chromium plated with long screwed shanks and flynuts flange and beded in redlead cement, PVC waste pipe including 15mm bore dia fancy type CP finish Pillar tap, cast copper alloy with capstan heads, screwed down high presuure, with or without lettered hot or cold with long screwed shanks and fly nuts, screwed for iron pipes complete all as specified and directed.

S&F in repairs vitreous china wash down water closet Pan (pedastal pattern) white including plastic water closet seat, white, closed pattern with flat bottom, and mild steel chromium plated hinging device (exclusive flushing cistern and flush pipe) complete all as specified and directed.

S& F in repairs white vitreous china squatting pan of size 580x440 mm,"ORISSA PATTERN" with 'P' or 'S' trap bedded in cement concrete (Exclusive flushing cistern and flush pipe) with integral foot rests complete all as specified and directed.

M&L for coloured vitrified tiles light shade 9-11mm thick in floor. area of tile not exc. 0.36sqm each set and jointed in neat cement slurry and pointed with white cement with pigment to match the shade of tile over and including screed bedding 15mm in CM 1:6 complete including dismantling of floor tiles with cement mortar bedding of any thickness upto PCC/RCC surface and rubbish off the premises complete in all respect as specified and directed.

M&L for coloured vitrified tiles light shade 9-11mm thick in wall, dado etc area of tile not exc. 0.36sqm each tile area set and jointed in neat cement slurry and pointed with white cement with pigment to match the shade of tile over and including 10mm thick screed bedding in CM 1:4 including dismantling of wall tiling including cement mortar bedding of any thickness upto brick/PCC/RCC wall surface and rubbish off the premises complete in all respect as specified and directed.

M/S KAUSHICK CONSTRUCTION

Shree Krishna Traders