SITC of 125 KVA DG Set along with EI work at Kakdwip SDH

Amount

SITC of 125 KVA Silent type DG Set comprising of engine with genset controller and alternator both on a common base complete with Fual Tank, Residential Silencer, AVM Pads, Batterys with its leads, First fill of lube oil, AMF Control Panel & Acoustic Enclosure having following specification . Generator Set Specification :- Duty : Prime , Power Rating : 125 KVA, No. of Phases : 3 Ph , Output Voltage : 415 Volt, Frequency : 50Hz, Power Factor : 0.8 (Lagging), Current Range : 173 A, Speed : 1500 RPM

Engine Specification: - CUMMINS / KIRLOSKAR / GREAVES POWER / MAHINDRA & MAHINDRA LTD. / ASHOK LEYLAND / EICHER(VECV), MoEF Certified Power : 155 - 159 HP Cooling : Water Cooled / Liquid Cool, Aspiration : Turbochanged., No. Of Cylinders : 4 - 6 in-line, Bore x Stroke : 102mmx120mm (Minimum), Fuel : High Speed Diesel, Fuel Tank Capacity Range : ≥ 215 Litres, Fuel Consumption @ 75% load with radiator and fan : ≤ 22.4 Liter/ Hour, Fuel Consumption @ 100% load with radiator and fan : ≤ 30.35 Liter/ Hour, Performance class of generator set : ISO 8528, Starter motor rated voltage : 12 V DC

Alternator Specification :- Make : STAMFORD / KEC / CG / LEROY SOMER / LEY POWER, Enclosure : IP 23, Voltage Regulation : ±1%, Class of Insulation : H Class, Max. Un-balance Load accross Phase : ≤ 25% of rated current Mounting Arrangement :- Engine & Alternator are to be mounted on a common MS fabricated base frame with AVM pads., Acoustic Enclosure :- The acoustic enclosure is made of 1.6 mm thick CRCA sheet in Munsel shade and the structure should be in sheet metal base frame.The acoustic enclosure is specially designed to meet stringent MoEF /CPCB of 75 dBA @ 1 mtr at 75 % load under free field condition. High quality noise absorbant and fire-retardant grade. Acoustic Insulation material ( Foam) complying to IS 8183. Two point Lifting for easy handling at costomer site. 11 tank pretreatment process and UV resistant Powder coating of all parts to withstand extreme environment.

(xi) Aux Relay, 2C/O, 230V AC(Make-Salzer or Equivalent)-02 Nos (xii) Aux Relay, 2C/O, 12V DC(Make-Salzer or Equivalent)-01 No (xiii) 3Phase Voltage Monitoring Relay ,415V AC(Make-Omron or Equivalent)-01 No (xiv) ON Delay Timer,Coil Voltage 230V AC,0-180SEC, Electronic(Make-Teknik/Reputed or Equivalent) -02 Nos (xv) Automatic Battery Charger, I/P-230V AC, O/P-12VDC, 8A (Make-Mahamai or Equivalent)-01 No.

TERMS & CONDITIONS

(i) Rate should be quoted inclusive of all applicable taxes and Duty etc.

(ii) All materials, equipments & accessories must conform to relavent IS / IEC specifications. The DG Set to be supplied must be from the authorized OEM of the respective Engine Manufacturer.

(iii) Nacessary manufacturer's test certificate for Desiel Engin, Alternator etc. Will have to submit in triplicate copy during delivery of the equipment.

(iv) Copy of "Type Approval Certificate" and Certificate of "COP" must be produced at the time of delivery issued from competant Authority (As per CPCB-II).

(v) Circuit Diagram for AMF Panel must be submited from the Manufacturer/OEM.

(vi) The entire set must be warranted atleast 15 months from the date of Delivery/12 months/ 5000 Hrs from the date of Commissioning whichever is earlier. However Engine & Alternator should be warranted of 2 years/5000 Hrs, whichever is earlier.

Making Brick foundation and R.C. casting having size 3500 mm x1800 mm x 950 mm and making neat cement finish after plastering for installation of D. G. Set as per direction of E.I.C.

S & F Exhaust pipe of 100 mm./ Standard dia. MS black pipe incl. connection with the existing silencer attached with the flexible coupler and S & F flange, bend, reducer, gasket, nuts, bolts and washers etc. and necessary fixing materials etc. as reqd. (from DG Exhaust to Silencer & where ever necessary) with suitable painting. (As per CPCB Norm)

S & F Exhaust pipe of 150 mm. dia. MS black pipe (Thickness: 4 mm.) incl. S & F flange, bend, reducer, gasket, nuts, bolts and washers etc. and necessary fixing materials etc. as reqd. with suitable painting (As per CPCB Norm) from Silencer to top of the building roof.

Making insulation by 2" Fire & Heat proof PU Foam, wire mesh and Aluminum cladding work :- (As per CPCB Norm)

i) 100 mm. dia. Exhaust pipe

ii) 150 mm. dia. Exhaust pipe

iii) Residential type silencer pipe

S & F special type MS angle iron bracket support made of 40X40X6 mm. MS angle with flat iron U clamp with nuts, bolts & washers etc. as necessary. (If necessary)

S & F rain protection canopy.

S & delivery of 200 ltrs. Heavy gauge MS sheet barrel.

S & delivery of best quality oil hand pump with 1” dia PVC flexible pipe (12’ft approx.)

Earthing with 50 mm (2”) dia GI pipe x 3.64 mtr. Thick x 3.04 mtrs. Long with nuts, bolts & washers etc. as to GS (2 nos. for DG, 2 nos. for AMF panel). (In excess over the standard supply)

S & Laying 1.1KV Gr. 4Core 120 Sq. mm. XLPE Ar./Al. Cable with 2 Nos. 10 SWG G.I wire incl. interconnections as per direction of EIC., :- (In excess over the standard supply)

(i) On Wall fixed by S & F of MS saddle

(ii) Through Underground trench

Supplying and fixing 415V, 200A, TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc. incl. S & F 3 nos. DIN type HRC fuse as per rating (Make: L&T/Siemens) as per GS.

Supply and fixing black PVC heat shrink sleeve for covering the 50 x 6 mm. GI flat.

S & laying of 1 x 50 sq.mm. Single core flexible copper wire in suitable size flexible PVC pipe on wall / floor from neutral earth bus to DG set neutral point including both side socketing.

S & F of 80mm dia. MS pipe with MS structure for holding & supporting the Exhaust Pipe & silencer unit, as directed by EIC.

Supply & Laying of PVC insulated multi stranded 7 Core Cu. Control Cable as required through 20 mm dia. HD type PVC Rigid conduit fixed by GI saddle.

S & F E.I. Danger Board (Size-- 20 cm. X 30 cm.)

Supply & Delivery of Diesel oil for commissioning of 125KVA DG Set.

Note: 1) All the above rates should be quoted inclusive of the all taxes & duties, Labour welfare cess, and incl cost of maintenance, servicing, supply & replacement of spares for 3 (three) years from the date of commissioning. 2) Total is rounded off to the nearest rupee and inclusive of Labour Welfare Cess @1% on total amount of above items as applicable.

PIONEER AUTOMOBILE SERVICES

Sohum Industrial Sales Corporation