DEPOSIT Restoration work of JJM road cutting on Kakkodi Puthiyangadi road between ch 0 000 to 1500 Restoration work of JJM road cutting on Kakkodi Puthiyangadi road General Civil Work

Amount

Appendix A

3.6:Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m

OD261184/2023-2024:Filling with granular material on trench as per drawing and technical specification

OD261143/2023-2024:Construction of granular sub-base by providing graded material, spreading in uniform layers with a motor grade on a prepared surface, mixing by mix in-place method with rotavator at OMC, and compacting with a plate compactor to achieve the desired density, complete as per clause401. Grading-V- For sub base cum drainage layer - Mix in place method.

OD261188/2023-2024:providing laying spreading and compacting graded stone aggregate wet mix macadam specification including premix in the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site ,laying in uniform layers with in subbase base course on well prepared surface and compacting with plate compactor to achieve the desired density

5.1.a:Providing and applying primer coat with bitumen emulsion ( SS) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 - 1.0 kg/sqm using mechanical means.

5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

OD261234/2023-2024:Mixed Seal Surfacing Manual means - Type A - Bitumen VG30 Providing , laying and rolling of close graded premix surfacing material of 20mm thickness composed of 11.2mm to 0.9mm (Type-A) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant laying and rolling with a three wheel 8-10KN static roller and finishing to required level and grades as per technical specification.

8.13:Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads on Bituminous Surface @ 250 gms per sqm area, the thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform, and free from streaks and holes.

M.T ABDUL BASHEER

ARJUN GOPAL P

MALABAR UNION LABOUR CONTRACT CO-OPERATIVE SOCIETY LTD

Bidder Name

MOOSSA M

M.T ABDUL BASHEER

MALABAR UNION LABOUR CONTRACT CO-OPERATIVE SOCIETY LTD

ARJUN GOPAL P