e-tender for the Interior Fitout and Furniture Works for Conference Room at Pathanamthitta

Amount

Interior Fitout and Furniture Works for Conference Room at Pathanamthitt For more details refer tender documents.

Supplying and fixing of False ceiling with 12.5 mm Gyp-board, necessary GI section and finishing off by providing a smooth joint free surface with joining compound, fibre tape etc.

Providing and fixing Wooden panelling using a combination of 6 mm, 9 mm and 18 mm BWR Grade Plywood overlaid with 1 mm laminate. Rate quoted shall include all material, labour charges, cost of conveyance etc

Glass Door: Towards the cost of supply, fabrication & erection of toughened 10 mm Glass door using OZONE or equivalent patch fittings, floor spring, SS handles & Lock

Painting wall, partition wall and ceiling with plastic emulsionpaint of approved quality & colour two coats by roller / sprayer after finishing with wall putty 2 coats and cement primer. Rate quoted shall include all material, labour charges, cost of conveyance etc.

Flush door : Providing and fixing in position Flush door overlaid with 1mm laminate Rate quoted shall include all material, labour charges, cost of conveyance etc

Supplying and fixing decorative washable wallpaper including all material and labour charge etc

Providing and fixing all window in position Roller Blinds, including all standard fitments and fabric. Rate quoted shall include all material, labour charges, cost of conveyance etc.

Supplying and fixing Syenthetic carpet on existing floor including all material and labour charge etc

Supplying and fixing Accoustic Paneling with Fully Perforated Gypsum Plaster Board of size 600 x600x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer incharge and as permanufacturer's specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60

Providing and fixing Sound absorption panel with Resin Bonded Fibre glass wool conforming to IS : 8183, density 24kg / m3, 50mm thick, wrapped in 200 G Virgin Polythene bags,fixed to ceiling /paneling with metallic cleats @ 60 cm and wire mesh of 12.5 mm x 24 gauge wire mesh, for top most ceiling /paneling including all materials and labour charges etc

Providing and fixing Dais made of a combination of 35mmx25mm M/S frame work and BWR grade , 12 , mm plywood of approved quality and make; All exposed EXTERIOR portions of the plywood will be finished with paint .The rate will include all other necessary hardware and Adhesive etc.

U' SHAPED CONFERENCE TABLE : Providing & fixing U Shaped conference table of size 10650 mm (l) x 600 mm (w) x 750 mm (h); Table top made of 25 mm PLB board with 2mm edge banding. Table will have wire dump system underneath for access to LAN & Electrical cables. Table top to be supported on pre-laminated gable ends and modesty panels.

Providing and fixing in place table of size 1200 mm x 600 mm x 700 mm made of a combination of BWR grade 6 mm, 12 mm and 18 mm plywood of approved quality and make; All exposed EXTERIOR portions of the plywood will be finished with 1mm thick Laminate of approved make and shade. The inside portion of the table will be finished with 0.8mm laminate. The rate will include all other necessary hardware.

Providing and fixing in place table of size 2400 mm x 600 mm x 700 mm made of a combination of BWR grade 6 mm, 12 mm and 18 mm plywood of approved quality and make; All exposed EXTERIOR portions of the plywood will be finished with 1mm thick Laminate of approved make and shade. The inside portion of the table will be finished with 0.8mm laminate. The rate will include all other necessary hardware.

Sound system for Conerence hall[ sl.no.15.01-20.01] Chair man Unit/Ahuja/Cmc5100

Deligate unit/Ahuja/Cmd5200

Amplifier/Ahuja/ Cma5400

Wallspeaker /Ahuja/Ps400t

Wireless Mic/Ahuja/520V2

Installation including all accessaries

Supplying Dias chair with hydraulic lifting mechanism and tilt lock and shodded on metal star legs with castors.

Supplying Medium back Conference chair with hydraulic lifting mechanism and tilt lock and shodded on metal star legs with castors.

Supplying Low back chair with hydraulic lifting mechanism and tilt lock and shodded on metal star legs with castors.

Towards the cost of Electrical wring wherever necessory drawing new lines for Conference room, including all material and lbour charges etc

Supply and fixing 300mmx300mmLED panel lights, wherever necessory including all materials and labour charges etc

Supply and fixing 1.5 ton Split A/c including all material and labour charges etc complete.

Supply and fixing 5 kv stabilizer including all materials and labour charges etc

Supply and fixing outdoor stand including all materials and labour charges etc

Supply and fixing copper Pipe installation for split A/c including all materials and labour charges etc complete

Ambience